References
AFNOR (2000) Détermination du pouvoir abrasif d’une roche—Partie 1: Essai de rayure avec une pointe (NF P 94-430-1), Paris
ASTM (2010) Standard test method for laboratory determination of abrasiveness of rock using the CERCHAR method. Designation: D7625-10
Cerchar—Centre d’Études et des Recherches des Charbonnages de France (1986) The Cerchar abrasivity index. Verneuil
Jacobs N, Hagan P (2009) The effect of stylus hardness and some test parameters on the Cerchar Abrasivity Index. In: Proceedings of 43rd US rock mechanics symposium, June 28–July 1, Asheville, NC, USA
Käsling H, Thuro K (2010) Determining rock abrasivity in the laboratory. In: Zhao, Labiouse, Dudt, Mathier (eds) Rock mechanics in civil and environmental engineering—Proc EUROCK 2010. Taylor & Francis, London, pp 425–428
Michalakopoulos TN, Anagnostou VG, Bassanou ME, Panagiotou GN (2006) The influence of steel styli hardness on Cerchar abrasiveness index value. Int J Rock Mech Min Sci 43:321–327
Plinninger R, Käsling H, Thuro K, Spaun G (2003) Testing conditions and geomechanical properties influencing the Cerchar abrasiveness index (CAI) value. Int J Rock Mech Min Sci 40:259–263
Rostami J, Özdemir L, Bruland A, Dahl F (2005) Review of issues related to Cerchar abrasivity testing and their implications on geotechnical investigations and cutter cost estimates. In: Rapid Excavation and Tunnelling Conference, Seattle, WA, USA. pp 15–29
Valantin A (1973) Examen des différents procédés classiques de détermination de la nocivité des roches vis-à-vis de l’abattage mécanique. Expose Presenté Aux Journées d’information Techniques de Creusement, les 28–29 Novembre 1973, Luxemburg, pp 133–140
West G (1989) Rock abrasiveness testing for tunnelling. Int J Rock Mech Min Sci 26:151–160
Acknowledgments
A 3-day workshop of the WG members at Bülent Ecevit University, Zonguldak, Turkey was made possible by financial support of the Bülent Ecevit University, Zonguldak, Turkey and TUBITAK (The Scientific and Technological Research Council of Turkey) Grant No. 110M579. Input from H. Copur (Technical University Istanbul, Turkey) is gratefully acknowledged. We acknowledge the useful and constructive comments of the reviewers Prof. Bilgin (Istanbul Technical Univerity, Turkey), Prof. Nilsen (NTNU Trondheim, Norway), Prof. Thuro (Technical University Munich, Germany), Dr. Plinninger (Dr. Plinninger Geotechnik, Bernried, Germany) and Prof. Rostami (Pennsylvania State University, USA).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Alber, M., Yaralı, O., Dahl, F. et al. ISRM Suggested Method for Determining the Abrasivity of Rock by the CERCHAR Abrasivity Test. Rock Mech Rock Eng 47, 261–266 (2014). https://doi.org/10.1007/s00603-013-0518-0
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00603-013-0518-0