Abstract.
Solutions of the heat capacity versus temperature in a one-dimensional slab have been studied for different types of dependency (lineal, sinusoidal, piece-wise and rectangular) under boundary conditions of natural and forced convection on both sides of the slab. The input data of this inverse problem are the temperature history ("measurements") at a particular location within the slab, obtained by adding a specified random error to the set of temperatures which are the solution of the direct problem. No prior information is used as regards the temperature-dependent functional forms of the unknown heat capacity. In all cases, a piece-wise function is used to approach the solution. Using a programming routine that minimises a classical predefined functional, successive stretches of this piece-wise function are obtained step by step by (i) fixing its length and (ii) increasing or decreasing its slope. The Network Simulation Method is used to solve both the direct and inverse problems. No mathematical manipulations of the finite-difference differential equations are required by the programmer, since they are contained in the computer code used in the method. The basic network for the inverse problem, which is basically the same as for the direct problem, is easy to design and has very few devices. Several examples are shown to prove the accuracy and effectiveness of the proposed method.
Similar content being viewed by others
References
Pavlov, P.V. y Jojlov, A.F., "Física del estado sólido". Ed. Mir, Moscú, 1987
Rao, M.A. and Rizvi, S.S.H. Engineering properties of foods. Food-Analysis. Series: Food science and technology. Marcel Dekker Inc., New York, 1986
Beck, J.V., Blackwell, B., and St. Clair, C.R. Jr. Inverse heat conduction, ill-posed problems. Wiley-Interscience Pub. New York, 1985
Sawaf, B., Özisik, M.N., Jarny, Y., An inverse analysis to estimate linearly temperature dependent thermal conductivity components and heat capacity of an orthotropic medium, Int. Journal Heat Mass Transfer, 38, (16), 3005–3010, 1995
Huang, C.H., and Yan, J.Y., An inverse problem in simultaneously measuring temperature-dependent thermal conductivity and heat capacity, Int. Journal Heat Mass Transfer, 38 (18), 3433–3441, 1995
Yang, Ching-Yu, Determination of the temperature dependent thermophysical properties from temperature responses measured at medium's boundaries, Int. Journal of Heat Mass Transfer 43, 1261–1270, 2000
Mc Adams, W.H., Heat transmission. 3rd ed., New York, McGraw Hill, 1954
S.K. Park and K.W. Miller, Random Numbers Generator: Good Ones are Hard to Find, Communications ACM, 31, 1192–1201, 1988
González-Fernández C.F., Alhama, F., López Sánchez, J.F. and Horno, J. Application of the network method to heat conduction processes with polynomial and potential-exponentially varying thermal properties. Numer. Heat Transf. A, Appl. 33, 549–559, 1998
Alhama, F., López Sánchez, J. y González-Fernández, C.F. Heat conduction through a multilayered wall with variable boundary conditions. Energy, 22, 797–803, 1997
Alhama F. Transient thermal responses in non-lineal heat conduction processes. Ph.D. Thesis. University of Murcia, Spain, 1999
PSPICE 6.0, 1994. Microsim Corporation, 20 Fairbanks, Irvine, California 92718
Nagel, L.W. SPICE, a Computer Program to Simulate Semiconductor Circuits. Chaps.4, 5, 6, Memo UCB/ERL M520, University of California, Berkeley, CA, 1977
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zueco, J., Alhama, F. & González Fernández, C.F. An inverse problem to estimate temperature dependent heat capacity under convection processes. Heat and Mass Transfer 39, 599–604 (2003). https://doi.org/10.1007/s00231-002-0365-0
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00231-002-0365-0