Skip to main content
Log in

Leaching of heavy metals by citric acid from fly ash generated in municipal waste incineration plants

  • ORIGINAL ARTICLE
  • Published:
Journal of Material Cycles and Waste Management Aims and scope Submit manuscript

Abstract

The leaching behavior of heavy metals from municipal waste incineration (MWI) fly ash was investigated in this study. The leaching process includes two steps, i.e., fly ash was firstly washed with water, and then subjected to citric acid leaching. The main parameters of the washing process such as liquid/solid ratio, washing time, and number of washing were tested. The optimum conditions for water washing were found as follows: washing time 5–10 min, liquid/solid ratio 10:1 (ml:g), and number of washing was twice; under these conditions, 86% Na, 70% K, 12% Ca, 1.2% Al, and 0.5% Pb were removed from the fly ash in the prewashing. From the results of screening tests of leaching lixiviants, citric acid was found to be the most effective leaching agent, taking account of its environmentally benign characteristics. Optimum metal extraction can be achieved with citric acid under the following conditions: pH 3.0, liquid/solid ratio 40 (ml:g), citric acid concentration 0.10 mol/dm3, contact time 20 min at room temperature.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Scheme 1
Fig. 7

Similar content being viewed by others

References

  1. Nagib S, Inoue K (2000) Recovery of lead and zinc from fly ash generated from municipal incineration plants by means of acid and/or alkaline leaching. Hydrometallurgy 56(3):269–292

    Article  Google Scholar 

  2. Hong KJ, Tokunaga S, Ishigami Y, Kajiuchi T (2000) Extraction of heavy metals from MSW incinerator fly ash using saponins. Chemosphere 41(3):345–352

    Article  Google Scholar 

  3. Katsuura H, Inoue T, Hiraoka M, Sakai S (1996) Full-scale plant study on fly ash treatment by the acid extraction process. Waste Manag 16(5–6):491–499

    Article  Google Scholar 

  4. Izumikawa C (1996) Metal recovery from fly ash generated from vitrification process for MSW ash. Waste Manag 16(5–6):501–507

    Article  Google Scholar 

  5. Nabeshima Y (1996) Summary of research on waste minimization studies by Japan waste research foundation (JWRF). Waste Manag 16(5–6):407–415

    Article  Google Scholar 

  6. Zhang FS, Itoh H (2006) Extraction of metals from municipal solid waste incinerator fly ash by hydrothermal process. J Hazard Mat 136(3):663–670

    Article  Google Scholar 

  7. Guerrero A, Fernandez E, Macias A, Goni S (2000) Hydrothermal treatment of fly ash from municipal solid waste incineration. Waste Manag Ser 1:178–185

    Article  Google Scholar 

  8. Zhang FS, Itoh H (2006) A novel process utilizing subcritical water and nitrilotriacetic acid to extract hazardous elements from MSW incinerator fly ash. Sci Total Environ 369(1–3):273–279

    Article  Google Scholar 

  9. Ishigaki T, Nakanishi A, Tateda M, Ike M, Fujita M (2005) Bioleaching of metal from municipal waste incineration fly ash using a mixed culture of sulfur-oxidizing and iron-oxidizing bacteria. Chemosphere 60(8):1087–1094

    Article  Google Scholar 

  10. Paul M, Sandstrom A, Paul J (2004) Prospects for cleaning ash in the acidic effluent from bioleaching of sulfidic concentrates. J Hazard Mat 106(1–2):39–54

    Article  Google Scholar 

  11. Seidel A, Zimmels Y, Armon R (2001) Mechanism of bioleaching of coal fly ash by thiobacillus thiooxidans. Chem Eng J 83(2):123–130

    Article  Google Scholar 

  12. Krebs W, Brombacher C, Bosshard PP, Bachofen R, Brandl H (1997) Microbial recovery of metals from solids. FEMS Microbiol Rev 20(3–4):605–617

    Article  Google Scholar 

  13. Wu HY, Ting YP (2006) Metal extraction from municipal solid waste (MSW) incinerator fly ash—chemical leaching and fungal bioleaching. Enzym Microbial Tech 38(6):839–847

    Article  MathSciNet  Google Scholar 

  14. Kinoshita T, Yamaguchi K, Akita S, Nii S, Kawaizumi F, Takahashi K (2005) Hydrometallurgical recovery of zinc from ashes of automobile tire wastes. Chemosphere 59(8):1105–1111

    Article  Google Scholar 

  15. Saito C, Okada H, Titus MJ, Yoshioka T, Mizoguchi T (2007) Leaching of heavy metals from fly ash generated from gasification and melting furnace for municipal solid wastes by organic acids. Jpn Soc Waste Manag Expert 18:157–166 (in Japanese)

    Article  Google Scholar 

  16. Nugteren HW, Jurkovicova MJ, Scarlett B (2001) Improvement of environment quality of coal fly ash by applying forced leaching. Fuel 80(6):873–877

    Article  Google Scholar 

  17. Fuoco R, Ceccarini A, Tassone P, Wei Y, Brongo A, Francesconi S (2005) Innovative stabilization/solidification processes of fly ash from an incinerator plant of urban solid waste. Microchem J 79(1–2):29–35

    Article  Google Scholar 

  18. Smichowski P, Marrero J (1998) Comparative study to evaluate the effect of different acids on the determination of germanium by hydride generation-inductively coupled plasma atomic emission spectrometry. Anal Chim Acta 376(3):283–291

    Article  Google Scholar 

  19. Hong KJ, Tokunaga S, Kajiuchi T (2000) Extraction of heavy metals from MSW incinerator fly ashes by chelating agents. J Hazard Mat 75(1):57–73

    Article  Google Scholar 

  20. Wang J, Ban H, Teng XJ, Wang H, Ladwig K (2006) Impact of pH and ammonia on the leaching of Cu(II) and Cd(II) from coal fly ash. Chemosphere 64(11):1892–1898

    Article  Google Scholar 

  21. http://www.okumuragumi.co.jp/news/2003/tukeoki.htm

  22. Di PL, Mecozzi R (2007) Heavy metals mobilization from harbour sediments using EDTA and citric acid as chelating agents. J Hazard Mat 147(3):768–775

    Article  Google Scholar 

  23. Yuan SH, Xi ZM, Jiang Y, Wan JZ, Wu C, Zheng ZH, Lu XH (2007) Desorption of copper and cadmium from soils enhanced by organic acids. Chemosphere 68(7):1289–1297

    Article  Google Scholar 

  24. Van Gerven T, Cooreman H, Imbrechts K, Hindrix K, Vandecasteele C (2007) Extraction of heavy metals from municipal solid waste incinerator (MSWI) bottom ash with organic solutions. J Hazard Mat 140(1–2):376–381

    Article  Google Scholar 

  25. Zhu SJ, Hou HB, Xue YJ, Wei N, Sun Q, Chen XL (2007) Modeling adsorption of copper(II) onto fly ash and bentonite complex from aqueous solutions. J Colloid Interface Sci 315(1):8–12

    Article  Google Scholar 

  26. Hojamberdiev M, Kameshima Y, Nakajima A, Okada K, Kadirova Z (2007) Preparation and sorption properties of materials from paper sludge. J Hazard Mat 151(2–3):710–719

    Google Scholar 

  27. Okada K, Shimazu M, Kameshima Y, Nakajima A, MacKenzie KJD (2007) Simultaneous uptake of Ni2+, NH4 + and PO4 3− by amorphous compounds. J Colloid Interface Sci 305(2):229–238

    Article  Google Scholar 

Download references

Acknowledgments

We are indebted to Taiheiyo Cement Corp., Japan for providing the fly ash sample.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Katsutoshi Inoue.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Huang, K., Inoue, K., Harada, H. et al. Leaching of heavy metals by citric acid from fly ash generated in municipal waste incineration plants. J Mater Cycles Waste Manag 13, 118–126 (2011). https://doi.org/10.1007/s10163-011-0001-5

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10163-011-0001-5

Keywords

Navigation