Abstract.
A prediction methodology based on Monte-Carlo simulation model, developed for flat conforming surfaces in contact, is modified and extended to predict contact conductance between curvilinear surfaces like cylinders and spheres. Experiments are also conducted in vacuum for the measurement of contact conductance between stainless steel and aluminium cylindrical contacts and stainless steel spherical contacts over a range of contact pressures. The contact conductance between cylindrical and spherical bodies is, in general, about an order of magnitude lower than for flat surfaces in contact. Increase of surface roughness and decrease in contact pressure lowers the contact conductance. However, the influence of these parameters is larger than those obtained for flat surfaces. The prediction for different parametric conditions agree closely with those measured in the experiments.
Similar content being viewed by others
References
Clausing AM; Chao BT (1965) Thermal contact resistance in vacuum environment. ASME J Heat Transfer 87: 243–251
Mikic BB (1974) Thermal contact conductance; theoretical considerations. Int J Heat Mass Transfer 17: 205–214
Rostami AA; Hassan AY; Lim PC (2001) Parametric study of thermal constriction resistance. Heat Mass Transfer 37: 5–10
Leung M; Hsieh CK; Goswami DY (1998) Prediction of thermal contact conductance in vacuum by statistical mechanics. ASME J Heat Transfer 120: 51–57
Sunil Kumar S; Ramamurthi K (2001) Prediction of thermal contact conductance in vacuum using Monte-Carlo simulation. J Thermophys Heat Transfer 15: 27–33
Madhusudana CV (1999) Thermal contact conductance of cylindrical joints. Int J Heat Mass Transfer 42: 1273–1287
Sheffield TJ; Wood RA; Sauer HJ Jr (1989) Experimental investigation of thermal contact conductance of finned tube contacts. Exp Therm Fluid Sci 2: 107–121
Dart DM (1959) Effect of fin bond on heat transfer. ASHRAE J 1: 67–71
Gardner KA; Carnavos TC (1960) Thermal contact conductance in finned tubings. Trans ASME J Heat Transfer 82: 279–293
Kulkarni MV; Young EH (1966) Bimetallic finned tube. Chem Engg Prog 62(7): 68–71
Kitscha WW; Yovanovich MM (1975) Experimental investigation on the overall thermal resistance of sphere-flat contacts. Heat transfer with thermal control application. Progress Astronautics Aeronautics 39: 93–110
Fischer NJ; Yovanovich MM (1989) The constriction resistance of sphere/layered flat contacts: theory and experiments. J Heat Transfer 109: 249–256
Bejan A (1989) Theory of rolling contact heat transfer. J Heat Transfer 111: 257–262
Greenwood JA; Tripp JH (1967) The elastic contact of rough spheres. ASME J Appl Mech 34:153–159
Schneider GE; Strong AB; Yovanovich MM (1977) Transient thermal response of two bodies communicating through a small circular contact area. Int J Heat Mass Transfer 20: 301–307
Yovanovich MM; Kitscha WW (1974) Modeling the effect of air and oil upon the thermal resistance of a sphere-flat contact. Thermophysics and spacecraft thermal control. Prog Astronautics Aeronautics 35: 293–319
Seely FB; Smith JO (1963) Advances in mechanics of materials, Chapter 11, Wiley, NY
Timoshenko SP; Goodier JN (1970) Theory of elasticity, 3rd edn, McGraw-Hill, New York, pp 416
Konhauser M (1951) A note on elastic deformation. ASME J Appl Mech 18: 251–252
Yovanovich MM (1969) Overall constriction resistance between contacting, rough, wavy walls. Int J Heat Mass Transfer 12: 1517–1520
Thomas TR; Sayles RS (1975) Random process analysis of the effect of waviness on thermal contact resistance. Prog Astronautics Aeronautics 39: 3–20
Madhusudana CV (1996) Thermal contact conductance. Mechanical Engineering Series, Springer-Verlag, New York, pp 35
Marotta EE; Fletcher LS (2001) Thermal contact resistance models of non-flat, roughened surfaces with metallic coatings. ASME J Heat Transfer 123: 11–23
Sunil Kumar S; Ramamurthi K (2002) Control of thermal contact conductance by surface coatings. Proceedings of the 16th National and 5th ISHMT-ASME Heat and Mass Transfer Conference, pp 221–228, January, Calcutta
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Sunil Kumar, S., Abilash, P.M. & Ramamurthi, K. Thermal contact conductance for cylindrical and spherical contacts. Heat and Mass Transfer 40, 679–688 (2004). https://doi.org/10.1007/s00231-003-0433-0
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00231-003-0433-0