Abstract
Three-dimensional printing called rapid prototyping, a technology that is used to create physical models based on a 3-D computer representation, is now commercially available and can be created from CT or MRI datasets. This technical innovation paper reviews the specific requirements and steps necessary to apply biomedical 3-D printing of pediatric musculoskeletal disorders. We discuss its role for the radiologist, orthopedist and patient.
Similar content being viewed by others
References
Beaman JJ, Barlow JW, Bourell DL et al (eds) (1997) Solid freeform fabrication: a new direction in manufacturing: with research and applications in thermal laser processing. Springer, New York
Rivera J, Goasduff L (2013) Gartner says early adopters of 3D printing technology could gain an innovation advantage over rivals. Accessed via http://www.gartner.com/newsroom/id/2388415
Sailer HF, Haers PE, Zollikofer CP et al (1998) The value of stereolithographic models for preoperative diagnosis of craniofacial deformities and planning of surgical corrections. Int J Oral Maxillofac Surg 27:327–333
Mizutani J, Matsubara T, Fukuoka M et al (2008) Application of full-scale three-dimensional models in patients with rheumatoid cervical spine. Eur Spine J 17:644–649
Kakarala G, Toms AD, Kuiper J-H (2006) Stereolithographic models for biomechanical testing. Knee 13:451–454
Markert M, Weber S, Lueth TC (2007) A beating heart model 3D printed from specific patient data. Conf Proc IEEE Eng Med Biol Soc 2007:4472–4475
Ebert LC, Thali MJ, Ross S (2011) Getting in touch – 3D printing in forensic imaging. Forensic Sci Int 211:e1–e6
Esses SJ, Berman P, Bloom AI, Sosna J (2011) Clinical applications of physical 3D models derived from MDCT data and created by rapid prototyping. AJR 196:W683–8
Cooke T, Jäkel F, Wallraven C et al (2007) Multimodal similarity and categorization of novel, three-dimensional objects. Neuropsychologia 45:484–495
Conflicts of interest
None
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Starosolski, Z.A., Kan, J.H., Rosenfeld, S.D. et al. Application of 3-D printing (rapid prototyping) for creating physical models of pediatric orthopedic disorders. Pediatr Radiol 44, 216–221 (2014). https://doi.org/10.1007/s00247-013-2788-9
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00247-013-2788-9