Zusammenfassung
Das Ziel dieser Masterarbeit war es, den aktuellen Stand des Zukunftsprojektes "Industrie 4.0" darzustellen und potentielle Effekte auf die Umformtechnik zu identifizieren. Die Auswirkungen von Industrie 4.0 auf die Umformtechnik werden sich in absehbarer Zukunft vor allem in der zunehmenden Vernetzung der Produktionsanlagen, intelligentem Energiemanagement und der Assistenz der Mitarbeiter bei der Fehlerbehebung und Instandhaltung äußern. Außerdem wurde eine Modelldrückmaschine für Aluminiumbleche mit einer LEGO Mindstorms EV3 Steuerung konstruiert, die junge technische Nachwuchskräfte motivieren und zentrale Aspekte von Industrie 4.0 demonstrieren soll.
Abstract
The aim of this master thesis was to investigate the current state of the future project "Industrie 4.0" and to identify potential effects on metal forming. The effects are expected especially in the increasing networking of the production facilities, intelligent energy management and employee support in troubleshooting and maintenance. In addition, a model machine for metal spinning of aluminium sheets with a LEGO Mindstorms EV3 control has been constructed to motivate young technical potentials and demonstrate key aspects of Industrie 4.0.
Literatur
Ganschar, G.; Gerlach, S.; Hämmerle, M.; Krause, T.; Schlund, S.: Produktionsarbeit der Zukunft-Industrie 4.0, In: Spath, D. (Hrsg.), Stuttgart: Fraunhofer Verlag, 2013
Wong, C. C.; Dean, T. A.; Lin, J.: A review of spinning, shear forming and flow forming processes, International Journal of Machine Tools & Manufacture, 43 (2003), pp 1419–1435
Runge, M.: Drücken und Drückwalzen, Landsberg/Lech: Verlag Moderne Industrie, 1993, (Bibliothek der Technik, 72)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Sattler, E. Vom Spielzeug zur Steuerung von Umformtechnologien – Walzdrücken im Kontext von Industrie 4.0. Berg Huettenmaenn Monatsh 159, 308–309 (2014). https://doi.org/10.1007/s00501-014-0259-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00501-014-0259-8
Schlüsselwörter
- Lego
- Mindstorms EV3
- Industrie 4.0
- Drücken
- Walzdrücken
- Umformtechnik
- Cyber-Physical Systems
- CPS
- Internet der Dinge
- Flexible Fertigung