Abstract
Twelve commercial nominal 4 × 8 ft.2 (1,200 × 2,400 mm2) wood-based panels, Medium Density Fiberboard, Particleboard, Oriented Strand Board and Plywood, were scanned for horizontal density distribution using a high resolution and accuracy digital X-ray system. Density distribution at a size of grid cell varying from 0.5 × 0.5 to 12 × 12 in.2 (12.7 × 12.7 to 304.8 × 304.8 mm2) was analyzed based on the X-ray scanned images of the panels. Detailed density distribution characteristics of the four types of wood-based panels are presented in this research. Comparisons of density variation are carried out between different panel types and between different spatial resolutions (i.e. sizes of grid cells). Results of analysis and comparison in density distribution are presented in different forms with industrial as well as academic implications.
Similar content being viewed by others
References
Akbulut T, Koc E (2004) The effects of the panel density, panel temperature and cutter sharpness during edge machining on the roughness of the surface and profiled areas of medium density fiberboard. Forest Prod J 54(12):67–70
Brochmann J, Edwardson C, Shmulsky R (2004) Influence of resin type and flake thickness on properties of OSB. Forest Prod J 54(3):51–55
Cai Z, Muehl JH, Winandy JE (2006) Effects of panel density and mat moisture content on processing medium density fiberboard. Forest Prod J 56:20–25
Chen S (2001) Reducing OSB density variability. Report for Alberta Innovation and Science, FPLE 1059, Alberta Research Council
Chen S, Wellwood R (2002) Nondestructive evaluation of oriented strand board. In: Proceedings of the 13th international symposium on nondestructive testing of wood, University of California, Berkeley, California, USA, August 19–21
Dai C, Steiner PR (1994) Spatial structure of wood composites in relation to processing and performance characteristics: Part II. Modelling and simulation of a randomly-formed flake layer network. Wood Sci Technol 28:135–146
Kelly MW (1977) Critical literature review of relationships between processing parameters and physical properties of particleboard. Gen. Tech. Rep. FPL-10. Forest Products Laboratory. Forest Service. US Department of Agriculture. USA, pp 66
Kollmann FP, Côté WA (1968) Principle of wood science and technology. Part I Solid wood. Springer, Berlin
Kruse K, Dai C, Pielasch A (2000) An analysis of strand and horizontal density distributions in oriented strand board (OSB). Holz Roh Werkst 58(4):270–277
Lee AWC, Stephens CB (1988) Comparative shear strength of seven types of wood composite panels at high and medium relative humidity conditions. Forest Prod J 38:49–52
Maloney TM (1993) Modern particleboard and dry-process fiberboard manufacturing. Miller Freeman, San Francisco
Shi JL, Zhang SY, Riedl B (2005) Effect of juvenile wood on strength properties and dimensional stability of black spruce medium density fiberboard panels. Holzforschung 59(1):1–9
Steiner RP, Xu W (1995) Influence of flake characteristics on horizontal density distribution of flakeboard. Forest Prod J 45(4):61–66
Stritesky VF, Timusk PC (2005) Moisture related properties of Oriented Strand Board (OSB). In: 10DBMC international conference on durability of building materials and components LYON, France, 17–20 April 2005
Suchsland O, Woodson GE (1986) Fiberboard manufacturing practices in the United States. Agriculture Handbook No. 640. United States Department of Agriculture
Wang X, Salenikovich A, Mohammad M (2007) Localized density effects on fastener holding capacities in woodbased panels. Forest Prod J 57(1/2):103–109
Xu W, Steiner RP (1995) A statistical characterisation of the horizontal density distribution in flakeboard. Wood Fibre Sci 27(2):160–167
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Chen, S., Liu, X., Fang, L. et al. Digital X-ray analysis of density distribution characteristics of wood-based panels. Wood Sci Technol 44, 85–93 (2010). https://doi.org/10.1007/s00226-009-0256-3
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00226-009-0256-3