Abstract
Chromium-sensitized titanium dioxide nanotubes (CTNT) with high photocatalytic activity were prepared by a chemical bath deposition technique. The resulting films were characterized by SEM, EDX, and XRD. Results showed that the fabricated films have the ordered nanotubes with diameter of 90–140 nm, wall thickness of 20–50 nm, and tube lengths in the range of 24 μm. Diffuse reflectance spectra showed an increase in the visible absorption relative to bare titanium dioxide nanotubes (TNT). The photoelectrochemical performance was examined under light irradiation in 1 M NaOH electrolyte. Photoelectrochemical characterization shows that chromium sensitizing efficiently enhances the photocatalytic water splitting performance of CTNT composite. The sample (C3TNT) exhibited better photocatalytic activity than the TNT and CTNT fabricated using other chromium concentrations. This inexpensive photoanodes prepared free of noble metals showed enhanced high photocurrent density with good stability and is a highly promising photoanode for solar hydrogen production.
Similar content being viewed by others
References
Zang Y, Li L, Xu Y, Zuo Y, Li G (2014) Hybridization of brookite TiO2 with g-C3N4: a visible-light-driven photocatalyst for As3+ oxidation, MO degradation and water splitting for hydrogen evolution. J Mater Chem A 2:15774–15780
Reyes-Gil KR, Robinson DB (2013) WO3-enhanced TiO2 nanotube photoanodes for solar water splitting with simultaneous wastewater treatment. ACS Appl Mater Interfaces 5:12400–12410
Momeni MM, Ghayeb Y, Davarzadeh M (2015) Single-step electrochemical anodization for synthesis of hierarchical WO3-TiO2 nanotube arrays on titanium foil as a good photoanode for water splitting with visible light. J Electroanal Chem 739:149–155
In S, Orlov A, Garcia F, Tikhov M, Wright DS, Lambert RM (2006) Efficient visible light-active N-doped TiO2 photocatalysts by a reproducible and controllable synthetic route. Chem Commun 40:4236–4238
Momeni MM, Ghayeb Y (2015) Photoelectrochemical water splitting on chromium-doped titanium dioxide nanotube photoanodes prepared by single-step anodizing. J Alloy Compd 637:393–400
Choudhury B, Choudhury A (2013) Structural, optical and ferromagnetic properties of Cr doped TiO2 nanoparticles. Mater Sci Eng B 178:794–800
Long R, English NJ (2011) Tailoring the electronic structure of TiO2 by cation codoping from hybrid density functional theory calculations. Phys Rev B 83:155209
Li S, Fu J (2013) Improvement in corrosion protection properties of TiO2 coatings by chromium doping. Corros Sci 68:101–110
Momeni MM, Ghayeb Y, Davarzadeh M (2015) Electrochemical construction of different titania-tungsten trioxide nanotubular composite and their photocatalytic activity for pollutant degradation: a recyclable photocatalysts. J Mater Sci Mater Electron 26:1560–1567
Sun S, Ding JJ, Bao J, Gao C, Qi ZM, Yang XY, He B, Li CX (2012) Photocatalytic degradation of gaseous toluene on Fe-TiO2 under visible light irradiation: a study on the structure, activity and deactivation mechanism. Appl Surf Sci 258:5031–5037
Khaleel A, Shehadi I, Al-Shamisi M (2010) Structural and textural characterization of sol-gel prepared nanoscale titanium-chromium mixed oxides. J Non-Cryst Solids 356:1282–1287
Ghasemi S, Rahimnejad S, Rahman Setayesh S, Rohani S, Gholami MR (2009) Transition metal ions effect on the properties and photocatalytic activity of nanocrystalline TiO2 prepared in an ionic liquid. J Hazard Mater 172:1573–1578
Lopez R, Gomez R, Oros-Ruiz S (2011) Photophysical and photocatalytic properties of TiO2-Cr sol-gel prepared semiconductors. Catal Today 166:159–165
Cracia F, Holgado JP, Caballero A, Gonzalez-Elipe AR (2004) Structural, optical, and photoelectrochemical properties of Mn+-TiO2 model thin film photocatalysts. J Phys Chem B 108:17466–17476
Dholam R, Patel N, Adami M, Miotello A (2009) Hydrogen production by photocatalytic water-splitting using Cr- or Fe-doped TiO2 composite thin films photocatalyst. Int J Hydrogen Energy 34:5337–5346
Jun TH, Lee KS (2010) Cr-doped TiO2 thin films deposited by RF-sputtering. Mater Lett 64:2287–2289
Pan L, Zou JJ, Zhang XW, Wang L (2010) Photoisomerization of norbornadiene to quadricyclane using transition metal doped TiO2. Ind Eng Chem Res 49:8526–8531
Dholam R, Patel N, Santini A, Miotello A (2010) Efficient indium tin oxide/Cr-doped-TiO2 multilayer thin films for H2 production by photocatalytic water-splitting. Int J Hydrogen Energy 35:9581–9590
Fan XX, Chen XY, Zhu SP (2008) The structural, physical and photocatalytic properties of the mesoporous Cr-doped TiO2. J Mol Catal A Chemical 284:155–160
Zhu JF, Deng ZG, Chen F (2006) Hydrothermal doping method for preparation of Cr3+-TiO2 photocatalysts with concentration gradient distribution of Cr3+. Appl Catal B Environ 62:329–335
Mishra T, Wang L, Hahn R, Schmuki P (2014) In-situ Cr doped anodized TiO2 nanotubes with increased photocurrent response. Electrochim Acta 132:410–415
Hosseini MG, Momeni MM, Faraji M (2011) Fabrication of Au-nanoparticle/TiO2 nanotubes electrodes using electrochemical methods and their application for electrocatalytic oxidation of hydroquinone. Electroanalysis 7:1654–1662
Sarma B, Ray RS, Misra M (2015) Charge storage in flower-like ZnS electrochemically deposited on TiO2 nanotube. Mater Lett 139:77–80
Zhong JS, Wang QY, Yu YF (2015) Solvothermal preparation of Ag nanoparticles sensitized TiO2 nanotube arrays with enhanced photoelectrochemical performance. J Alloy Compd 620:168–171
Hosseini MG, Momeni MM (2012) Platinum nanoparticle-decorated TiO2 nanotube arrays as new highly active and non-poisoning catalyst for photoelectrochemical oxidation of galactose. Appl Catal A 427:35–42
Zhang Q, Bao N, Zhu X, Ma D, Xin Y (2015) Preparation and photocatalytic properties of graphene/TiO2 nanotube arrays photoelectrodes. J Alloy Compd 618:761–767
Wu L, Li F, Xu Y, Zhang JW, Zhang D, Li G, Li H (2015) Plasmon-induced photoelectrocatalytic activity of Au nanoparticles enhanced TiO2 nanotube arrays electrodes for environmental remediation. Appl Catal B Environ 164:217–224
Momeni MM, Ghayeb Y, Mohammadi F (2015) Solar water splitting for hydrogen production with Fe2O3 nanotubes prepared by anodizing method: effect of anodizing time on performance of Fe2O3 nanotube arrays. J Mater Sci Mater Electron 26:685–692
Acknowledgments
The author would like to acknowledge the financial support of the Iranian Nanotechnology Society and Isfahan University of Technology (IUT) Research Council.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Momeni, M.M., Ghayeb, Y. Fabrication, characterization and photoelectrochemical performance of chromium-sensitized titania nanotubes as efficient photoanodes for solar water splitting. J Solid State Electrochem 20, 683–689 (2016). https://doi.org/10.1007/s10008-015-3093-3
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10008-015-3093-3