Summary
Polymer/clay nanocomposites consisting of an epoxy matrix reinforced by silicate clay plates have been observed to exhibit enhanced mechanical properties at low volume fraction of clay. The matrix and embedded nanoelements are modeled in the framework of continuum mechanics with known mechanical properties previously evaluated by, e.g., molecular dynamic simulation. Nanoclay composite is modeled by the aligned, uniformly distributed in the matrix stacks of parallel clay sheets separated from one another by interlayer matrix galleries of nanometer scale. Interaction of a finite number of oblate spheroidal inclusions modeling an individual stack inside the infinite matrix is carried by the multipole expansion technique. The obtained accurate numerical solution was incorporated into the multiparticle effective field method [5] for the estimation of effective thermoelastic properties. Detailed parametric analyses demonstrate the influence on the effective elastic moduli and stress concentrator factors of such key factors as the shape of nanoelements, interlayer distance, and the number of nanoelements in the stacks of deterministic structure.
Similar content being viewed by others
References
Christensen R. M. (1979). Mechanics of composite materials. Wiley Interscience, New York
Willis J. R. (1981). Variational and related methods for the overall properties of composites. Adv. Appl. Mech. 21: 1–78
Mura T. (1987). Micromechanics of defects in solids. Martinus Nijhoff, Dordrecht
Nemat-Nasser S. and Hori M. (1993). Micromechanics: Overall properties of heterogeneous materials. Elsevier, North-Holland
Buryachenko V. A. (2001). Multiparticle effective field and related methods in micromechanics of composite materials. Appl. Mech. Rev. 54: 1–47
Torquato, S.: Random heterogeneous materials: Microstructure and macroscopic properties. Springer 2002.
Milton, G. W.: The theory of composites. Appl. Comput. Math. vol. 6. Cambridge University Press 2002.
Kröner E. (1958). Berechnung der elastischen Konstanten des Vielkristalls aus den Konstanstanten des Einkristalls. Z. Physik. 151: 504–518
Mori T. and Tanaka K. (1973). Average stress in matrix and average elastic energy of materials with misfitting inclusions. Acta Metall. 21: 571–574
Benveniste Y. (1987). A new approach to application of Mori-Tanaka's theory in composite materials. Mech. Mater. 6: 147–157
Lax M. (1952). Multiple scattering of waves II. The effective fields of dense systems. Phys. Rev. 85: 621–629
Luo J.-J. and Daniel I. M. (2003). Characterization and modeling of mechanical behavior of polymer/clay nanocomposites. Compos. Sci. Tech. 63: 1607–1616
Wang J. and Pyrz R. (2004). Prediction of the overall moduli of layered silicate-reinforced nanocomposites-Part I: basic theory and formulas. Compos. Sci. Tech. 64: 925–934
Wang J. and Pyrz R. (2004). Prediction of the overall moduli of layered silicate-reinforced nanocomposites-Part II: analysis. Compos. Sci. Tech. 64: 935–944
Sheng N., Boyce M. C., Parksa D. M., Rutledgeb G. C., Abesb J. I. and Cohenb R. E. (2004). Multiscale micromechanical modeling of polymer/clay nanocomposites and the effective clay particle. Polymer 45: 487–506
Buryachenko V. A., Roy A., Lafdi K., Anderson K. L. and Chellapilla S. (2005). Multi-scale mechanics of nanocomposites including interface: experimental and numerical investigation. Compos. Sci. Technol. 65: 2435–2465
Hui C. Y. and Shia D. (1998). Simple formulas for the effective moduli of unidirectional aligned composites. Polym. Engng. Sci. 38: 774–782
Halpin J. C. and Kardos J. L. (1976). The Halpin-Tsai equations: a review. Polym. Engng. Sci. 16: 344–352
Brune D. A. and Bicerano J. (2002). Micromechanics of nanocomposites: comparison of tensile and compressive elastic moduli and prediction of effects of incomplete exfoliation and imperfect alignment on modulus. Polymer 43: 369–387
Ji X. L., Jing J. K., Jiang W. and Jiang B. Z. (2002). Tensile modulus of polymer nanocomposites. Polym. Engng. Sci. 42: 983–993
Vaia R. A. and Giannelis E. P. (2001). Polymer nanocomposites: status and opportunities. MRS Bulletin 26(5): 394–401
Kushch V. I. (1996). Elastic equilibrium of a medium containing finite number of aligned spheroidal inclusions. Int. J. Solids Struct. 33: 1175–1189
Kushch V. I. (1997). Microstresses and effective elastic moduli of a solid reinforced by periodically distributed spheroidal inclusions. Int. J. Solids Struct. 34: 1353–1366
Kushch V. I. (1998). Elastic equilibrium of a medium containing a finite number of arbitrarily oriented spheroidal inclusions. Int. J. Solids Struct. 35: 1187–1198
Kushch, V. I.: The stress state and effective thermoelastic properties of piece-homogeneous solids with spheroidal interfaces. Dr. Sci. thesis, Institute of Mechanics of the National Academy of Sciences, Kiev, Ukraine (1998).
Thostenson E. T., Ren Z.F. and Chou T.-W. (2001). Compos. Sci. Tech. 61: 1899–1912
Qian D., Wagner G. J., Liu W. K., Yu M.-F. and Ruoff R. S. (2002). Mechanics of carbon nanotubes. Appl. Mech. Rev. 55: 495–533
Zhang P., Huang Y., Philippe H. G. and Hwang K. (2002). On the continuum modeling of carbon nanotubes. Acta Mech. Sinica 18: 528–536
Gates T. S., Odegard G. M., Frankland S. J. V. and Clancy T. C. (2005). Computational materials: Multi-scale modeling and simulation of nanostructured materials. Compos. Sci. Technol. 65: 2416–2434
Willis J. R. (1983). The overall elastic response of composite materials. ASME J. Appl. Mech. 50: 1202–1209
Eshelby J. D. (1957). The determination of the elastic field of an ellipsoidal inclusion and related problems. Proc. Royal Soc. Lond. A 241: 376–396
Buryachenko V. A. and Tandon G. P. (2004). Estimation of effective elastic properties of random structure composites for arbitrary inclusion shape and anisotropy of components using finite element analysis. Int. J. Multiscale Comput. Engng. 2: 29–45
Bornet M., Stolz C. and Zaoui A. (1996). Morphologically representative pattern-based bounding in elasticity. J. Mech. Phys. Solids 44: 307–331
Levin, V. M.: Thermal expansion coefficient of heterogeneous materials. Izv. AN SSSR, Mekh. Tverd. Tela (2), 88–94 (In Russian; Engl. transl. Mech. Solids 2, 58–61) (1967).
Rosen B. W. and Hashin Z. (1970). Effective thermal expansion coefficient and specific heats of composite materials. Int. J. Engng. Sci. 8: 157–173
Hobson E. W. (1931). The theory of spherical and ellipsoidal harmonics. Cambridge University Press, Massachusetts
Kushch V. I., Sangani A. S., Spelt P. D. M. and Koch D. L. (2002). Finite Weber number motion of bubbles through a nearly inviscid liquid. J. Fluid Mech. 460: 241–280
Abramovitz M. and Stegun I. A. (1964). Handbook of mathematical functions. Dover, New York
Bateman G. and Erdelyi A. (1953). Higher transcendental functions 2. McGraw Hill, New York
Tandon, G. P., Kim, R. Y., Rice, B. P.: Influence of vapor-grown carbon nanocomposites on thermomechanical properties of graphite-epoxy composites. Paper 2039 Proc. American Society for Composites 17th Technical Conference, Purdue University, West Lafayette, Indiana (2002).
Buryachenko V. A. and Roy A. (2005). Effective thermoelastic moduli and stress concentrator factors of nanocomposites. Acta Mech. 177: 149–169
Shia D., Hui C. Y., Burnside S. D. and Giannelis E. P. (1998). An interface model for the prediction of Young’s modulus of layered silicate-elastomer nanocomposites. Polym. Composite 19: 608–617
Kornmann X., Thomann R., Mülhaupt R., Finter J. and Berglund L. (2002). Synthesis of amine-curried, epoxy-layered silicate nanocomposites: the influence of the silicate surface modification on the properties. J. Appl. Polym. Sci. 86: 2643–2652
Lipatov, Y. S.: Polymer reinforcement. ChemTec Publishing 1995.
Lu J. P. (1997). Elastic properties of carbon nanotube and nanoropes. Phys. Rev. Lett. 79: 1297–1300
Salvetat J.-P., Briggs G. A., Bonard J.-M., Bacsa R. R. and Kulik A. J. (1999). Elastic and shear moduli of single-walled carbon nanotube ropes. Phys. Rev. Lett. 82: 944–947
Norris A. N., Callegari A. J. and Sheng P. A. (1985). A generalized differential effective medium theory. J. Mech. Phys. Solids s33: 525–543
Buryachenko, V. A., Parton, V. Z.: Multi–particle differential methods in the statics of composites. Priklad. Mekh. Tekhn. Fiz. (3), 148–156 (In Russian; Engl. transl.: J. Appl. Mech. Tech. Phys. 33, 455–464) (1992).
Ponte Castañeda P. and Willis J. R. (1995). The effect of spatial distribution on the effective behavior of composite materials and cracked media. J. Mech. Phys. Solids 43: 1919–1951
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Buryachenko, V.A., Kushch, V.I. & Roy, A. Effective thermoelastic properties of random structure composites reinforced by the clusters of deterministic structure (application to clay nanocomposites). Acta Mechanica 192, 135–167 (2007). https://doi.org/10.1007/s00707-006-0421-9
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00707-006-0421-9