A numerical modelling study of coastal flooding

Summary

A coastal ocean model capable of modelling tides, storm surge and the overland flow of floodwaters has been further developed to include the flux of water from tributaries and the forcing from wave breaking that leads to wave setup in the nearshore zone. The model is set up over the Gold Coast Broadwater on the east coast of Australia. This complex region features a coastal lagoon into which five tributaries flow and is subject to flooding from extreme oceanic conditions such as storm surge and wave setup as well as terrestrial runoff. Weather conditions responsible for storm surge, waves and flooding include cyclones of both tropical and mid-latitude origin.

Two events are modelled. The first is an east coast low event that occurred in April 1989. This event verified well against available observations and analysis of the model simulations revealed that wave setup produced a greater contribution to the elevated water levels than the storm surge. The second case to be modelled was tropical cyclone Wanda, responsible for the 1974 floods. Modelled water levels in the Broadwater were reasonably well captured. Sensitivity experiments showed that storm surge and wave setup were only minor contributors to the elevated sea levels and their contribution was confined to the earlier stage of the event before the runoff reached its peak. The contribution due solely to runoff exhibited a tidal-like oscillation that was 180° out-of-phase with the tide and this was attributed to the greater hydraulic resistance that occurs at high tide. A simulation of this event with present day bathymetry at the Seaway produced sea levels that were 0.3–0.4 m lower than the simulation with 1974 bathymetry highlighting the effectiveness of deepened Seaway channel to reduce the impact of severe runoff events in the Broadwater.