Zusammenfassung
Das Hauptproblem im Prozess der Bildung geordneter Maschinenkonstruktionsfamilien ist die Erfüllung der Kopplungsrelationen zwischen den mitwirkenden Elementen. Werden diese nicht erfüllt, kommt es zu Konstruktionsfehlern. Damit es zu solch einem ungünstigen Zustand nicht kommt, sollten Methoden der Erfüllung von Kopplungsrelationen für zahlreiche Typenreihen von Elemente der Konstruktionsfamilie erarbeitet werden.
Abstract
The main problem of creating of the ordered families of machine constructions (series of types, module systems of constructions) is to satisfy the coupling relations between cooperating elements. If these relations are not satisfied constructional errors happens. To avoid this it is needed to elaborate the methods that satisfy coupling relations between numerous elements of an ordered family in the range of constructional forms and dimensions values.
Article PDF
Avoid common mistakes on your manuscript.
Abbreviations
- Pon{poi;(i=1,iz)}:
-
Sammlung von Bedürfnissen (–)
- Ksn{ksk;(k=1,kz)}:
-
Sammlung von Konstruktionen (–)
- SO n :
-
Allgemeine System (–)
- CK s :
-
Konstruktionsmerkmale (–)
- CCH c :
-
Charakteristische Merkmale (–)
- su n :
-
Detailliertes System (–)
- Ωw :
-
Fertigungskriterien (–)
- M I :
-
Eingangsmoment (Nm)
- M 0 :
-
Ausgangsmoment (Nm)
- M P :
-
Überlastungsmoment (Nm)
- \(\mathit{rks}_{n}^{z}\) :
-
Konstruktionslösung (–)
- RK n :
-
Konstruktionsfamilie (–)
- Πp :
-
Konstruktionsgestalt (–)
- RKs n :
-
Konstruktionslösungen der Konstruktionsfamilie (–)
- Re z :
-
Relation (–)
- L izo :
-
Linie der Konstruktionsfamilienstruktur (–)
- SW n :
-
Variantenstruktur der Konstruktionsfamilie (–)
- \(\mathit{wks}_{w}^{z}\) :
-
Konstruktionsvarianten (–)
- \(\mathit{tks}_{w}^{z_{r}}\) :
-
Typische Konstruktionslösung (–)
- \(\mathit{TK}s^{z_{r}}(r=1,\mathit{rz})\) :
-
Typische Konstruktionslösungen der Konstruktionsfamilie (–)
- l tks :
-
Zahl typischer Konstruktionslösungen (–)
- \(G\langle \mathit{tks}_{w}^{z_{r}}\rangle\) :
-
Graph typischer Konstruktionslösungen (–)
- \(G(\Pi_{rw}^{te_{j}})\) :
-
Graph der Kopplungsrelationen (–)
- ARej±1−ej:
-
Außenrelationen (–)
- IRej−ej:
-
Innenrelationen (–)
- \(W_{l}^{e_{j}}(l=1,\mathit{lv}_{j})\) :
-
l-tes Maß des e-ten Elementes (–)
- a(k):
-
Nummer der Verbindungsabmessung (–)
- rel(k):
-
Relation zwischen Abmessungen (–)
- b(k):
-
Nummer der Verbindung mit a(k) Abmessung (–)
Literatur
Dietrych J, Rugenstein J (1982) Einführung in die Konstruktionswissenschaft. Manuskript Nr. 1054. Gliwice
Franke JH, Hasselbach J, Huch J, Firchau N (2002) Variantenmanagement in der Einzel- und Kleinserienfertigung. Hanser, München/Wien
Gendarz P (2009) Hauptzuordnungen bei Modulbildungsprozessen von Konstruktionen. Forsch Ingenieurwes 73(4):245–255
Gendarz P (2009) Hauptzuordnungen bei Modulbildungsprozessen von Konstruktionen. Forsch Ingenieurwes 73:245–255
Gendarz P (2005) Seriengerechtes Konstruieren. In: Beiträge zum 16. Symposium „Design for X“. Neukirchen, 13.-14.10.2005, S 151–158
Gendarz P (1998) Berechnung von Abmessungen für die Entwicklung von Baureihen. Konstruktion 50(10):23–28
Gerhard E (1984) Baureihenentwicklung. Kontakt & Studium, Bd 105. Expert Verlag, Grafenaut
Schuh G (1998) Gestaltung und Bewertung von Produktvarianten – Ein Beitrag zur systematischen Planung von Serienprodukten. Fortschritt-Berichte VDI, Reihe 2: Fertigungstechnik. VDI-Verlag, Düsseldorf
Pahl G, Beitz W (1997) Konstruktionslehre, Methoden und Anwendungen. Springer, Berlin
Author information
Authors and Affiliations
Corresponding author
Additional information
Gebildet auf Grund des DAAD Stipendiums in TU Chemnitz (20.07.08–20.09.08) und des Forschungsprojektes N502087638.
Rights and permissions
Open Access This is an open access article distributed under the terms of the Creative Commons Attribution Noncommercial License (https://creativecommons.org/licenses/by-nc/2.0), which permits any noncommercial use, distribution, and reproduction in any medium, provided the original author(s) and source are credited.
About this article
Cite this article
Gendarz, P. Kopplungsrelationen im Prozess der Bildung geordneter Konstruktionsfamilien. Forsch Ingenieurwes 74, 175–184 (2010). https://doi.org/10.1007/s10010-010-0124-1
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10010-010-0124-1