References
Akcin NA, Muftuoglu YV, Bas N (1994) Prediction of drilling performance for electro-hydraulic percussive drills. In: Pasamehmetoglu et al. (eds) Proceedings of the Third international symposium on mine planning and equipment selection. Balkema, İstanbul-Turkey, pp 483–488
Akün ME, Karpuz C (2005) Drillability studies of surface-set diamond drilling in Zonguldak region sandstones from Turkey. Int J Rock Mech Min Sci 42:473–479
Aleman VP (1981) A strata strength index for boom type roadheaders. Tunn Tunn 13:52–55
Altindag R (2000) The role of rock brittleness on the analysis of percussive drilling performance (in Turkish), In: Proceedings the Fifth Turkish national rock mechanics symposium, Isparta, Türkiye, 105-112
Altindag R (2002) The evaluation of rock brittleness concept on rotary blast hole drills. J S Afr Inst Min Metall 102:61–66
Altindag R (2003) Correlation of specific energy with rock brittleness concepts on rock cutting. J S Afr Inst Min Metall 103:163–171
Altindag R (2008) Relationships between brittleness and specific energy in excavation mechanics. In: Proceedings of 9th regional rock mechanics symposium. İzmir, Turkey, pp 437–451
Andreev GE (1995) Brittle failure of rock materials: test results and constitutive models. A. A. Balkema/Rotterdam, p 446
Aubertin M, Gill DE (1988) Une methodologie d’evaluation du potential de coups de terrain dans les mines d’Abitibi. In: Proceedings of Colloque sur le Controle de Terrain (AMMQ), Val d’Or, pp 47–77
Aubertin M, Gill DE, Simon R (1994) On the use of the brittleness index modified (BIM) to estimate the post-peak behaviour of rocks, rock mechanics. In: Nelson and Laubach (eds). Balkema, pp 945–952
Baron LI (1962) Determination of properties of rocks (in Russian), Gozgotekhizdat. Moscow
Bilgin N, Eskikaya Ş, Dinçer T (1993) The performance analysis of large diameter blast hole rotary drills in Turkish Coal Enterprises. In: Almgren T, Kumar T, Vagenas T (eds), The 2nd International symposium on mine mechanics automation, Lulea, pp 129–135
Bilgin N, Yazıcı S, Eskikaya S (1996) A model to predict the performance of roadheaders and impact hammers in tunnel drivages. In: Barla M (ed), Prediction and performance in rock mechanics and Rock Engineering, Torino, 2, pp 715–720
Clark GB (1979) Principles of rock drilling. Colorado School of Mines Quart, Colorado 74:91–93
Coates DF, Parsons RC (1966) Experimental criteria for classification of rock substances. Int J Rock Mech Min Sci 3(3):181–189
Evans I, Pomeroy CD (1966) The strength fracture and workability of coal. Pergamon Press, Oxford
Fowell RJ, McFeat-Smith I (1976) Factors influencing the cutting performance of a selective tunnelling machine. Tunnelling ‘76, Institution of Mining and Metallurgy, London, pp 3–11
Glossary of geology and related sciences (1960) American Geology Institute, Washington, DC
Goktan RM (1991) Brittleness and micro-scale rock cutting efficiency. Min Sci Technol 13:237–241
Goktan RM, Yilmaz NG (2005) A new methodology for the analysis of the relationship between rock brittleness index and drag pick cutting efficiency. J S Afr Inst Min Metall 105:727–733
Gunaydin O, Kahraman S, Fener M (2004) Sawability prediction of carbonate rocks from brittleness indexes. J S Afr Inst Min Metall 104:1–6
Hajiabdolmajid V, Kaiser P (2003) Brittleness of rock and stability assessment in hard rock tunnelling. Tunnell Undergr Space Technol 18:35–48
Hetenyi M (1966) Handbook of experimental stress analysis. Wiley, New York, p 15
Howarth DF (1987) The effect of pre-existing microcavities on mechanical rock performance in sedimentary and crystalline rocks. Int J Rock Mech Min Sci Geomech Abstr 24:223–233
Howarth DF, Adamson WR, Berndt JR (1986) Correlation of model tunnel boring and drilling machine performances with rock properties. Int J Rock Mech Min Sci 23:171–175 [Technical Note]
Huang SL, Wang ZW (1997) The mechanics of diamond core drilling of rocks. Int J Rock Mech Min Sci Geomech Abstr 34:612
Hucka V, Das B (1974) Brittleness determination of rocks by different methods. Int J rock Mech Min Sci Geomech Abstr 11:389–392
Kahraman S (1999) Rotary and percussive drilling prediction using regression analysis. Int J Rock Mech Min Sci 36:981–989 [Technical Note]
Kahraman S (2002) Correlation of TBM and drilling machine performance with rock brittleness. Eng Geol 65:269–283
Kahraman S, Altindag R (2004) A brittleness index to estimate fracture toughness. Int J Rock Mech Min Sci 41:343–348
Kahraman S, Gunaydin O, Fener M, Bilgil A (2003a) Correlation between Los Angeles abrasion loss and uniaxial compressive strength. In: Proceedings of International symposium on industrial minerals and building stones. İstanbul, Türkiye, pp 577–581
Kahraman S, Bilgin N, Feridunoğlu C (2003b) Dominant rock properties affecting the penetration rate of percussive drills. Int J Rock Mech Min Sci 40:711–723
Karpuz C, Pasamehmetoğlu AG, Dinçer T, Müftüoglu Y (1990) Drillability studies on the rotary blasthole drilling of lignite overburden series. Int J Surf Min Reclam 4:89–93
Kovscek PD, Taylor CD, Thimons ED (1988) Evaluation of water-jet-assisted drilling with handheld drills, U.S. Dept. of the interior, USBM RI-9174, p 15
Lawn BR, Marshall DB (1979) Hardness, toughness and brittleness: an indentation analysis. J Ceram Soc 62(78):347–350
McFeat-Smith I, Fowel RJ (1977) Correlation of rock properties and the cutting performance of tunnelling machines. In: Proceedings of a Conference on rock engineering. The University of Newcastle upon Tyne, pp 581–602
Mellor M (1972) Normalization of specific energy values, technical note. Int J Rock Mech Min Sci Geomech Abstr 9:661–663
Morley A (1954) Strength of materials, 11th edn. Longmans, Green, London, p 532
Nilsen B, Ozdemir L (1993) Hard rock tunnel boring prediction and field performance. In: Bowerman LD, Monsees JE (eds) Proceedings of the Rapid excavation and tunnelling conference, Boston, MA, pp 833–852
Obert L, Duvall WI (1967) Rock mechanics and the design of structures in rock. Wiley, New York, p 278
Paone J, Madson D (1966) Drillability studies—impregnated diamond bits. U.S. Dept. of the interior, Bureau of Mines RI 6776, p 16
Paone J, Madson D, Bruce WE (1969a) Drillability studies—laboratory percussive drilling. U.S. Dept. of the interior, Bureau of Mines RI 7300, p 22
Paone J, Bruce WE, Virciglio PR (1969b) Drillability studies—statistical regression analysis of diamond drilling. U.S. Dept. of the interior, Bureau of Mines RI 6880, p 29
Poole RW, Farmer IW (1978) Geotechnical factors affecting tunnelling machine performance in coal measures rocks. Tunn Tunn 10:27–30
Quinn JB, Quinn GD (1997) Indentation brittleness of ceramics: a fresh approach. J mater sci 32:4331–4346
Ramsey JG (1967) Folding and fracturing of rocks. McGraw-Hill, London, p 289
Ribacchi R (2000) Mechanical tests on pervasively jointed rock material: insight into rock mass behaviour. Rock Mech Rock Eng 33(4):243–266
Schmidt RL (1972) Drillability studies—percussive drilling in the field. U.S. Dept. of the interior, Bureau of Mines RI-7684, p 31
Selim AA, Bruce WE (1970) Prediction of penetration rate for percussive drilling, US Bureau of Mines RI 7396
Singh SP (1986) Brittleness and the mechanical winning of coal. J Min Sci Technol 3:173–180
Singh SP (1987) Criterion for the assessment of the cuttability of coal. In: Szwilski AB, Richards MJ (eds) Underground mining methods and technology. Elsevier, Amsterdam, pp 225–239
Singh TN, Gupta AR, Sain R (2006) A comparative analysis of cognitive systems for the prediction of drillability of rocks and wear factor. Geotech Geol Eng 24:299–312
Tanaino AS (2005) Rock classification by drillability Part I: analysis of the available classifications. J Min Sci 41(6):541–549
Yarali O (2007) Investigation of the relations between rock brittleness and drilling rate index. In: Proceedings of the 20th international mining congress of turkey, pp 217-224
Yilmaz NG, Karaca Z, Goktan RM, Akal C (2008) Relative brittleness characterization of some selected granitic building stones: influence of mineral grain size. Constr Build Mater 23(1):370–375
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Altindag, R. Assessment of some brittleness indexes in rock-drilling efficiency. Rock Mech Rock Eng 43, 361–370 (2010). https://doi.org/10.1007/s00603-009-0057-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00603-009-0057-x