Abstract.
The saturation behavior of diffraction efficiency has been experimentally studied and theoretically modeled in azobenzene polyesters by recording polarization gratings with two beams of orthogonal circular polarization. The model is an extension of the phenomenological expression of Kakichashvili, derived from the rate equations for photoanisotropic materials, taking into account the effect of saturation with time and intensity. The saturation model of the polyester material can be used for the computer simulation of a polarization holographic data storage system under development. The simulation is based on fast Fourier transforms, taking the parameters of the recording material and the optical processes into account. Agreement between measured and simulated results proves the applicability of the saturation model as an efficient tool in the optimization of the system.
Similar content being viewed by others
Author information
Authors and Affiliations
Additional information
Received: 16 September 2002 / Published online: 3 April 2003
RID="*"
ID="*"Corresponding author. Fax: +36-1/463-4194, E-mail: pvarhe@math.bme.hu
Rights and permissions
About this article
Cite this article
Várhegyi, P., Kerekes, Á., Sajti, S. et al. Saturation effect in azobenzene polymers used for polarization holography . Appl Phys B 76, 397–402 (2003). https://doi.org/10.1007/s00340-003-1104-z
Issue Date:
DOI: https://doi.org/10.1007/s00340-003-1104-z