Abstract
We present an experimental study on flow control over a classic 3D bluff-body used in automotive aerodynamics (Ahmed 1983). Flow control is achieved through moving flaps fixed on every edge around the two rear flat surfaces of the model. Different pairs of flaps, with variable angle compared to the walls, are tested. Parametric studies show that the most efficient configuration for the flaps is along the side edges of the rear slant, i.e. in the region where longitudinal vortices are created, and also at the junction between the roof and the rear slant, where the flow separates. We also explore the combinations of different flap configurations. We find interesting results showing cumulative effects between some configurations leading to −25% drag reduction and −105% lift reduction. Finally, particle image velocimetry measurements show that one of the key effects is the control of the longitudinal vortices created at the side edges of the rear slant.
Similar content being viewed by others
References
Ahmed SR (1983) Influence of base slant on the wake structure and drag of road vehicles. J Fluids Eng 105:429–434
Ahmed SR, Ramm R, Faltin G (1984) Some salient features of the time-averaged ground vehicle wake. SAE paper 840300, pp 1–30
Aider JL, Elena L, Sant YL, Bouvier F, MTrienne MC, Peron JL (2001) Pressure sensitive paint for automotive aerodynamics. SAE paper 2001-01-0627
Beaudoin JF, Cadot O, Aider JL, Gosse K, Paranthoën P, Hamelin B, Tissier M, Allano D, Mutabazi I, Gonzales M, Wesfreid JE (2004) Characterization of longitudinal vortices on a 3d bluff body using cavitation. Exp Fluids 37:763–768
Choi H, Moin P, Kim J (1994) Active turbulence control for drag reduction on wall-bounded flows. J Fluid Mech 262:75–110
Drouin V, Giovannini A, Gillieron P (2002) Topology and characterization of the vortical near-wake flow over a simplified car model. In: Proceedings of the bluff body wakes and vortex induced vibrations (BBVIV3) conference, Port-Douglas, Australia
Duell EG, George AR (1999) Experimental study of a ground vehicle body unsteady near wake. SAE paper 1999-01-0812
Gad-El-Hak M, Bushnell DM (1991) Separation control: review. J Fluids Eng 113:5–30
Greenblatt D, Wygnanski IJ (2000) The control of flow separation by periodic excitation. Prog Aerospace Sci 36:487–545
Hucho WH (1998) Aerodynamics of road vehicles. Cambridge University Press, Cambridge
Joslin RD (1998) Aircraft laminar flow control. Annu Rev Fluid Mech 30:1–29
Khalighi B, Zhang S, Koromilas C, Brenal SBP, Laccarino G, Moin P (2001) Experimental and computational study of unsteady wake flow behind a bluff body with a drag reduction device. SAE paper 2001-01B-207
Kim J (2003) Control of turbulent boundary layers. Phys Fluids 15(5):1093–1105
Krajnović S, Davidson L (2004) Large-eddy simulation of the flow around simplified car model. SAE paper 2004-01-0227
Krajnović S, Davidson L (2005) Flow around a simplified car part 2: understanding the flow. J Fluids Eng 127:919–928
Lasserre JJ, Aider JL, Despré C (2003) Déflecteurs mobiles pour réduire la traînée et la portance d’une automobile—mobile flaps to reduce the drag and lift of a road vehicle. Patent FR 03.05919, PSA Peugeot-Citroën
Lienhart H, Becker S (2003) Flow and turbulence structures in the wake of a simplified car model. SAE paper 2003-01-0656
Lumley JL, Blossey PN (1998) Control of turbulence. Annu Rev Fluid Mech 30:311–327
Simpson L (1989) Turbulent boundary layer separation. Annu Rev Fluid Mech 21:205–234
Strachan RK, Knowles K, Lawson NJ (2007) The vortex structure behind an ahmed reference model in the presence of a moving ground plane. Exp Fluids 42:659–669
Acknowledgments
We would like to thank G. Hulin, A. Lebau for their contribution to wind tunnel measurements and D. Pradal for the conception of the motorized flaps.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Beaudoin, JF., Aider, JL. Drag and lift reduction of a 3D bluff body using flaps. Exp Fluids 44, 491–501 (2008). https://doi.org/10.1007/s00348-007-0392-1
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00348-007-0392-1