Abstract
The core structure of determining the working efficiency of the pump is plunger. The pump performance and pump well mismatch when the plunger moves continuously in the pump barrel with the appearance of adverse environment. The friction and corrosion between the plunger surface and the pump barrel are serious, which results in the failure of the plunger due to the damage of the outer surface of the plug. It affects the economic benefits and production development of the oilfield seriously. In this article, the non-smooth structure of the two soil organisms (for instance, earthworm and dung beetle) is analyzed and two bionic plungers are designed to address the aforementioned challenges. Initially, a thorough analysis is performed to recognize the main failure forms of the plunger through investigation and analysis of the development of international plunger. Later, the two bionic plungers with the performance of friction and wear reduction are designed using the non-smooth theory. In addition, the standard prototype is developed and the three-dimensional design of the two different plunger is carried out for validation purpose. The results are compared with the standard prototype. The stress environment on the surface of the plunger is improved, and the wear of the plunger is reduced. The effect forces of the two bionic plunger are 13.2% and 17.50%, respectively.
Similar content being viewed by others
References
Chang Z, Sun Y, Zhang Y, Gao Y, Weng X, Chen D, David L, Xie J (2018) Bionic optimization design of electronic nose chamber for oil and gas detection. J Bionic Eng 15(3):533–544
Cong X, Ren L, Wu L et al (1992) Taxonomic study on the surface morphology of geometrically nonsmooth organisms. J Agric Eng 02:7–12
Gao T, Su B, Jiang L, Cong Q (2020a) Influence of bionic pit structure on friction and sealing performance of reciprocating plunger. Adv Mater Sci Eng 2020:1–10
Gao T, Wang X, Sun Y, Cheng X, Cong Q (2020b) Friction and wear performance of bionic stripped piston of BW-160 slime pump. Proc Inst Mech Eng Part C J Mech Eng Sci 234(4):872–881
Ge L (2005) Study on adhesion performance of bionic non stick pot. Jilin University, Changchun
Guo Y, Zhang Z, Zhang S (2019) Advances in the application of biomimetic surface engineering in the oil and gas industry. Friction 7(4):289–306
Hou Q, Yang X, Cheng J, Wang S, Duan D, Xiao J, Li W (2020) Optimization of performance parameters and mechanism of bionic texture on friction surface. Coatings 10(2):171
Hu S (2019) Study on surface texture and sealing characteristics of oil well pump plunger. Changchun University of technology, Changchun
Jin J (2007) Study on wear resistance of bionic structure under lubrication. Jilin University, Changchun
Ke G, Youhong S, Runfeng G, Liang X, Chuanliu W, Yumin L (2009) Application and prospect of bionic non-smooth theory in drilling engineering. Pet Explor Dev 36(4):519–541
Liu G, Li J, Tian X et al (2008) Experiment on reducing viscosity and resistance of earthworm non smooth surface. J Agric Mach 39(9):138–143
Maimaitiming A, Chen H, Wang J (2018) Introduction and application of ANSYS Workbench 180 finite element analysis. Machinery Press, Beijing, p 4
Ren L (2009) Progress in the bionic study on anti-adhesion and resistance reduction of terrain machines. Sci China Ser E Technol Sci 52(2):273–284
Ren L, Liang Y (2010) Biological couplings: function, characteristics and implementation mode. Sci China Technol Sci 52(3):379–387
Ren L, Cong X, Chen B et al (1992) Study on anti sticking characteristics of geometrically nonsmooth typical organisms. J Agric Mach 23(2):29–35
Sakthivel NR, Nair BB, Sugumaran V (2012) Soft computing approach to fault diagnosis of centrifugal pump. Appl Soft Comput 12(5):1574–1581
Shi B, Liu L, Lang J et al (2021) Design and properties of friction materials based on bionic technology. New Chem Mater 06(05):1–10
Song T, Liu Y, Zhou H et al (2007) Friction and wear properties of bionic coupling brake hub prepared by laser. J Jilin Univ (engineering Edition) 37(5):1069–1073
Wang C, Wang C (2020) Design and research of pit shaped pick like dung beetle. Mech Strength 42(02):325–330
Zhang K (2018) Design and experimental research of bionic oil well pump plunger. Jilin University, Changchun
Zheng L (2018) Study on friction and lubrication properties of bionic hexagonal texture surface of oil well pump plunger. Jilin University, Changchun
Funding
The paper was supported by the Key scientific research projects of Hechi University (2019XJZD006), 2017 Guangxi University Middle and young teachers’ scientific research basic ability promotion project (2017KY0579), Design of sanitary robot for Provincial College Students' Innovation Training Project (S202110605066). Cocoon and silk project of Guangxi 2021 special fund for foreign economic and Trade Development: research and demonstration of intelligent silkworm stem and leaf picking equipment system (Gui Gong Xin Fang Yao [2021] No. 231).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declared that they have no conflicts of interest to this work.
Ethical approval
Our paper does not deal with any ethical problems.
Informed consent
We declare that all authors have informed consent.
Additional information
Communicated by Shah Nazir.
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Wang, B., Chen, M., Lu, Z. et al. Optimized design of oil well pump plunger using bionic structure of decision system. Soft Comput 26, 10827–10836 (2022). https://doi.org/10.1007/s00500-022-07019-6
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00500-022-07019-6