Abstract
The Spanish UNE 150301 standard was used as a basic reference point in paving the way for the ISO 14006 ecodesign standard. This article aims to analyze the pioneering UNE 150301 standard, as well as its adoption process and its practical results in the lift industry. Since the UNE 150301 standard is in a very early stage of dissemination, an empirical study based on a qualitative methodology has been designed. An exploratory case study has therefore been carried out with the participation of a company from the lift industry which is, in fact, the first Spanish industrial company to have adopted the aforementioned ecodesign standard. The company subjected to analysis has integrated ecoindicators into the design process to analyze the environmental impact of its products on each stage of their life cycle. Using these ecoindicators, the company has observed that the main impact is evident in the usage stage, due to energy consumption. The company has managed to improve products by means of a continuous improvement process, with reductions in terms of both cost and environmental impact. The adoption of the standard UNE 150301 can be a useful tool in reducing the environmental impact of the products and in obtaining some competitive advantages, such as cost reduction, improvement in energy efficiency of the product, and a better adaptation to laws and regulations.
Similar content being viewed by others
References
AENOR (2003) Gestión ambiental del proceso de diseño y desarrollo. Ecodiseño, UNE 150301. AENOR, Madrid
Arana G, Heras I (2010) Adopción de la norma UNE 150301 de Ecodiseño. Un estudio de casos. DYNA Ingeniería e industria 85:652–661
Arana G, Heras I, Bernardo M (2010) La promoción de la integración de sistemas de Gestión. El caso del programa Eraikal. Qualitas Hodie 147:42–48
Arana-Landin G, Heras-Saizarbitoria I (2011) Paving the way for the ISO 14006 ecodesign standard: an exploratory study in Spanish companies. J Clean Prod 19(9–10):1007–1015
Bare JC (2010) Life cycle impact assessment research developments and needs. Clean Technol Environ Policy 12(4):341–351
Bengoetxea C (2007) Desarrollo sostenible: una visión integradora. DYNA Ingeniería e Industria 82(7):342–346
Boehm WA (2008) Vertical mobility energy efficiency of lifts. Presentation to REHVA supporters seminar, Berlin
BSI (2002) ISO/TR14062:2002, environmental management—Integrating environmental aspects into product design and development. British Standards Institution, London
Cerdan C, Gazulla C, Raugei M, Martinez E, Fullana-i-Palmer P (2009) Proposal for new quantitative eco-design indicators: a first case study. J Clean Prod 17(18):1638–1643
Chiang SY, Wei CC, Chiang TH, Chen WL (2011) How can electronics industries become green manufacturers in Taiwan and Japan. Clean Technol Environ Policy 13(1):37–47
Eisenhardt K (1989) Building theories from case study research. Acad Manag Rev 14(4):532–550
Fernández-Alcalá JM (2007) Ecodiseño: Integración de criterios ambientales en la sistemática del diseño de productos industriales. DYNA Ingeniería e Industria 82(7):351–360
Heras I (2006) ISO 14001 y otros estándares de gestión: pasado, presente y futuro. Editorial Civitas, Madrid
Heras I, Arana G, Díaz de Junguitu A, Espí MT, Molina JF (2008) Los Sistemas de Gestión Medioambiental y la competitividad de las empresas de la CAPV. Instituto Vasco de Competitividad, Bilbao
Hischier R, Baudin I (2010) LCA study of a plasma television device. Int J Cycle Assess 15:428–438
Ihobe (2008) De la UNE 150.301 a la ISO 14006: Gestión ambiental del proceso de diseño y de desarrollo. III Encuentro de empresas en Ecoinnovación. Ihobe, Bilbao
Ihobe (2010) Guías sectoriales de ecodiseño. Ihobe, Bilbao
ISO (2006) ISO 14040:2006 environmental management-life cycle assessment—principles and framework. ISO, Geneva
ISO (2011) ISO 14006:2011 environmental management systems—guidelines for incorporating ecodesign. ISO, Geneva
Jong-Hwan E, Ji-Ho S, Jeong-Min M, Jong-Shik C (2009) Integration of life cycle assessment in the environmental information system. Int J Life Cycle Assess 14:364–373
Justel-Lozano D (2008) Metodología para la eco-innovación en el diseño para el desensamblado de productos industriales. Universitat Jaume I, Castellón
Knight P, Jenkins J (2009) Adopting and applying eco-design techniques: a practitioners perspective. J Clean Prod 17(5):549–558
Lamelle P (2007) Lifts working group. ISO, Geneva
Lofthouse VA (2004) Investigation into the role of core industrial designers in ecodesign projects. Des Stud 25(2):215–227
Mahlia TMI, Yantia PAA (2010) Cost efficiency analysis and emission reduction by implementation of energy efficiency standards for electric motors. J Clean Prod 18(4):365–374
Maxwell J (2005) Qualitative research design. An interactive approach. Sage, Thousand Oaks
Michelsen O, Fet AM (2010) Using eco-efficiency in sustainable supply chain management; a case study of furniture production. Clean Technol Environ Policy 12(5):561–570
Muñoz I, Gazulla C, Bala A, Puig R, Fullana P (2009) LCA and ecodesign in the toy industry: case study of a teddy bear incorporating electric and electronic components. Int J Cycle Assess 14:64–72
Platcheck ER, Schaeffer L, Kindlein W, Candido LHA (2008) Methodology of ecodesign for the development or more sustainable electro-electronic equipments. J Clean Prod 16(1):75–86
Sanchez I, Pulido H, McNeil MA, Turiel I, Della Cava M (2007) Assessment of the Impacts of Standards and Labeling Programs in Mexico. Lawrence Berkeley National Laboratory, Berkeley
Tischner U, Dietz B (2000) The toolbox: useful tools for ecodesign. How to do ecodesign. A guide for environmentally and economically sound design. German Federal Environmental Agency, Berlin
Viñoles R, Bastante MJ, Pacheco B, Collado D, Ruescas A (2008) Diseño para el fin de vida de pequeños electrodomésticos. Caso de estudio de cepillos dentales eléctricos. DYNA Ingeniería e Industria 83(8):507–515
Yin RK (2003) Case study research: design and methods. Sage, Thousand Oaks
Acknowledgments
This article is a result of the work carried out within a Research Group funded by the Basque Autonomous Government (IT423-10).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Arana-Landin, G., Heras-Saizarbitoria, I. & Cilleruelo-Carrasco, E. A case study of the adoption of a reference standard for ISO 14006 in the lift industry. Clean Techn Environ Policy 14, 641–649 (2012). https://doi.org/10.1007/s10098-011-0427-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10098-011-0427-4