Abstract
In this paper, the authors report on a series of laboratory and numerical modelling experiments aiming to quantify the behaviour of intact veined rock. Five controlled triaxial compression experiments were conducted on intact veined specimens of mafic intrusive complex andesite (CMET) from the El Teniente mine. The experiments demonstrated that veins controlled the fracturing and resulting peak strengths of the specimens. High-quality experimental data made possible the development of numerical experiments using a 3D Particle Flow Code and the synthetic rock mass (SRM) methodology. The numerical experiments demonstrated that the SRM approach could be successful for modelling the behaviour of veined rock. Greater value was gained by coupling the results of high-quality laboratory tests to comprehensive numerical models.
Similar content being viewed by others
References
Best MG (2003) Igneous and metamorphic petrology, 2nd edn. Blackwell Science Ltd, Malden
Brzovic A (2010) Characterization of primary copper ore for block caving at the El Teniente Mine, Chile. (Ph.D., Western Australia School of Mines)
Brzovic A, Villaescusa E (2007) Rock mass characterization and assessment of block-forming geological discontinuities during caving of primary copper ore at the El Teniente Mine, Chile. Int J Rock Mech Min Sci 44(4):565–583
Cho N, Martin CD, Sego DC (2007) A clumped particle model for rock. Int J Rock Mech Min Sci 44(7):997–1010
Dunlop R, Belmonte A (2005) The April 22nd, 2003 rockburst in the sub 6 sector, El Teniente Mine—a case history. In: 6th International Symposium on Rockburst and Seismicity in Mines (RaSiM6), Perth, Australia
Eberhardt E, Stimpson B, Stead D (1999) The influence of mineralogy on the initiation of microfractures in granite. In: Proceedings of the 9th Congress of the International Society for Rock Mechanics, Paris. p 1007–1010
Goodfellow SD, Nasseri MHB, Young RP, Flynn JW, Reyes Montes JM (2013) Analysis of continuous acoustic emission waveform records from rock fracturing experiments. In: Proceedings of the 47th US Rock Mechanics/Geomechanics Symposium, San Francisco, California, USA
ISRM (1983) Suggested methods for determining the strength of rock materials in triaxial compression: revised version. Int J Rock Mech Min Sciences Geomech Abstr 20(6):285–290
Itasca (2008a) PFC fishtank. PFC3D version 4.0: FISH in PFC3D, 4th edn. Itasca Consulting Group Inc, Minneapolis, pp 3/1–3/88
Itasca (2008b) PFC3D version 4: theory and background, 4th edn. Itasca Consulting Group Inc, Minneapolis
Itasca (2008c) PFC3D version 4: user’s guide, 4th edn. Itasca Consulting Group Inc, Minneapolis
Laubscher DH, Jakubec J (2001) The MRMR rock mass classification for jointed rock masses. In: Hustrulid WA, Bullock RL (eds) Underground mining methods: engineering fundamentals and international case studies, Chap 57. SME, pp 475–481
Mas Ivars D, Pierce M, Darcel C, Reyes-Montes J, Potyondy DO, Young RP, Cundall PA (2011) The synthetic rock mass approach for jointed rock mass modelling. Int J Rock Mech Min Sci 48(2):219–244
Potyondy DO, Cundall PA (2004) A bonded-particle model for rock. Int J Rock Mech Min Sci 41(8):1329–1364
Turichshev A, Hadjigeorgiou J, Brzovic A, Reyes-Montes J, Nasseri MHB (2012) Behaviour of veined rock under triaxial compression. MassMin 2012, Sudbury
Wawersik WR, Fairhurst C (1970) A study of brittle rock fracture in laboratory compression experiments. Int J Rock Mech Min Sci Geomech Abstr 7(5):561–575
Acknowledgments
The authors would like to acknowledge the MMT2 project for sponsoring this research. Technical inputs of Drs. Andreas Brzovic (Codelco), Matthew Pierce (Itasca), Juan Reyes-Montes (ASC), Farzine Nasseri (University of Toronto), and manuscript reviewers are greatly appreciated.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Turichshev, A., Hadjigeorgiou, J. Experimental and Numerical Investigations into the Strength of Intact Veined Rock. Rock Mech Rock Eng 48, 1897–1912 (2015). https://doi.org/10.1007/s00603-014-0690-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00603-014-0690-x