Skip to main content
SpringerLink
Log in

On the Measurement of the Tensile Strength of Soft Rocks

  • Published:
Rock Mechanics and Rock Engineering Aims and scope Submit manuscript

Summary.

This paper reports on a comparative study of various types of experimental tests for measuring the tensile strength of rocks and rock-like materials. A critical assessment is presented of some widely used laboratory techniques on the basis of experimental data from the literature and from the laboratory investigation performed in this study.

Tests were carried out using a triaxial apparatus recently set up at Milan University of Technology. This was designed to reduce random misalignments between specimen and loading frame, which are typical of conventional triaxial cells with external tie bars. The apparatus was then modified to perform various types of tests for determining the tensile strength of materials. An artificial building stone and a natural calcarenite of the Gravina di Puglia geological formation, sampled at Montescaglioso (Matera-Italy) were tested in this research. The experimental investigation included various types of tests, namely the uni-axial, the Brazilian, the ring, the three and four points bending and the Luong test. Specimens of both materials were also compressed to failure in unconfined conditions and loaded cyclically in unconfined tension and compression, Young’s moduli being measured by means of local instrumentation.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  • T. Apuani (1999) ArticleTitleSulla misura della resistenza a trazione in rocce anisotrope. Riv. Ital. Geotecn. 3 37–45

    Google Scholar 

  • G Barla N Innaurato (1973) ArticleTitleIndirect tensile testing of anisotropic rocks. Rock Mech. 5 215–230 Occurrence Handle10.1007/BF01301795

    Article  Google Scholar 

  • J. B. Burland M. Symes (1982) ArticleTitleA simple axial displacement gauge for use in the triaxial apparatus. Géotechnique 32 IssueID1 62–65

    Google Scholar 

  • C. Butenuth M. H. De Freitas D. Al-Samahiji H. D. Park J. W. Cosgrove K. Schetelig (1993) ArticleTitleObservations on the measurement of tensile strength using the Hoop test. Int. J. Rock Mech. Min. Sci. Geomech. Abstr. 30 IssueID2 157–162 Occurrence Handle10.1016/0148-9062(93)90708-L

    Article  Google Scholar 

  • G. Cardani A. Meda (2004) ArticleTitleMarble behaviour under monotonic and cyclic loading in tension. Constru. Build. Mater. 18 419–424 Occurrence Handle10.1016/j.conbuildmat.2004.03.012

    Article  Google Scholar 

  • Colback P. S. B. (1966): An analysis of brittle fracture initiation and propagation in the Brazilian test. Proc. 1st Congr. Int. Soc. Rock Mech., Lisbon, vol. 1, 385–391.

  • Cotecchia, V., Grassi, D. (1975): Stato di conservazione dei “Sassi” di Matera (Basilicata) in rapporto alle condizioni geomorfologiche e geomeccaniche del territorio e alle azioni antropiche. Geol. Appl. Idrogeol. 10.

  • De Freitas, M. H. (2004): Personal communication.

  • L. Dobereiner M. H. De Freitas (1986) ArticleTitleGeotechnical properties of weak sandstones. Géotechnique 36 IssueID1 79–94

    Google Scholar 

  • Fairhurst, C. (1961): Laboratory measurement of some physical properties of rock. Proc. 4th Symp. Rock Mech., Univ. Park, Pennsylvania, 105–118

  • C. Fairhust (1964) ArticleTitleOn the validity of the Brazilian test for brittle materials. Int. J. Rock Mech. Min. Sci. 1 535–546 Occurrence Handle10.1016/0148-9062(64)90060-9

    Article  Google Scholar 

  • Griffith, A. A. (1924): Proc. 1st Int. Congr. App. Mech., 55–63.

  • Hardy H. R., Jayaraman N. I. (1970): An investigation of methods for the determination of the tensile strength of rock. Proc. 2nd Congr. Int. Soc. Rock Mech., Belgrade, vol. 3, 85–92.

  • I. Hawkes M. Mellor (1970) ArticleTitleUniaxial testing in rock mechanics laboratories. Eng. Geol. 4 177–285 Occurrence Handle10.1016/0013-7952(70)90034-7

    Article  Google Scholar 

  • Hoek, E. (1964): Rock fracture around mining excavations. Proc. 4th Int. Conf. on Strata Control and Rock Mech., New York.

  • G. Hondros (1959) Aust. J. Appl. Sci. 10 IssueID3 243–268

    Google Scholar 

  • J. A. Hudson (1969) ArticleTitleTensile strength and the ring test. Int. J. Rock Mech. Min. Sci. 6 91–97 Occurrence Handle10.1016/0148-9062(69)90029-1

    Article  Google Scholar 

  • J. A. Hudson E. T. Brown F. Rummel (1972) ArticleTitleThe controlled failure of rock discs and rings loaded in diametral compression. Int. J. Rock Mech. Min. Sci. 9 241–248 Occurrence Handle10.1016/0148-9062(72)90025-3

    Article  Google Scholar 

  • ISRM Commission on Testing Methods (1978): Suggest methods for determining tensile strength of rock materials. Int. J. Rock Mech. Min. Sci. Geomech. Abstr. 15, 101–103.

  • J. C. Jaeger (1967) ArticleTitleFailure of rocks under tensile conditions. Int. J. Rock Mech. Min. Sci. 4 219–227 Occurrence Handle10.1016/0148-9062(67)90046-0

    Article  Google Scholar 

  • J. C. Jaeger E. R. Hoskins (1966) ArticleTitleRock failure under the confined Brazilian test. J. Geophys. Res. 71 2651–2659

    Google Scholar 

  • John, S. J., De Freitas, M. H., Cosgrove, J. W., Clarke, B. A., Loe N., Al-Samahiji D., Tang H. (1991): Stress analysis of a unidirectionally loaded hoop specimen. Proc. 7th Congr. Int. Soc. Rock Mech., Aachen, Germany, 513–518.

  • Lagioia, R. (1994): Comportamento meccanico dei terreni cementati naturali: indagine sperimentale ed interpretazioni teoriche. Tesi di Dottorato, Politecnico di Milano.

  • R. Lagioia R. Nova (1995) ArticleTitleAn experimental and theoretical study of the behaviour of a calcarenite in triaxial compression. Géotechnique 45 IssueID4 633–648

    Google Scholar 

  • M. P. Luong (1986) ArticleTitleUn nouvel essai pour la mesure de la résistance à la traction. Rev. Fr. Géotechn. 34 69–74

    Google Scholar 

  • Luong, M. P. (1988): Direct tensile and direct shear strengths of Fontainebleau sandstone. In: Cundall et al. (eds), Key questions in rock mechanics. Balkema, Rotterdam, 237–246.

  • Luong, M. P. (1989): Fracture behaviour of concrete and rock under mode II and mode III shear loading. In: Shah et al. (eds), Fracture of concrete and rock, recent developments. Elsevier, New York.

  • McClintock, F. A., Walsh, J. B. (1962): Friction on Griffith’s cracks in rock under pressure. Proc. 4th U.S. Nat. Congr. Appl. Mech., 1015–1021.

  • M. Mellor I. Hawkes (1971) ArticleTitleMeasurement of tensile strength by diametral compressions of discs and annuli. Eng. Geol. 5 173–225 Occurrence Handle10.1016/0013-7952(71)90001-9

    Article  Google Scholar 

  • Obert L., Windes S. L., Duvall W. I. (1946): Standardized tests for determining the physical properties of mine rock. RI-3891, Bureau of Mines, U.S. Dept. of the Interior.

  • F. Okubo K. Fukui (1996) ArticleTitleComplete stress-strain curves for various rock types in uniaxial tension. Int. J. Rock Mech. Min. Sci. Geomech. Abstr. 33 IssueID6 549–556 Occurrence Handle10.1016/0148-9062(96)00024-1

    Article  Google Scholar 

  • P. N. Sundaram J. M. Corrales (1980) ArticleTitleBrazilian tensile strength of rocks with different elastic properties in tension and compression. Int. J. Rock Mech. Min. Sci. Geomech. Abstr. 17 131–133 Occurrence Handle10.1016/0148-9062(80)90265-X

    Article  Google Scholar 

  • Xu, S., de Freitas M. H., Clarke B. A. (1988) The measurement of tensile strength or rock. Proc. of the ISRM Symp. Rock Mech. and Power Plants, Madrid, Spain, 125–132.

  • W. Weibull (1939) ArticleTitleA statistical theory of the strength of materials. Proc. Roy. Swed. Inst. Eng. 151 1–45

    Google Scholar 

  • G. Wijk (1978) ArticleTitleSome new theoretical aspects of indirect measurements of tensile strength of rocks. Int. J. Rock Mech. Min. Sci. Geomech. Abstr. 15 149–160 Occurrence Handle10.1016/0148-9062(78)91221-4

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Milan University of Technology, Milan, Italy

    A. Coviello, R. Lagioia & R. Nova

Authors
  1. A. Coviello
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. R. Lagioia
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. R. Nova
    View author publications

    You can also search for this author in PubMed Google Scholar

Rights and permissions

Reprints and permissions

About this article

Cite this article

Coviello, A., Lagioia, R. & Nova, R. On the Measurement of the Tensile Strength of Soft Rocks. Rock Mech. Rock Engng. 38, 251–273 (2005). https://doi.org/10.1007/s00603-005-0054-7

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00603-005-0054-7

Search

Navigation