Abstract
To investigate the electrochemical reaction mechanism of As, which shows poor electrochemical reversibility with Li, an As/C nanocomposite was prepared using a straightforward high-energy mechanical milling technique. The electrochemical reaction mechanism of the As/C nanocomposite electrode with Li was elucidated by ex situ XRD and HRTEM analyses in combination with differential capacity plot analysis. Electrochemical tests showed that the As/C nanocomposite exhibited good reversibility between the LiAs (0.85 V) and As (2 V) phases showing quasi-intercalation reaction.
Similar content being viewed by others
References
Nazri GA, Pistoia G (2004) Lithium batteries: science and technology. Kluwer Academic/Plenum, Boston
Park CM, Kim JH, Kim H, Sohn HJ (2010) Li-alloy based anode materials for Li secondary batteries. Chem Soc Rev 39:3115–3141
Winter M, Besenhard JO, Spahr M, Novak P (1998) Insertion electrode materials for rechargeable lithium batteries. Adv Mater 10:725–763
Larcher D, Beattie S, Morcrette M, Edstrom K, Jumas JC, Tarascon JM (2007) Recent findings and prospects in the field of pure metals as negative electrodes for Li-ion batteries. J Mater Chem 17:3579–3772
Huggins RA (1999) Lithium alloy negative electrodes. J Power Sources 81:13–19
Courtney IA, Dahn JR (1997) Key factors controlling the reversibility of the reaction of lithium with SnO2 and Sn2BPO6 Glass. J Electrochem Soc 144:2943–2948
Marom R, Amalraj SF, Leifer N, Jacob D, Aurbach D (2011) A review of advanced and practical lithium battery materials. J Mater Chem 21:9938–9954
McDowell MT, Lee SW, Nix WD, Cui Y (2013) Understanding the lithiation of silicon and other alloying anodes for lithium-ion batteries. Adv Mater 25:4966–4985
Cabana J, Monconduit L, Larcher D, Palacin MR (2010) Beyond intercalation-based Li-ion batteries: the state of the art and challenges of electrode materials reacting through conversion reactions. Adv Mater 22:E170–E192
Etacheri V, Marom R, Elazari R, Salitra G, Aurbach D (2011) Challenges in the development of advanced Li-ion batteries: a review. Energy Environ Sci 4:3243–3262
Souza DCS, Pralong V, Jacobson AJ, Nazar LF (2002) A reversible solid-state crystalline transformation in a metal phosphide induced by redox chemistry. Science 296:2012–2015
Park CM, Sohn HJ (2007) Black phosphorus and its composite for lithium rechargeable batteries. Adv Mater 19:2465–2468
Arico AS, Bruce P, Scrosati B, Tarascon JM, Schalkwijk WVN (2005) Nanostructured materials for advanced energy conversion and storage devices. Nat Mater 4:366–377
Bruce P, Scrosati B, Tarascon JM (2008) Nanomaterials for techargeable lithium batteries. Angew Chem Int Ed 47:2930–2946
Poizot P, Laruelle S, Grugeon S, Dupont L, Tarascon JM (2000) Nano-sized transition-metal oxides as negative-electrode materials for lithium-ion batteries. Nature 407:496–499
Larcher D, Mudalige C, George AE, Porter V, Gharghouri M, Dahn JR (1999) Si-containing disordered carbons prepared by pyrolysis of pitch/polysilane blends: effect of oxygen and sulfur. Solid State Ionics 122:71–83
Park CM, Sohn HJ (2008) Novel antimony/aluminum/carbon nanocomposite for high-performance rechargeable lithium batteries. Chem Mater 20:3169–3173
Park CM, Yoon S, Lee SI, Kim JH, Jung JH, Sohn HJ (2007) High-rate capability and enhanced cyclability of antimony-based composites for lithium rechargeable batteries. J Electrochem Soc 154:A917–A920
Park MG, Lee CK, Park CM (2014) Amorphized ZnSb-based composite anodes for high-performance Liion batteries. RSC Adv 4:5830–5833
Park CM, Yoon S, Lee SI, Sohn HJ (2009) Enhanced electrochemical properties of nanostructured bismuth-based composites for rechargeable lithium batteries. J Power Sources 186:206–210
Jung HC, Park CM, Sohn HJ (2011) Bismuth sulfide and its carbon nanocomposite for rechargeable lithium-ion batteries. Electrochim Acta 56:2135–2139
Kwon HT, Kim JH, Jeon KJ, Park CM (2014) CoxP compounds: electrochemical conversion/partial recombination reaction and partially disproportionated nanocomposite for Li-ion battery anodes. RSC Adv 4:43227–43234
Cromer DT (1959) The crystal structure of LiAs. Acta Crystallogr 12:36–41
Doublet ML, Lemoigno F, Gillot F, Monconduit L (2002) The LixVPn4 ternary phases (Pn = P, As): rigid networks for lithium intercalation/deintercalation. Chem Mater 14:4126–4133
Gillot F, Bichat MP, Favier F, Morcrette M, Doublet ML, Monconduit L (2004) The LixMPn4 phases (M/Pn = Ti/P, V/As): new negative electrode materials for lithium ion rechargeable batteries. Electrochim Acta 49:2325–2332
Scrosati B, Pietro BD, Lazzari M (1978) Silver arsenate as the cathodic material in lithium batteries. J Applied Electrochem 8:369–371
Chen J, Zhao H, Chen N, Wang X, Wang J, Zhang R, Jin C (2012) A novel FeAs anode material for lithium ion battery. J Power Sources 200:98–101
Suryanarayana C (2001) Mechanical alloying and milling. Prog Mater Sci 46:1–184
Nazri GA, Julien C, Mari HS (1994) Structure of Li3X (X = N, P, As) superionic conductors: X-ray diffraction and FTIR studies. Solid state. Ionics 70(71):137–143
Acknowledgments
This paper was supported by Research Fund, Kumoh National Institute of Technology.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Park, CM. Electrochemical lithium quasi-intercalation with arsenic. J Solid State Electrochem 20, 517–523 (2016). https://doi.org/10.1007/s10008-015-3068-4
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10008-015-3068-4