Skip to main content

Advertisement

Log in

Laboratory characterization of sandy soil water content during drying process using electrical resistivity/resistance method (ERM)

  • Original Paper
  • Published:
Bulletin of Engineering Geology and the Environment Aims and scope Submit manuscript

Abstract

Drought-induced evaporation can reduce soil water content and significantly alter soil hydro-mechanical behavior. Understanding the temporal and spatial distribution characteristics of soil water content during evaporation is of great significance for evaluating the encountered geotechnical and geo-environmental problems in arid or semi-arid regions. In this study, an electrical resistivity/resistance method (ERM) with a high spatial resolution of centimeter-level was developed for a small-scale laboratory test and applied to quantitatively characterize the evaporation-induced water content variations along a depth gradient. A total of 8 groups of initially saturated sandy soil columns (84 mm in diameter and 290 mm in height) were prepared, and eight pairs of mini electrodes (3.5 mm in diameter) were installed in each soil sample with a vertical distance of 30 mm. The soil columns were subjected to continuous drying. The changes in soil electrical resistance at different depths were monitored by the electrode couples. The gravimetric water contents at different depths were also measured at the end of drying. It is found that soil water content decreases exponentially with increasing electrical resistance. Based on the obtained data, a calibration relationship between soil gravimetric water content and corrected electrical resistance was well established with consideration of temperature effect. This relationship was validated successfully by the experimental results, indicating the feasibility of the developed ERM to characterize the soil water content dynamics during the drying process. Besides, the drying process with the movement of the evaporation front was discussed. The results of this study demonstrate the good performance of ERM in the estimation of temporal and spatial variations of soil water content and its potential application in arid or semi-arid regions with frequent droughts.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10

Similar content being viewed by others

References

Download references

Funding

This work was supported by the National Key Research and Development Program of China (2019YFC1509902), the National Natural Science Foundation of China (Grant No. 41925012, 41902271, 41572246, 41772280), Natural Science Foundation of Jiangsu Province (BK20171228, BK20170394), and the Fundamental Research Funds for the Central Universities.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Chao-Sheng Tang.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

An, N., Tang, CS., Cheng, Q. et al. Laboratory characterization of sandy soil water content during drying process using electrical resistivity/resistance method (ERM). Bull Eng Geol Environ 79, 4411–4427 (2020). https://doi.org/10.1007/s10064-020-01805-y

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10064-020-01805-y

Keywords

Navigation