Abbreviations
- E :
-
Elastic modulus (ML−1T−2)
- E 0 :
-
Deformation modulus (ML−1T−2)
- v 1 :
-
Speed of unloading axial stress (LT−1)
- v 3 :
-
Speed of unloading lateral stress (LT−1)
- R2 :
-
Coefficient of determination
- t :
-
Time (T)
- u 1 :
-
Axial displacement (L)
- ε 1 :
-
Axial strain
- σ 1 :
-
Axial stress (ML−1T−2)
- σ 3 :
-
Lateral stress (ML−1T−2)
- σ 03 :
-
Initial lateral stress (ML−1T−2)
- ν :
-
Poisson’s ratio
References
Lakes RS (1987) Foam structures with a negative Poisson’s ratio. Science 235(4792):1038–1040. doi:10.1126/science.235.4792.1038
Lau JSO, Chandler NA (2004) Innovative laboratory testing. Int J Rock Mech Min Sci 41(8):1427–1445. doi:10.1016/j.ijrmms.2004.09.008
Shan G, Yang W, Feng J et al (2006) Advances in test methods for Poisson’s ratio of materials. Mater Rev 20(3):15–20 (in Chinese)
Tang D, Zhen J, Hu Y et al (2001) Discussion on testing and interpretation for Poisson’s ratio. Chin J Rock Mech Eng 20(Supp.):1772–1775 (in Chinese)
You M (2007) Mechanical properties of rocks. Geological Publishing House, Beijing (in Chinese)
Zhou X, Zhang Y (2007) Constitutive model for rock masses under unloading and its application. Science Press, Beijing (in Chinese)
Acknowledgments
This research was financially supported by the National Natural Science Foundation of China (Grant No. 41302245) and the Education Department of Sichuan Province (Grant No. 12ZB010).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Xu, X., Huang, R., Li, H. et al. Determination of Poisson’s Ratio of Rock Material by Changing Axial Stress and Unloading Lateral Stress Test. Rock Mech Rock Eng 48, 853–857 (2015). https://doi.org/10.1007/s00603-014-0586-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00603-014-0586-9