Abstract
This report results from work that was first proposed to a meeting of the International Association of Engineering Geology (IAEG), Commission No.1 held in Bratislava (Slovakia) in 1992. Following the publication of the Commission’s report on Engineering Geological Maps (Engineering geological maps (1976) and reports on the description and classification of rock and soil and on recommended symbols for engineering geological mapping (Bull. Int. Assoc. Eng. Geol. 24 (1981) 235; see also 227), a period of consolidation ensued in which the approaches suggested in those reports were implemented. The decision to prepare an additional report reflected the increasing need to apply these approaches to a range of specific activities. The background to the report was provided in a paper by two of the authors presented at the IAEG conference in Athens in 1997 (Proc Int. Symp. Int. Assoc. Eng. Geol. Environ. 2 (1997) 2103).
Résumé
Ce rapport est dans la continuité du travail initié à Bratislava en 1992 et réalisé par la Commission No.1 de l’Association Internationale de Géologie de l’Ingénieur (AIGI). Suite à la publication d’un rapport de la Commission sur les Cartes de Géologie de l’Ingénieur (1976) et de rapports sur des recommandations relatives aux descriptions et classifications des roches et des sols et aux symboles à utiliser dans les Cartes de Géologie de l’Ingénieur (1981), une période de consolidation s’en est suivie, les approches suggérées dans ces rapports étant appliquées. La décision de préparer aujourd’hui un rapport supplémentaire reflète le besoin croissant d’appliquer ces approches à une gamme de domaines spécifiques. La base de ce rapport a été fournie par un article de deux des co-auteurs présenté à la conférence AIGI d’Athènes en 1997.
Similar content being viewed by others
References
Allen AR, Dillon A, O’Brien M (1997) Approaches to landfill site selection in Ireland. In: Marinos PG, Koukis GC, Tsiambaos GC, Stournaras GC (eds) Engineering geology and the environment. Proceedings of the International Symposium of the International Association for Engineering Geology and the Environment, Athens, vol 2. AA Balkema, Rotterdam, pp 1569–1574
Anon (1976) Engineering geological maps. A guide to their preparation. UNESCO Publishing House, Paris, pp 79
Anon (1981a) Rock and soil description and classification for engineering geological mapping. Report by the International Association of Engineering Geology Commission on Engineering Geological Mapping. Bull Int Assoc Eng Geol 24:235–274
Anon (1981b) Recommended symbols for engineering geological mapping. Report by the International Association of Engineering Geology Commission on Engineering Geological Mapping. Bull Int Assoc Eng Geol 24:227–234
Barisone G, Bottino G, Crivellari R (1994a) Technological characterization of piedmontese clays for waste disposal impermeabilization. In: Oliveira R, Rodrigues LF, Coehlo AG, Cunha AP (eds) Proceedings of the 7th Congress of the International Association of Engineering Geology, Lisbon, vol 4. AA Balkema, Rotterdam, pp 2463–2472
Barisone G, Bottino G, Crivellari R (1994b) Selection criteria for waste disposal location in Piedmont Region (Italy). Unpublished Report, Dipartimento Georisorse e Territorio, Politecnico di Torino, Torino, Italy
Beavers GH (1975) Research considerations—a land information system support program. The multi-scale data analysis and mapping program (MSDAMP) users guide: Land Use Analysis Laboratory. Iowa State University, Ames, lowa, p 124
Berg RC, Kempton JP, Stecyk AN (1984) Geology for planning in Boone and Winnebago counties Circular 531. Illinois Department of Energy and Natural Resources, State Geological Survey Division, Illinois
Bonham–Carter GF (1994) Geographic information systems for geoscientists: modelling with GIS. Longman Scientific and Technical, London, p 300
BSI (1992) BS 7567: Parts 1–3. Electronic transfer of geographic information. British Standards Institution, London
Burrough PA, McDonnell RA (1998) Principles of geographical information systems for land resources assessment. Oxford University Press, Oxford, p 333
Chacón J, Irigaray C, Boussouf S (1992) Caracterización geotécnica de la ubicación de un vertedero comarcal residuos solidos urbanos en la Depresion de Granada III Congreso Geológico de Espana y VIII. Congreso Latinoamericano de Geología. Actas tomo 2: 415–419, Salamanca.
Dion NP, Alvord RC, Olson TD (1986) Geologic, hydrologic and cultural factors in the selection for sites for the land disposal of wastes in Washington. United States Geological Survey, Water Resources Investigation Report 84–4279, Tacoma
Doerhoefer G, Siebert H (1998) The search for landfill sites—requirements and implementations in Lower Saxony, Germany. Environ Geol 35:55–65
Dorn M, Tantiwanit W (1999) The site searching process for waste disposal sites in the Chiang Mai–Lamphun Basin—delineation and presentation of the geological barrier. In: Khantaprab Ch (ed) Proceedings of the symposium on mineral, energy and water resources of Thailand: towards the year 2000. Bangkok, pp 386–396
Dorn M, Tantiwanit W (2001) New methods for searches for waste disposal sites in the Chiang Mai–Lamphun Basin, Northern Thailand. Environ Geol 40:507–517
Dorn M, Moulinier H, Mattausch P (2001) Die digitale Karte der Potenziellen Barrieregestein 1:200 000 als eine Instrument der Ersten Beurteilung bei der Umsetzung der Europäischen Wasserrahmenrichtlinie. Zeitschrift fur Angewandte Geologie 43:160–166
Eastman JR, Kyem PAK, Toledano J, Jin W (1993) GIS and decision making: explorations in geographic information systems technology: vol 4. UNITAR European Office, Geneva, p 116
Gartner JF (1979) Septic systems capability map, North Bay. Ontario Geological Survey, Northern Ontario Engineering Geological Terrain Study, Map 5044, scale 1:100,000
Griffin AR, Mather JD (1998) Landfill disposal of urban wastes in developing countries, balancing environmental protection and cost. In: Maund JG, Eddleston M (eds) Geohazards in engineering geology, vol 15. Engineering Geology Special Publication, Geological Society, London, pp 339–350
Hackett JE, McComas MR (1984) Geology for planning in McHenry County, Circular 531. Illinois State Geological Survey, Illinois
Holzer R, Letko V, Vlcko J (1993) Land suitability map for waste disposal sites. 1:50.000, Sheet Prievidza. Prepared by Comenius University for the Ministry of the Environment, Bratislava, Slovakia
Hrašna M (1991) Land suitability map for waste disposal sites. 1:200 000, Sheet Trnava. Prepared by Comenius University for the Ministry of the Environment, Bratislava, Slovakia
Hrašna M, Vlcko J (1994) Developments in engineering geological mapping in Slovakia. In: Oliveira R, Rodrigues LF, Coehlo AG, Cunha AP (eds) Proceedings of the 7th congress of the International Association of Engineering Geology, Lisbon, vol 2. AA Balkema, Rotterdam, pp 1231–1238
Hübel G, Mörth W, Proske H, Untersweg T (1989) Erkundung von geeigneten Deponiestandorten in der Steiermark aus geowissenschaftlicher Sicht. Unpublished Report, Joanneum Research, Graz
Irigaray C, Fernández T, Chacón J, El Amrani-Paaza N, Boussouf S (1994) GIS geotechnical and environmental assessment of site selection for urban waste disposal in the Granada District (Spain). In: Oliveira R, Rodrigues LF, Coehlo AG, Cunha AP (eds) Proceedings of the 7th congress of the International Association of Engineering Geology, Lisbon, vol 6. AA Balkema, Rotterdam, pp 4679–4686
Langer M (1995) Engineering geology and waste disposal: scientific report and recommendations of the International Association of Engineering Geology Commission No 14. Bull Int Assoc Eng Geol 51:5–29
NCDCDS (National Committee for Digital Cartographic Data Standards) (1988) The proposed standard for digital cartographic data. Am Cartographer, 15: 9–140.
Piyapanpong S (1997) Municipal solid waste treatment in Thailand. Paper 11, 4 February 1997. Pollution Control Department, Bangkok
Proske H, Vlcko J (1994) Production of hazard maps (maps for waste disposal sites). A working paper of the International Association of Engineering Geology Commission No.1. Unpublished Report, Graz-Bratislava
Proske H, Vlcko J (1997) Special purpose engineering geological mapping for the location of waste disposal sites. In: Marinos PG, Koukis GC, Tsiambaos GC, Stournaras GC (eds) Engineering geology and the environment, Proceedings of the international symposium of the International Association for Engineering Geology and the environment, Athens, vol 2. AA Balkema, Rotterdam, pp 2103–2106
Shumway LC, Brendel GF (1995) A methodology for siting waste disposal areas. GAI Consultants Inc, Monroeville, Pennsylvania (unpublished)
Tomlin CD (1990) Geographic information systems and cartographic modelling. Prentice-Hall, Englewood Cliffs, New Jersey p 249
Van Driel JN (1982) Map showing physical characteristics related to sanitary landfill siting in Fairfax County, Virginia. Miscellaneous Investigations Series, United States Geological Survey
Van der Wall R, Wiriosudarmo S, Zainal Abidin D (1992) Site selection for domestic waste disposal sites in the hilly surroundings of the Batujajar and Bandung Plains. Project CTA 108, Environmental Geology for Landuse and Regional Planning, Project Report No 24. Directorate of Environmental Geology, Bandung
Weinschenk M, Kaen K (1996) Chiang Mai’s solid waste management and its problems. Chiang Mai University, Chiang Mai, p 128 (Preliminary Draft)
Zuquette LV, Pejon OJ, Sinelli O (1994) Methodology of specific engineering geological mapping for selection of sites for waste disposal. In: Oliveira R, Rodrigues LF, Coehlo AG, Cunha AP (eds) Proceedings of the 7th congress of the International Association of Engineering Geology, Lisbon, vol 4. AA Balkema, Rotterdam, pp 2481–2489
Acknowledgments
The authors and editors acknowledge the long-term support of their employers (Joanneum Research, Graz, Comenius University, Bratislava, the Nottingham Trent University, the British Geological Survey and the British Government’s Office of the Deputy Prime Minister) for the preparation of this report. The comments and support of the following active members of Commission No. 1 of the International Association for Engineering Geology and the Environment are also particularly appreciated: J. Aguilar (Spain), J. Chacon (Spain), J. Hanisch (Germany), N. Rengers (Netherlands), N.J. Bejerman (Argentina), J. Gartner (Canada), M. Langer (Germany) and J.P. Venter (South Africa). Figures 1 and 2 are published with the permission of the Politecnico di Torino, Italy, Figs. 3–5 with the permission of the United States Geological Survey, Figs. 6–11 with the permission of the Department of Mineral Resources, Bangkok, Thailand, Fig. 12 with the permission of the Mines and Minerals Division of the Ministry of Northern Development and Mines, Ontario, Canada, Figs. 13–16 with the permission of Illinois State Geological Survey, Champaign, Illinois, United States of America, Figs. 17–19 with the permission of A A Balkema Publishers, Rotterdam, The Netherlands, Figs. 20–23 with the permission of the United States Geological Survey, Figs. 24–31 with the permission of the Directorate of Geological and Mining Area Environment, Bandung, Indonesia, Fig. 32 with the permission of Joanneum Research, Graz, Austria and Figs. 33–50 with the permission of the Division of Geology and Natural Resources, Ministry of the Environment, Slovakia.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Proske, H., Vlcko, J., Rosenbaum, M.S. et al. Special purpose mapping for waste disposal sites. Bull Eng Geol Environ 64, 1–54 (2005). https://doi.org/10.1007/s10064-004-0261-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10064-004-0261-6