Garnet + liquid equilibrium

Abstract

New experiments were performed to determine saturation conditions for garnet and silicate liquid. Starting compositions were natural basalt powders ranging from komatiite to nephelinite, which were partially melted at pressures between 25 and 100 kbar. Rounded grains of natural pyrope or grossular were added to some experiments to induce garnet saturation, and to aid the segregation of liquid pools for microprobe analysis. Simple expressions describing K _eq as a function of P, T and liquid composition were calibrated by linear least squares analysis of the data from this, and other, studies. Since garnets do not often occur as phenocrysts, equations were designed to predict garnet compositions when P, T and a silicate liquid composition are given. The regression data have a pressure range of 20–270 kbar, and compositions as diverse as nephelinite and komatiite. These models should thus apply to a broad range of geological problems. The majorite component in garnet was found to increase with increasing P, but compositional effects are also important. A garnet saturation surface applied to liquids with chondritic compositions shows that such liquids crystallize garnet with Mj contents of 0.27–0.42 at 200 kbar. Models of Earth differentiation thus need to account not only for fractionation of majorite, but also for Fe-, Ca-, Na- and Ti-bearing garnet components, which occur in non-trivial quantities at high pressure. Since many models of igneous petrogenesis rely on mineral-melt partition coefficients for the minor elements Na, Ti, and Cr, partition coefficients for these elements were also examined. The K _d ^gar/liq for Na was found to be P-sensitive; Na contents of basalts may thus potentially yield information regarding depths of partial melting.