Skip to main content

Advertisement

Log in

Rock toppling failure mode influenced by local response to earthquakes

  • Original Paper
  • Published:
Bulletin of Engineering Geology and the Environment Aims and scope Submit manuscript

Abstract

Earthquake waves influence rock toppling stability, and the effects of local earthquake propagation and topographic also affect slope deformation. Detailed engineering geology conditions of slopes are obtained and a geomechanical characterization of rock topplings is performed. To study the input earthquake waves and slope interactions, a dynamic analysis is performed using the UDEC 4.0 discrete element method (DEM) numerical code under viscoplastic conditions. The earthquake signals are representative of different peak ground acceleration, Arias intensities, and frequencies, and are used in the study of different rock topplings with different height, slope angle, and strata dip angle. The derived outputs are processed for the earthquake propagation study and to assess the induced deformation mechanisms in terms of resulting displacements, plastic zone features, and deformation mode. The results prove that an interaction exists between stratigraphic and topographic effects on earthquake wave propagation, and that these effects cannot be assessed independently. The obtained results describe the effect of topography and geological settings in rock topplings, amplifying or de-amplifying earthquake ground motion, and demonstrate that the tensile state dominates at the slope surface but evolves with depth. A shear state dominates at the toe or in the deep part of rock topplings. The rock toppling deformation mode may develop into a composite of tension fractures at the crest and sliding at depth. Compared with the static scenario, under earthquake load, tensile deformation evolves over a larger area at the crest and develops a shear zone at the toe and in the substrata. The necessary earthquake-induced toppling conditions are discussed, and the UDEC 4.0 DEM method and conventional pseudostatic approach are compared. This study shows there are a broader range of deformations inside the slope.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13

Similar content being viewed by others

References

  • Alzo’ubi AK, Martin CD, Cruden DM (2010) Influence of tensile strength on toppling failure in centrifuge tests. Int J Rock Mech Min Sci 47:974–982

    Article  Google Scholar 

  • Ashford SA, Sitar N, Lysmer J, Deng N (1997) Topographic effects on the earthquake response of steep slopes. Bull Seismol Soc Am 87:701–709

    Google Scholar 

  • Babiker AFA, Smith CC, Gilbert M, Ashby JP (2014) Non-associative limit analysis of the toppling-sliding failure of rock slopes. Int J Rock Mech Min Sci 71:1–11

    Google Scholar 

  • Bird JF, Bommer JJ (2004) Earthquake losses due to ground failure. Eng Geol 75:147–179

    Article  Google Scholar 

  • Bobet A (1999) Analytical solutions for toppling failure. Int J Rock Mech Min Sci 36(7):971–980

    Article  Google Scholar 

  • Bouckovalas GD, Papadimitriou AG (2005) Numerical evaluation of slope topography effects on earthquake ground motion. Soil Dyn Earthq Eng 25(7):547–558

    Article  Google Scholar 

  • Bozzano F, Lenti L, Martino S, Montagna A, Paciello A (2011) Earthquake triggering of landslides in highly jointed rock masses: reconstruction of the 1783 Scilla rock avalanche (Italy). Geomorphology 129:294–308

    Article  Google Scholar 

  • Bray JD, Rathje EM, Member ASCE (1998) Earthquake induced displacements of solid waste landfills. J Geotech Geoenviron Eng 124:242–253

    Article  Google Scholar 

  • Chigira M, Wu X, Inokuchi T, Wang G (2010) Landslides induced by the 2008 Wenchuan earthquake, Sichuan, China. Geomorphology 118:225–238

    Article  Google Scholar 

  • Goodman RE, Bray JW (1976) Toppling of rock slopes. In: Proceedings of the specialty conference on rock engineering for foundations and slopes, vol 2. American Society of Civil Engineering, Boulder, CO. pp 739–760

  • Huang R, Zhao J, Nengpan J, Li G, Lee ML, Li Y (2013) Analysis of an anti-dip landslide triggered by the 2008 Wenchuan earthquake in China. Nat Hazards 68:1021–1039

    Article  Google Scholar 

  • Itasca (2004) UDEC-Universal Distinct Element Code (Version 4.0). Itasca Consulting Group, Minneapolis

    Google Scholar 

  • Jiao Y-Y, Tian H-N, Wu H-Z, Li H-B, Tang H-M (2014) Numerical and experimental investigation on the stability of slopes threatened by earthquakes. Arab J Geosci. doi:10.1007/s12517-014-1509-5

    Google Scholar 

  • Jibson RW (1993) Predicting earthquake-induced landslide displacements using Newmark’s sliding block analysis. Transp Res Rec 1411:9–17

    Google Scholar 

  • Jibson RW (2007) Regression models for estimating coseismic landslide displacement. Eng Geol 91:209–218

    Article  Google Scholar 

  • Kokusho T, Koyanagi T, Yamada T (2014) Energy approach to earthquakeally induced slope failure and its application to case histories supplement. Eng Geol 181:290–296

    Article  Google Scholar 

  • Kuhlemeyer RL, Lysmer J (1973) Finite element method accuracy for wave propagation problems. J Soil Mech Found Div ASCE 99(SM5):421–427

    Google Scholar 

  • Lenti L, Martino S (2012) The interaction of earthquake waves with step-like slopes and its influence on landslide movements. Eng Geol 126:19–36

    Article  Google Scholar 

  • Lenti L, Martino S (2013) A parametric numerical study of the interaction between seismic waves and landslides for the evaluation of the susceptibility to seismically induced displacements. BSSA 103(1):33–56

    Google Scholar 

  • Liu CH, Jaksa MB, Meyers AG (2008) Improved analytical solution for toppling stability analysis of rock slopes. Int J Rock Mech Min Sci 45(8):1361–1372

    Article  Google Scholar 

  • Martino S, Mugnozza GS (2005) The role of the earthquake trigger in the Calitri landslide (Italy): historical reconstruction and dynamic analysis. Soil Dyn Earthq Eng 25:933–950

    Article  Google Scholar 

  • Mohtaramin E, Jafari A, Amini M (2014) Stability analysis of slopes against combined circular-toppling failure. Int J Rock Mech Min Sci 67:43–56

    Google Scholar 

  • Nichol SL, Hungr O, Evans SG (2002) Large-scale brittle and ductile toppling of rock slopes. Can Geotech J 39(4):773–788

    Article  Google Scholar 

  • Pal S, Kaynia AM, Bhasin RK, Paul DK (2012) Earthquake stability analysis of rock slopes: a case study. Rock Mech Rock Eng 45:205–215

    Article  Google Scholar 

  • Pritchard MA, Savigny KW (1990) Numerical modelling of toppling. Can Geotech J 27:823–834

    Article  Google Scholar 

  • Rathje EM, Bray JD (2000) Nonlinear coupled seismic sliding analysis of earth structures. J Geotech Geoenviron Eng 126:1002–1014

    Article  Google Scholar 

  • Rizzitano S, Cascone E, Biondi G (2014) Coupling of topographic and stratigraphic effects on earthquake response of slopes through 2D linear and equivalent linear analysis. Soil Dyn Earthq Eng 67:66–84

    Article  Google Scholar 

  • Romeo R (2000) Seismically induced landslide displacements: a predictive model. Eng Geol 58(3/4):337–351

    Article  Google Scholar 

  • Sagaseta C, Sánchez JM, Cañizal J (2001) A general analytical solution for the required anchor force in rock slopes with toppling failure. Int J Rock Mech Min Sci 38(3):421–435

    Article  Google Scholar 

  • Saygili G, Rathje EM (2008) Empirical predictive models for earthquake-induced sliding displacements of slopes. J Geotech Geoenviron Eng ASCE 134(6):790–803

    Article  Google Scholar 

  • Scholtès L, Donzé F-V (2012) Modelling progressive failure in fractured rock masses using a 3D discrete element method. Int J Rock Mech Min Sci 52:18–30

    Article  Google Scholar 

  • Wasowski J, Del Gaudio V (2000) Evaluating earthquakeally induced mass movement hazard in Caramanico Terme (Italy). Eng Geol 58:291–311

    Article  Google Scholar 

  • Yagoda Biran G, Hatzor YH (2013) A new failure mode chart for toppling and sliding with consideration of earthquake inertia force. Int J Rock Mech Min Sci 64:122–131

    Google Scholar 

  • Zhang Z, Liu G, Wu S, Tang H, Wang T, Li G, Liang C (2015) Rock slope deformation mechanism in the Cihaxia Hydropower Station, Northwest China. Bull Eng Geol Environ 74:943–958

    Article  Google Scholar 

Download references

Acknowledgments

This study was sponsored by the Ministry of Science and Technology of China (No. 2012BAK10B02), National Natural Science Foundation of China (Nos. 41372374 and 41102165) and Project of China geological survey (No. 2120114035501). The authors express their sincere thanks to the anonymous reviewers and the editor for their invaluable help and guidance throughout this research.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Tao Wang.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Zhang, Z., Wang, T., Wu, S. et al. Rock toppling failure mode influenced by local response to earthquakes. Bull Eng Geol Environ 75, 1361–1375 (2016). https://doi.org/10.1007/s10064-015-0806-x

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10064-015-0806-x

Keywords

Navigation