Abstract
The non-reacting flow field within the combustion chamber of a motored direct-injection spark-ignition engine with tumble intake port is measured. The three-dimensionality of the flow necessitates the measurement of all three velocity components via stereoscopic particle-image velocimetry in multiple planes. Phase-locked stereoscopic PIV is applied at 15 crank angles during the intake and compression strokes, showing the temporal evolution of the flow field. The flow fields are obtained within a set of 14 axial planes, covering nearly the complete cylinder volume. The stereoscopic PIV setup applied to engine in-cylinder flow and the arising problems and solutions are discussed in detail. The three-dimensional flow field is reconstructed and analyzed using vortex criteria. The tumble vortex is the dominant flow structure, and this vortex varies significantly regarding shape, strength, and position throughout the two strokes. The tumble vortex center moves clockwise through the combustion chamber. At first, the tumble has a c-shape which turns into an almost straight tube at the end of the compression. Small-scale structures are analyzed by the distribution of the turbulent kinetic energy. It is evident that the symmetry plane only represents the 3D flow field after 100 CAD. For earlier crank angles, both kinetic energy (KE) and turbulent kinetic energy (TKE) in the combustion chamber are well below the KE and TKE in the symmetry plane. This should be taken into account when the injection and breakup of the three-dimensional fuel jet are studied. The mean kinetic energy is conserved until late compression by the tumble motion. This conservation ensures through the excited air motion an enhancement of the initial air-fuel mixture which is of interest for direct-injection gasoline engines.
Similar content being viewed by others
References
Adomeit P, Lang O, Pischinger S (2000) Spray propagation and mixture formation in an air guided direct injection gasoline engine. Int J Engine Res 1(2):163–170
Benedict L, Gould R (1996) Towards better uncertainty estimates for turbulence statistics. Exp Fluids 22:129–136
Borée J, Maurel S, Bazile R (2002) Disruption of a compressed vortex. Phys Fluids 14(7):2543–2556
Brücker C (1997) 3D scanning PIV applied to an air flow in a motored engine using digital high-speed video. Meas Sci Technol 8:1480–1492
Bücker I, Karhoff D, Dannemann J, Pielhop K, Klaas M, Schröder W (2012) Comparison of PIV measured flow structures in two four-valve piston engines. In: Dillmann A, Heller G, Kreplin HP, Nitsche W, Peltzer I (eds) New results in numerical and experimental fluid mechanics VIII: contributions to the 17th STAB/DGLR Symposium Berlin, Germany, 2010, Notes on Numerical Fluid Mechanics and Multidisciplinary Design, Springer, Berlin, to appear
Calendini PO, Lecerf TDA, Trinite M (2000) In-cylinder velocity measurements with stereoscopic particle image velocimetry in a SI engine. SAE 2000-01-1798
Cosadia I, Borée J, Charnay G, Dumont P (2006) Cyclic variations of the swirling flow in a diesel transparent engine. Exp Fluids 41:115–134
Dannemann J, Pielhop K, Klaas M, Schröder W (2011) Cycle resolved multi-planar flow measurements in a four-valve combustion engine. Exp Fluids 50:961–976
Graftieaux L, Michard M, Grosjean N (2001) Combining PIV, POD and vortex identification algorithms for the study of unsteady turbulent swirling flows. Meas Sci Technol 12:1422–1429
Heywood JB (1988) Internal combustion engine fundamentals. McGraw-Hill, New York
Hill P, Zhang D (1994) The effects of swirl and tumble on combustion in spark-ignition engines. Prog Energ Combust 20:373–429
Huang RF, Lin KH, Yeh CN, Lan J (2009) In-cylinder tumble flows and performance of a motorcycle engine with circular and elliptic intake ports. Exp Fluids 46:165–179
Joo SH, Srinivasan KK, Lee KC, Bell SR (2004) The behaviour of small- and large-scale variations of in-cylinder flow during intake and compression strokes in a motored four-valve spark ignition engine. Int J Engine Res 5(4):317–328
Kallweit S, Willert C, Dues M, Müller U, Lederer T (2008) PIV for volume flow metering. In: 14th International symposium on applications of laser techniques to fluid mechanics
Karhoff DC, Bücker I, Dannemann J, Pielhop K, Klaas M, Schröder W (2011) Experimental analysis of three-dimensional flow structures in two four-valve combustion engines. Tech. rep., SAE 2011-24-0044
Li Y, Zhao H, Peng Z, Ladommatos N (2002) Tumbling flow analysis in a four-valve spark ignition engine using particle image velocimetry. Int J Engine Res 3:139–155
Lumley JL (1999) Engines—an introduction. Cambridge University Press, Cambridge
Mahmood Z, Chen A, Yianneskis M (1996) On the structure of steady flow through dual-intake engine ports. Int J Num Meth Fluids 23:1085–1109
Müller SHR, Bohm B, Gleißner M, Grzeszik R, Arndt S, Dreizler A (2010) Flow field measurements in an optically accessible, direct-injection spray-guided internal combustion engine using high-speed PIV. Exp Fluids 48:281–290
Prasad A (2000) Stereoscopic particle image velocimetry. Exp Fluids 29:103–116
Raffel M, Willert CE, Kompenhans J (1998) Particle image velocimetry. Springer, New York
Raffel M, Willert CE, Wereley ST, Kompenhans J (2007) Particle image velocimetry. Springer, New York
Reeves M, Garner C, Dent J, Halliwell N (1994) Study of barrel swirl in a four-valve optical IC engine using particle image velocimetry. In: COMODIA, Yokohama, Japan
Reuss D, Adrian R, Landreth C, French D, Fansler T (1989) Instantaneous planar measurements of velocity and large-scale vorticity and strain rate in an engine using particle image velocimetry. SAE paper 890616
Reuss DL, Megerle M, Sick V (2002) Particle-image velocimetry measurement errors when imaging through a transparent engine cylinder. Meas Sci Technol 13:1029–1035
Stanislas M, Okamoto K, Kähler C, Westerweel J, Scarano F (2008) Main results of the third international PIV challenge. Exp Fluids 45:27–71
Stansfield P, Wigley G, Justham T, Pitcher JCG (2007) PIV analysis of in-cylinder flow structures over a range of realistic engine speeds. Exp Fluids 43:135–146
Sujudi D, Haimes R (1995) Identification of swirling flow in 3-d vector fields. AIAA Paper 95-1715
Thewes M, Müther M, Pischinger S, Budde M, Brunn A, Sehr A, Adomeit P, Klankermayer J (2011a) Analysis of the impact of 2-methylfuran on mixture formation and combustion in a direct-injection spark-ignition engine. Energy Fuels 25(12):5549–5561
Towers DP, Towers CE (2004) Cyclic variability measurements of in-cylinder engine flows using high-speed particle image velocimetry. Meas Sci Technol 15:1917–1925
Tropea C, Yarin A, and Foss JF (2007) Springer handbook of experimental fluid mechanics. Springer, Berlin. ISBN 978-3-540-25141-5
van Doorne CWH (2004) Stereoscopic PIV on transition in pipe flow. PhD thesis, Technische Universiteit Delft
Voisine M, Thomas L, Borée J (2011) Spatio-temporal structure and cycle to cycle variations of an in-cylinder tumbling flow. Exp Fluids 50(5):1393–1407
Westerweel J (1993) Digital particle image velocimetry. PhD thesis, Delft University Press
Willert C (1997) Stereoscopic digital particle image velocimetry for application in wind tunnel flows. Meas Sci Technol 8:1465-1479
Willert CE (2006) Assessment of camera models for use in planar velocimetry calibration. Exp Fluids 41:135–143
Acknowledgments
This work was performed as part of the Cluster of Excellence “Tailor-Made Fuels from Biomass” and the NRW Forschungsschule “Brennstoffgewinnung aus nachwachsenden Rohstoffen (BrenaRo)”.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Bücker, I., Karhoff, DC., Klaas, M. et al. Stereoscopic multi-planar PIV measurements of in-cylinder tumbling flow. Exp Fluids 53, 1993–2009 (2012). https://doi.org/10.1007/s00348-012-1402-5
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00348-012-1402-5