Abstract
We report on the generation of radially and azimuthally polarized Q-switched laser radiation and its application in material processing. The power levels were sufficiently high to study micro-hole drilling in different metals. Depending on the optical properties of the metal, either radial or azimuthal polarization shows the best efficiency and the effect is attributed to waveguiding. For steel, a comparison to linearly or circularly polarized laser radiation indicates that the doughnut-shaped beam with azimuthal polarization is the most energy-efficient in producing holes of the same diameter and depth.
Similar content being viewed by others
References
V.G. Niziev, A.V. Nesterov, J. Phys. D 32, 1455 (1999)
C. Varin, M. Piché, M.A. Porras, Phys. Rev. E 71, 026603 (2005)
R. Dorn, S. Quabis, G. Leuchs, Phys. Rev. Lett. 91, 233901 (2003)
Q. Zhan, Opt. Express 12, 3377 (2004)
S.C. Tidwell, G.H. Kim, W.D. Kimura, Appl. Opt. 32, 5222 (1993)
Y. Mushiake, K. Matsumura, N. Nakajima, Proc. IEEE 60, 1107 (1972)
C.-C. Shih, Proc. SPIE 2889, 410 (1996)
D. Pohl, Appl. Phys. Lett. 20, 266 (1972)
A.V. Nesterov, V.G. Niziev, V.P. Yakunin, J. Phys. D 32, 2871 (1999)
I. Moshe, S. Jackel, A. Meir, Opt. Lett. 28, 807 (2003)
M. Roth, E. Wyss, H. Glur, H.P. Weber, Opt. Lett. 30, 1665 (2005)
T. Moser, H. Glur, V. Romano, F. Pigeon, O. Parriaux, M.A. Ahmed, T. Graf, Appl. Phys. B 80, 707 (2005)
J.-F. Bisson, J. Li, K. Ueda, Y. Senatsky, Opt. Express 14, 3304 (2006)
D. Bäuerle, Laser Processing and Chemistry, 3rd edn. (Springer, Berlin Heidelberg New York, 2000)
W.M. Steen, K. Watkins, Laser Material Processing, 3rd edn. (Springer, Berlin Heidelberg New York, 2003)
H. Ki, P.S. Mohanty, J. Mazumder, J. Laser Appl. 14, 39 (2002)
T.V. Kononenko, V.I. Konov, S.V. Garnov, S.M. Klimentov, F. Dausinger, Laser Phys. 11, 343 (2001)
J.F. Ready, Industrial Applications of Lasers, 2nd edn. (Academic Press, San Diego, CA, 1997)
M.F. Modest, ASME J. Heat Transf. 128, 653 (2006)
M. Meier, H. Glur, E. Wyss, T. Feurer, V. Romano, Proc. SPIE 6053, 312 (2005)
R.J. Freiberg, A.S. Halsted, Appl. Opt. 8, 355 (1969)
S.V. Govorkov, E.V. Slobodtchikov, A.O. Wiessner, D. Basting, Lambda Phys. Highlights 57, 3 (2000)
J.M. Lee, K.G. Watkins, W.M. Steen, J. Manuf. Sci. Eng. 123, 521 (2001)
P. Mottner, Fraunhofer ISC Ann. Report (2004), pp. 28–29
Author information
Authors and Affiliations
Corresponding author
Additional information
PACS
79.20.Ds; 29.27.Hj; 81.05.Bx
Rights and permissions
About this article
Cite this article
Meier, M., Romano, V. & Feurer, T. Material processing with pulsed radially and azimuthally polarized laser radiation. Appl. Phys. A 86, 329–334 (2007). https://doi.org/10.1007/s00339-006-3784-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00339-006-3784-9