Poroelastic analysis of cover-collapse sinkhole formation by piezometric surface drawdown

Abstract.

Where the water table is above the soil–rock contact in karst regions, cover-collapse sinkholes in the soil and soft sediment above the rock commonly occur as a result of drawdown of the piezometric surface in the karst aquifer. Transient stresses and pore pressures around soil voids at the soil–rock contact can cause hydraulic fracturing of the soil near the wall of the void. After the first such fracture, successive sloughing of soil propagates the soil void rapidly to the surface, resulting in a cover-collapse sinkhole. Sinkhole formation by this mechanism should be strongly a function of rate and magnitude of piezometric surface drawdown, permeability and tensile strength of the soil, and the size, depth, and geometry of the initial soil void. Large soil voids and those with walls that are partly planar or of low curvature are most susceptible to hydraulic fracture and the resulting progression to sinkhole formation.