Abstract
In order to proactively prevent accidents and injuries in construction, tertiary safety education should equip students with adequate safety knowledge and skills. However, in most construction curricula, safety is considered a low priority, and safety education is delivered in isolation, without sufficient interaction and practical experience to improve safety learning. On the other hand, anatomical theory in medicine has been adopted by and proved advantageous to various scientific disciplines. With this regard, this study presents an interactive construction safety education system using building anatomy modelling (BAM) based on the integration of anatomical theory and state-of-the-art visualization technologies. The BAM system comprises two modules: (1) knowledge acquisition module, which delivers safety knowledge to students; and (2) practical experience module, which enables students to interact with BAM to improve their hazard identification and elimination skills. The building anatomy concept (BAC) and BAM prototype are evaluated through interactive system trials with educators and learners. Findings suggest the BAC has significant pedagogic potential, and the proposed system can effectively provide safety knowledge and interactively support the development of practical safety skills of learners.
Similar content being viewed by others
References
Korean Statistical Information Service. http://kosis.kr/. Accessed 10 Dec 2015
Yoon, S.J., Lin, H.K., Chen, G., Yi, S., Choi, J., Rui, Z.: Effect of occupational health and safety management system on work-related accident rate and differences of occupational health and safety management system awareness between managers in South Korea’s construction industry. Saf. Health Work 4(4), 201–209 (2013). https://doi.org/10.1016/j.shaw.2013.10.002
Zhao, D., Lucas, J.: Virtual reality simulation for construction safety promotion. Int. J. Inj. Contr. Saf. Promot. 22(1), 57–67 (2015). https://doi.org/10.1080/17457300.2013.861853
Lin, K.Y., Son, J.W., Rojas, E.M.: A pilot study of a 3D game environment for construction safety education. J. Inf. Technol. Constr. 16, 69–84 (2011)
Le, Q.T., Pedro, A., Lim, C.R., Park, H.T., Park, C.S., Kim, H.K.: A framework for using mobile based virtual reality and augmented reality for experiential construction safety education. Int. J. Eng. Educ. 31(3), 713–725 (2015)
Le, Q.T., Pedro, A., Park, C.S.: A social virtual reality based construction safety education system for experiential learning. J. Intell. Robot. Syst. 79, 487–506 (2015). https://doi.org/10.1007/s10846-014-0112-z
Wu, T.C.: The roles and functions of safety professionals in Taiwan: comparing the perceptions of safety professionals and safety educators. J. Saf. Res. 42(5), 399–407 (2011). https://doi.org/10.1016/j.jsr.2011.09.002
Jackson, B.J.: Construction Management Jump Start, 2nd edn. John Wiley and Sons, Indianapolis (2010)
McLachlan, J.C., Bligh, J., Bradley, P., Searle, J.: Teaching anatomy without cadavers. Med. Educ. 38(4), 418–424 (2004). https://doi.org/10.1046/j.1365-2923.2004.01795.x
Petersson, H., Sinkvist, D., Wang, C., Smedby, Ö.: Web-based interactive 3D visualization as a tool for improved anatomy learning. Anat. Sci. Educ. 2(2), 61–68 (2009). https://doi.org/10.1002/ase.76
Biodigital. https://www.biodigital.com/. Accessed 10 Apr 2016
Arezes, P.M., Swuste, P.: Occupational health and safety post-graduation courses in Europe: a general overview. Saf. Sci. 50(3), 433–442 (2012). https://doi.org/10.1016/j.ssci.2011.10.003
Jaeger, M., Adair, D.: Construction safety simulations and students’ perception of stress. Eng. Educ. 23, 26 (2012). https://doi.org/10.1155/2007/78970
Rowlinson, S.: Construction Safety Management Systems, 1st edn. Routledge, United Kingdom (2004)
Pedro, A., Le, Q.T., Park, C.S.: Framework for integrating safety into construction methods education through interactive virtual reality. J. Prof. Issues Eng. Educ. Pract. 142(2), 040150111–040150119 (2015). https://doi.org/10.1061/(ASCE)EI.1943-5541.0000261
Tsai, C.W., Shen, P.D., Chiang, Y.C., Lin, C.H.: How to solve students’ problems in a flipped classroom: a quasi-experimental approach. Univ. Access Inf. Soc. 16(1), 225–233 (2016). https://doi.org/10.1007/s10209-016-0453-4
Behzadan, A.H., Kamat, V.R.: Enabling discovery-based learning in construction using telepresent augmented reality. Autom. Constr. 33, 3–10 (2013). https://doi.org/10.1016/j.autcon.2012.09.003
Tsai, C.W., Shen, P.D., Fan, Y.T.: The application of augmented reality in online education: a review of studies published in selected journals from 2003 to 2012. Int. J. Inf. Commun. Technol. Educ. 10(2), 75–80 (2014). https://doi.org/10.4018/ijicte.2014040107
Shirazi, A.R., Behzadan, A.H.: Content delivery using augmented reality to enhance students’ performance in a building design and assembly project. Adv. Eng. Educ. 4(3), 1–24 (2015)
Sampaio, A.Z., Martins, O.P.: The application of virtual reality technology in the construction of bridge: the cantilever and incremental launching methods. Autom. Constr. 37, 58–67 (2014). https://doi.org/10.1016/j.autcon.2013.10.015
Li, H., Lu, M., Hsu, S.C., Gray, M., Huang, T.: Proactive behavior-based safety management for construction safety improvement. Saf. Sci. 75, 107–117 (2015). https://doi.org/10.1016/j.ssci.2015.01.013
Sugand, K., Abrahams, P., Khurana, A.: The anatomy of anatomy: a review for its modernization. Anat. Sci. Educ. 3(2), 83–93 (2010). https://doi.org/10.1002/ase.139
De Looze, K.: Interweaving fragments of ethical publicity and ethical resistance: the quest for cadaver organs in India. Contemp. South Asia 21(3), 304–317 (2013). https://doi.org/10.1080/09584935.2013.826629
Hancock, D., Williams, M., Taylor, A., Dawson, B.: Impact of cadaver dissection on medical students. N. Z. J. Psychol. 33(1), 17–25 (2004)
Dempster, M., Black, A., McCorry, N., Wilson, D.: Appraisal and consequences of cadaver dissection. Med. Educ. Online 11(16), 1–9 (2006). https://doi.org/10.3402/meo.v11i.4592
Andersen, S.A., Mikkelsen, P.T., Konge, L., Cayé-Thomasen, P., Sørensen, M.S.: Cognitive load in mastoidectomy skills training: virtual reality simulation and traditional dissection compared. J. Surg. Educ. 73(1), 45–50 (2016). https://doi.org/10.1016/j.jsurg.2015.09.010
Zhao, Y.C., Kennedy, G., Yukawa, K., Pyman, B., O’Leary, S.: Can virtual reality simulator be used as a training aid to improve cadaver temporal bone dissection? Results of a randomized blinded control trial. The Laryngoscope 121(4), 831–837 (2011). https://doi.org/10.1002/lary.21287
Ferracani, A., Pezzatini, D., Seidenari, L., Del Bimbo, A.: Natural and virtual environments for the training of emergency medicine personnel. Univ. Access Inf. Soc. 14(3), 351–362 (2015). https://doi.org/10.1007/s10209-014-0364-1
United States Department of Labor. https://www.osha.gov/oshstats/commonstats.html. Accessed 05 Jan 2016
Virvou, M., Katsionis, G.: On the usability and likeability of virtual reality games for education: the case of VR-ENGAGE. Comput. Educ. 50(1), 154–178 (2008). https://doi.org/10.1016/j.compedu.2006.04.004
Acknowledgements
This work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIP) (No. NRF-2016R1A2B3016694).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Pham, H.C., Pedro, A., Le, Q.T. et al. Interactive safety education using building anatomy modelling. Univ Access Inf Soc 18, 269–285 (2019). https://doi.org/10.1007/s10209-017-0596-y
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10209-017-0596-y