Abstract
A new surface mount system with a parallel arrangement of miniature manipulators was proposed for use in system downsizing. The miniature manipulator consists of a molded pantograph mechanism, which is composed of large-deflective hinges and links. The purpose in this study is to investigate the static and dynamic characteristics of the pantograph mechanism. The static characteristic is clarified to analyze the nonlinear moment at the hinges and the displacement error of the output point. The dynamic characteristic deals with the forces at the input and the hinges, along with the dynamic displacement error of the output point when the miniature manipulator is driven at 20 Hz, and the output point is moved on a U-shape for picking and placing works. We consider forced vibrations corresponding to natural frequencies and mode shapes of the pantograph mechanism. These investigations apply the Finite Element Method (ANSYS) and Multi-Body-System approach (SIMPACK) and different levels of modeling are compared.
Similar content being viewed by others
References
Horie M, Ikegami K (1995) Development of pantograph mechanisms with super elastic hinges for micro-bonding by adhesives. In: Proceedings of the nineth World congress on the theory of machines and mechanisms in Milano, 30, August–2, September 1995, vol 4, pp 3096–3100
Horie M, Ishii Y, Kamiya D (2001) A dynamic analysis of a molding pantograph mechanism with large-deflective hinges and links. In: Proceeding of the third IFToMM international micromechanism symposium, Tokyo 10–11 September, pp 30–33
Horie M, Uchida T, Kamiya D (2002) A pantograph mechanism with large-deflective hinges for miniature surface mount systems. In: Proceeding of ROMANSY 13-theory and practice of robots and manipulators in Zakopane 2000, Springer-Verlag Vienna New York 2002, ISBN 3-211-83333-1, pp 93–102
Kota S (1999) Design of compliant mechanisms with applications to MEMS and smart structures. In: Proceedings of the tenth World congress on the theory of machines and mechanisms in Oulu, Finland, 20–24, June 1999, vol 7, pp 2722–2728
Müglitz J, Schönherr J (1999) Miniaturized mechanism-joint design, modeling, example. In: Proceedings of the tenth World congress on the theory of machines and mechanisms in Oulu, Finland, 20–24, June 1999, vol 2, pp 848–855
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Ishii, Y., Thümmel, T. & Horie, M. Dynamic characteristic of miniature molding pantograph mechanisms for surface mount systems. Microsyst Technol 11, 991–996 (2005). https://doi.org/10.1007/s00542-005-0525-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00542-005-0525-5