Skip to main content

Advertisement

Log in

Wake of a cylinder: a paradigm for energy harvesting with piezoelectric materials

  • Research Article
  • Published:
Experiments in Fluids Aims and scope Submit manuscript

Abstract

Short-length piezoelectric beams were placed in the wake of a circular cylinder at high Reynolds numbers to evaluate their performance as energy generators. The coherent vortical structures present in this flow generate a periodic forcing on the beam which when tuned to its resonant frequency produces maximum output voltage. There are two mechanisms that contribute to the driving forcing of the beam. The first mechanism is the impingement of induced flow by the passing vortices on one side of the beam, and the second is the low pressure core region of the vortices which is present at the opposite side of the beam. The sequence of these two mechanisms combined with the resonating conditions of the beam generated maximum energy output which was also found to vary with the location in the wake. The maximum power output was measured when the tip of the beam is about two diameters downstream of the cylinder. This power drops off the center line of the wake and decays with downstream distance as (x/D)−3/2.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17

Similar content being viewed by others

References

  • Akaydin HD, Elvin N, Andreopoulos Y (2010) Energy harvesting from highly unsteady fluid flows using piezoelectric materials. J Intell Mater Struct (accepted for publication)

  • Allen JJ, Smits AJ (2001) Energy harvesting Eel. J Fluids Struct 15:629–640

    Article  Google Scholar 

  • Andreopoulos J, Agui JH (1996) Wall-vorticity flux dynamics in a two-dimensional turbulent boundary layer. J Fluid Mech 209:45–84

    Article  Google Scholar 

  • Andreopoulos Y, Honkan A (2001) An experimental study of the dissipative and vortical motion in turbulent boundary layers. J Fluid Mech 439:131–163

    Article  MATH  Google Scholar 

  • Anton SR, Sodano HA (2007) A review of power harvesting using piezoelectric materials (2003–2006). Smart Mater Struct 16:R1–R21. doi:10.1088/0964-1726/16/3/R01

    Article  Google Scholar 

  • Beal DN, Hover FS, Triantafylou MS, Liao JC, Lader GV (2006) Passive propulsion in vortex wakes. J Fluid Mech 549:385–402

    Article  Google Scholar 

  • Bendat J, Piersol AG (2000) Random data, 3rd edn. Wiley, New York

    MATH  Google Scholar 

  • Bloor MS (1964) The transition to turbulence in the wake of a circular cylinder. J Fluid Mech 19:290–304

    Article  MATH  Google Scholar 

  • Brede M (2004) Measurement of turbulence production in the cylinder separated shear layer using event triggered laser-Doppler anemometry. Exp Fluids 36:860–866

    Article  Google Scholar 

  • Dong S, Karniadakis GE, Ekmekci A, Rockwell D (2006) A combined DNS-PIV study of the turbulent near wake. J Fluid Mech 569:185–207

    Article  MATH  Google Scholar 

  • Eldredge JD, Piscani D (2008) Passive locomotion of a simple articulated fish-like system in the wake of an obstacle. J Fluid Mech 607:279–288

    Article  MATH  Google Scholar 

  • Elvin NG, Elvin AA (2009a) A general equivalent circuit model for piezoelectric generators. J Intell Mater Syst Struct 20:3–9

    Article  Google Scholar 

  • Elvin NG, Elvin AA (2009b) A coupled finite element-circuit simulation model for analyzing piezoelectric energy generators. J Intell Mater Syst Struct 20: 587–595. March 2009. doi: 10.1177/1045389X08101565

    Google Scholar 

  • Elvin N, Lajnef N, Elvin A (2006) Feasibility of structural monitoring with vibration powered sensors. Smart Mater Struct 15(4):977–986

    Article  Google Scholar 

  • Erturk A, Inman DJ (2008) A distributed parameter electromechanical model for cantilevered piezoelectric energy harvesters. J Vib Acoust 130:041002

    Article  Google Scholar 

  • Hwang J-Y, Yang K-S (2007) Drag reduction on a circular cylinder using dual detached splitter plates. J Wind Eng Ind Aerodyn 95:551–564

    Article  Google Scholar 

  • Lau YL, So RMC, Leung RCK (2004) Flow-induced vibration of elastic slender structures in a cylinder wake. J Fluids Struct 19:1061–1083. doi:10.1016/j.jfluidstructs.2004.06.007

    Article  Google Scholar 

  • Lin JC, Towfighi J, Rockwell D (1995) Instantaneous structure of the near wake of a circular cylinder: on the effect of Reynolds number. J Fluids Struct 9:409–418

    Article  Google Scholar 

  • Mitcheson PD, Yeatman EM, Rao GK, Holmes AS, Green TC (2008) Energy harvesting from human and machine motion for wireless electronic devices. Proc IEEE 96(9):1457–1486

    Article  Google Scholar 

  • Mittal S, Raghuvanshi A (2001) Control of vortex shedding behind circular cylinder for flows at low Reynolds numbers. Int J Numer Meth Fluids 35:421–447

    Article  MATH  Google Scholar 

  • Monkewitz P, Nguyen LN (1986) Absolute instability in the near wake of two-dimensional bluff bodies. J Fluids Struct 1:165–184

    Article  Google Scholar 

  • Paradiso JA, Starner T (2005) Energy scavenging for mobile and wireless electronics. Pervasive Comput 4(1):18–27

    Google Scholar 

  • Pobering S, Schwesinger N (2004) A novel hydropower harvesting device. Proceedings—2004 International Conference on MEMS, NANO and Smart Systems, ICMENS 2004, pp 480–485

  • Prasad A, Williamson CHK (1996) The instability of the separated shear layer from a bluff body. Phys Fluids 8:1347–1349

    Article  Google Scholar 

  • Prasad A, Williamson CHK (1997a) The instability of a shear layer separating from a bluff body. J Fluid Mech 333:375–402

    Article  MathSciNet  Google Scholar 

  • Prasad A, Williamson CHK (1997b) Three-dimensional effects in turbulent bluff body wakes at moderate Reynolds numbers. J Fluid Mech 343:235–265

    Article  MathSciNet  Google Scholar 

  • Prasad A, Williamson CHK (1997c) Three-dimensional effects in turbulent bluff body wakes. Exp Therm Fluid Sci 14:9–16

    Article  Google Scholar 

  • Rajagopalan S, Antonia RB (2005) Flow around a circular cylinder—structure of the near wake shear layer. Exp Fluids 38:393–402

    Article  Google Scholar 

  • Robbins WP, Marusic I, Morris D, Novak TO (2006) Wind-generated electrical energy using flexible piezoelectric materials. Proceedings of IMECE2006 2006 ASME International Mechanical Engineering Congress and Exposition, November 5–10, 2006, Chicago, Illinois

  • Roshko A (1954) On the development of turbulent wakes from vortex streets. NACA Report 1191

  • Sahele M, Liu Y, Hoffman H (2005) Piezoelectric energy harvesting using different approaches including control system. Annu Res J III:134–141

    Google Scholar 

  • Schmidt VH (1992) Piezoelectric energy conversion in windmills. Proceedings of IEEE Ultrasonics Symposium, pp 897–904

  • Shukla S, Govardhan RN, Arakeri JH (2009) Flow over a cylinder with a hinged-splitter plate. J Fluids Struct. ISSN 0889-9746, doi: 10.1016/j.jfluidstructs.2008.11.004

  • Sodano HA, Park G, Inman DJ (2004) A review of power harvesting from vibration using piezoelectric materials. Shock Vib Digest 36(3):197–205

    Article  Google Scholar 

  • Sodano HA, Inman DJ, Park G (2005) Generation and storage of electricity from power harvesting devices. J Intell Mater Syst Struct 16:67–75

    Article  Google Scholar 

  • Taylor GW, Burns JR, Kammann SM, Powers WB, Welsh TR (2001) The energy harvesting eel: a small subsurface ocean/river power generator. IEEE J Ocean Eng 26(4):539–547

    Article  Google Scholar 

  • Unal MF, Rockwell D (1988) On vortex formation from a cylinder. Part II. Control by splitterplate interference. J Fluid Mech 190:513–529

    Article  Google Scholar 

  • Williamson CHK (1996) Vortex dynamics in the cylinder wake. Annu Rev Fluid Mech 28:477–539

    Article  Google Scholar 

  • Zdravkovich M (1997) Flow around circular cylinders, vol. 1. Oxford University Press, Oxford

    MATH  Google Scholar 

Download references

Acknowledgments

The present work is sponsored by the Michael Pope Fund for Energy Research.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Y. Andreopoulos.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Akaydın, H.D., Elvin, N. & Andreopoulos, Y. Wake of a cylinder: a paradigm for energy harvesting with piezoelectric materials. Exp Fluids 49, 291–304 (2010). https://doi.org/10.1007/s00348-010-0871-7

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00348-010-0871-7

Keywords

Navigation