Abstract
A bounding procedure combined with an effective error bound method for linear functionals of the displacements and a simple two points displacement extrapolation method is presented to compute the lower and upper bounds to the stress intensity factors in elastic fracture problems. First, the displacements of two nodes (or node pairs) on the crack edges are used to construct the linear extrapolation to obtain the stress intensity factors at the crack tip, so that stress intensity factors are explicitly expressed as linear functionals of the displacements. Then, a posteriori bounding method is utilized to compute the bounds to the stress intensity factors. Finally, the bounding procedure is verified by a mixed-mode homogenous elastic fracture problem and a bimaterial interface crack problem.
Similar content being viewed by others
References
Chan, S.K., Tuba, I.S., Wilson, W.K.: On the finite element method in linear fracture mechanics. Eng Fracture Mech 2, 1–17 (1970)
Irwin, G.R. Analysis of stresses and strain near the end of a crack transversing a plate. J Appl Mech 24, 361–364 (1957)
Rybicki, E.F., Kanninen, M.F.: A finite element calculation of stress factors by a modified crack closure integral. Eng Fracture Mech 9, 931–938 (1977)
Rice, J.R.: A path independent integral and approximate analysis of strain concentration by notches and cracks. J Appl Mech 35, 379–386 (1968)
Ainsworth, M., Oden, J.T.: A posteriori error estimation in finite element analysis. Wiley, New York (2000)
Stein, E. et al. Error-controlled adaptive finite elements in solid mechanics. Wiley, West Sussex (2003)
Rannacher, R., Suttmeier, F.T.: A feed-back approach to error control in finite element methods: application to linear elasticity. Computational Mechanics 19, 434–446 (1997)
Peraire, J., Patera, A.T.: Bounds for linear-functional outputs of coercive partial differential equations: Local indicators and adaptive refinement.In: Ladeveze P, Oden JT (eds) Proceedings of the workshop on new advances in adaptive computational methods in mechanics, Elsevier, Amsterdam (1998)
Oden, J.T., Prudhomme, S.: Goal-oriented error estimation and adaptivity for the finite element method. Comput Math Appl 41, 735–756 (2001)
Ruter, M., Stein, E.: Goal-oriented a posteriori error estimates in elastic fracture mechanics. In: Fifth World Congress on Computational mechanics, Vienna, Austria (2002)
Bank, R.E., Weiser, A.: Some a posteriori error estimators for elliptic partial differential equations. Math Comput 44, 283–301 (1985)
Owen, D.R.J., Fawkes, A.J.: Engineering fracture mechanics: numerical methods and applications. Pineridge, Swansea (1983)
Malyshev, B.M., Salganik, R.L.: The adhesive joints using the theory of crack. Int J Fracture l, 114–128 (1965)
Hutchinson, J.W., Mear, M., Rice, J.R.: Crack paralleling an interface between dissimilar materials. J Appl Mech 54, 828–832 (1987)
Murthy, K.S.R.K., Mukhopadhyay, M.: Adaptive finite element analysis of mixed-mode fracture problems containing multiple crack-tips with an automatic mesh generator. Int J Fracture 108, 251–274 (2001)
Yuuki, R., Cho, S.B.: Efficient boundary element analysis of stress intensity factors for intensive cracks in dissimilar materials. Eng Fracture Mech 9, 931–938 (1977)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Xuan, Z., Khoo, B. & Li, Z. Computing bounds to mixed-mode stress intensity factors in elasticity. Arch Appl Mech 75, 193–209 (2006). https://doi.org/10.1007/s00419-005-0388-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00419-005-0388-3