Abstract
There is a great need for techniques which enable reproducible separation of extracellular vesicles (EVs) from biofluids with high recovery, purity and throughput. The development of new techniques for isolation of EVs from minute sample volumes is instrumental in enabling EV-based biomarker profiling in large biobank cohorts and paves the way to improved diagnostic profiles in precision medicine. Recent advances in microfluidics-based devices offer a toolbox for separating EVs from small sample volumes. Microfluidic devices that have been used in EV isolation utilise different fundamental principles and rely largely on benefits of scaling laws as the biofluid processing is miniaturised to chip level. Here, we review the progress in the practicality and performance of both passive devices (such as mechanical filtering and hydrodynamic focusing) and active devices (using magnetic, electric or acoustic fields). As it stands, many microfluidic devices isolate intact EV populations at higher purities than centrifugation, precipitation or size-exclusion chromatography. However, this comes at a cost. We address challenges (in particular low throughput, clogging risks and ability to process biofluids) and highlight the need for more improvements in microfluidic devices. Finally, we conclude that there is a need to refine and standardise these lab-on-a-chip techniques to meet the growing interest in the diagnostic and therapeutic value of purified EVs.
Graphical abstract
![](http://media.springernature.com/lw685/springer-static/image/art%3A10.1007%2Fs00216-022-04362-3/MediaObjects/216_2022_4362_Figa_HTML.png)
Similar content being viewed by others
Avoid common mistakes on your manuscript.
Introduction
The term microfluidic devices covers an excitingly broad range of fluidic concepts and applications. On a basic level, they describe systems which handle fluids in microlitre volumes within structures of micrometre-scale dimensions. The power of these kinds of devices, to perform high-performance separations of particle populations in a fluid, was demonstrated with field-flow fractionation (FFF) pioneered by Giddings [1]. In FFF (see Fig. 1), deterministic fluid handling controls particle motion along flow vectors with only diffusion (driven by Brownian motion) affecting their mean distance above the accumulation wall with respect to the field. The elution time of populations of particles with different Brownian motion will vary and allow separation of a wide range of colloidal sizes and materials. FFF has the potential to use different fields (including but not limited to sedimentation, magnetic, dielectric, acoustic, cross-flow, shear and concentration gradients), which leaves many parameters to be optimised and devices still unexplored [1].
Schematic of FFF of two component particle populations X and Y via the normal mode operation with view a the microfluidic channel with mixed inflow and sorted outflow and b the flow profile across the channel and the different wall displacement of two components due to different field interactions. Illustration from [2]. Reprinted with permission from AAAS
Recent advances in fabrication and modes of operation have driven increasing interest in applications for biological nanoparticle processing. This review focuses on microfluidic techniques for isolating extracellular vesicles, an area of active research which lacks standards for performance characterisation. EV separation from biofluids requires short processing times and low sample volumes with the added challenges of recovery and specificity [3]. However, microfluidic techniques show great promise in tackling these challenges. In general, microfluidic devices, as with FFF, rely on microscale deterministic fluidic handling; however, they can be described as ‘passive’ or ‘active’, depending on the separation mechanism. Antibodies can be used to manipulate biological species, whereas label-free techniques depend on physical properties. In this way, we can categorise microfluidic devices, comparing their versatility and highlighting areas which show the most promise for EV separation.
Extracellular vesicle isolation
Extracellular vesicles (EVs) are particles possessing a lipid bilayer membrane and originating from cells, but which do not themselves have a functional nucleus, as illustrated in Fig. 2 [3]. Evidence suggests that such vesicles hold the key to information transport between cells, but knowledge of their contents is still evolving [3]. Historically, EVs have been subpopulated by their cellular mechanism of origins into three groups with varying sizes. Exosomes (30–100 nm) and microvesicles (100–1000 nm) are released constitutively or by activation. Apoptotic bodies (50–2000 nm) are generated during cell death [4]. Since EVs are studied from cell cultures and biological fluids, where biogenesis cannot be directly observed, it is impractical to subpopulate in this way. It is more useful to categorise EVs by size, density, biochemical composition, or descriptions of conditions or the cell of origin [3]. Biochemical composition can include the expression of cell surface markers on the EVs, like tetraspanins CD63 and/or CD81. Furthermore, EVs may contain proteins, RNAs, DNA and other biomarkers reflecting a patient’s health status.
Standard EV isolation methods
The diagnostic potential of EVs is already considered a Holy Grail and is being explored extensively in the search for disease-related biomarkers. Current methods of isolating EVs have significant limitations in quantification from small volumes of biofluids and co-isolated proteins impede diagnostic capabilities. The methods discussed in this section are the current gold standards, yet it is evident that these will need to be complemented by a new generation of reliable and versatile devices like those detailed in the main body of this report.
Ultracentrifugation
Much of the progress in EV research has relied on ultracentrifugation (UC) to purify and isolate them from biofluids. As in traditional centrifugation for cell handling, biological species can be separated by their density and hydrodynamic size. However, since EVs are very small, extremely high centrifugal forces (100,000–120,000 × g) over extended time periods are required to pellet EVs, and successive UC steps (as shown in Fig. 3) are required to obtain sub-populations [5]. Following UC, EVs may be further purified by density gradient floatation (DGF), which removes non-membranous particles using a gradient of density solution. However, the high sucrose concentrations can damage EV integrity [5].
Ultracentrifugation protocol for isolating EVs from body fluid or conditioned medium, taking several hours. Illustration inspired by [4]
Ultracentrifugation is a flexible technique and is available in most medical research labs. However, adding UC steps adds hours to the processing time, is labour intensive, requires relatively large sample volumes, has modest and variable recovery and is far from point of care which limits its practical use in diagnostics. Additionally, high-speed centrifugation may induce EV coalescence, leading to erroneous conclusions regarding EV size, concentration and phenotype [6].
Precipitation
To overcome the time limitation of ultracentrifugation, many kinds of precipitation methods have been developed. These involve additives which speed up the pelleting of EVs such as polymers [4], beads and antibodies. There are many commercialised kits including the Urine Exosome RNA Isolation Kit (NORGEN Biotek Corp., Thorold, ON, Canada), Total Exosome Isolation Solution (ThermoFisher, Waltham, MA, USA), Exoquick-TC (System Biosciences, Palo Alto, CA, USA) and RIBO™ Exosome Isolation Reagent (RIBO Guangzhou, China). These tend to require a several-hour incubation followed by a low-speed ultracentrifugation, so an advantage is that they are not particularly labour intensive [5]. Although these methods have medium–high recovery, the purity may be reduced by additives [3] and co-isolated lipoproteins [5]. Comparative studies have found variable performance between kits and depending on the biofluid [7, 8], and the International Society for Extracellular Vesicles has cautioned against their use [3].
Size-exclusion chromatography
Size-exclusion chromatography (SEC) has been cited as the gold standard of the last decade [9]. SEC has some significant advantages over ultracentrifugation, such as processing smaller volumes with fewer manual handling errors. Relying on chromatography principles, different species exhibit predictably different elution times from a column, which is biassed towards certain physical and biochemical properties. SEC columns have been designed to have EVs of particular size ranges coming out into discreet fractions. In qEV products (IZON Science LTD, New Zealand), the user can choose a column which is biassed towards 35-nm or 70-nm EVs.
The SEC columns can take under 15 min to isolate EVs with intermediate recovery and specificity [3]. Consistent, standardisable results can make it preferable to UC techniques. SEC is also preferable to precipitation techniques due to lower abundance of contaminating proteins [9]. However, the devices are bulky and expensive with disposable columns. The sample volume must suit the column and you need to know what size EVs you are aiming for, so SEC is sub-optimal for many applications and risks skewed results. EVs risk getting stuck to the low-molecular-weight filters in the device, and if a large force is applied, it could damage larger vesicles or platelets [5].
Microfluidic isolation techniques
With escalating biomedical EV research, there is a need for separation methods which are reliable, fast, affordable, automated, high yield and high purity and can collect specific subsets of vesicles. Microfluidics is a field of engineering which typically handles fluid volumes in the order of microlitres. There are many reasons why scaling down in this way is advantageous for isolating small particles. Firstly, it creates the opportunity to perform diagnostics with scarce biofluids from animals, patients and cell cultures. Secondly, the deterministic fluid handling in microfluidic systems allows for superior control of the sample and intrinsic reproducibility. The separation of particles in microfluidic systems can be predicted due to the laminar flow profiles where a difference in size results in different displacement.
Ideally, a standardised microfluidic system will be developed to handle any biological sample, no matter the volume, density or concentration of both vesicles and soluble proteins. Although microfluidic devices still have obstacles to overcome, they have advanced the field of EV isolation from smaller sample volumes and a range of biofluids. In the following discussion, we consider devices as ‘passive’ or ‘active’ if external forces are required and we discuss the diverse advantages and limitations within these groups. Comparing the devices is difficult since purity, throughput, recovery and the analytical techniques used to quantify performance vary. Nevertheless, this report aims to advise on the usefulness of techniques in different applications and inspire the development of the next generation of microfluidic EV isolation methods.
Immunoaffinity-based techniques
In microfluidic isolation of EVs, antibodies may be used as a tool to adhere an EV with a complementary target to a surface or particle (for example magnetic or polystyrene beads). CD63, CD9 and CD81 are tetraspanins widely accepted as EV biomarkers, which allow immuno-selective isolation and enrichment of EVs. EVs can also be targeted based on markers from their parent cell for more specific isolation dependent on the cellular origin. Markers that are commonly targeted in such a way include epidermal growth factor receptor (EGFR) and epithelial cellular adhesion molecule (EpCAM) [10].
Immunoaffinity capture (IC) in microfluidics-based devices [10,11,12,13,14] falls into two categories: functionalised surfaces or functionalised beads in a suspension. Figure 4 summarises common configurations used in EV isolation. Figure 4a illustrates how an EV can be retained at a surface when that surface has been functionalised with appropriate antibodies for the target EV biomarkers, as demonstrated in 2010 by Chen et al. [11]. Similarly, the surface of a particle can be functionalised, as illustrated in Fig. 4b, then manipulated after capture to recover EVs [13]. Early approaches relied on biotin-avidin conjugation, which makes the binding irreversible under physiological conditions. However, Lo et al. demonstrated that desthiobiotin has a lower binding affinity than biotin and can be used in EV isolation, after which it can be replaced by biotin in a competitive binding step to release the EVs [10]; see Fig. 4c.
Schematic of three different iterations of immunoaffinity-based isolation devices, where a targeted EV is assumed to possess the surface marker for the complementary antibody. a A functionalised surface, b a functionalised bead and c an example of more complex functionalisation to also allow EV release
Following isolation and enrichment of EVs, antibodies can be utilised for analysis by ELISAs, fluorescence or lysing prior to analysis of proteins and nucleic acids. The potential for on-chip quantification makes these techniques flexible and highly desirable for diagnostics [15]. However, the highly selective isolation of EVs has the downside that EVs without a target marker are lost and so recovery is variable. There is also a risk of erroneous conclusions from analysis unless studies include IgG controls and to account for non-specific protein/lipid corona [16]. Since EV concentration and biomarkers can vary hugely, IC methods should be complemented with those allowing separation by physical properties like size and charge, as addressed by the other techniques.
Passive devices
The following section will highlight passive devices for extracellular vesicle separation, where separation can be achieved by smart design to influence microfluidic/nanoparticle interactions. Such devices only require flow control and no external force fields or user interfaces, making them attractive in point-of-care applications. However, many of these require slow flow rates and/or complex fabrication.
Mechanical filtering with micro- and nanostructures
Traditionally, filtering uses a porous mechanical barrier to separate larger particles from smaller ones in a fluid. Using micro- or nano-scale devices, vesicle-sized particles can be separated. Clogging is a major risk with filters, especially for biological samples which are adhesive and contain particles which vary in size by several orders or magnitudes. The risk can be mitigated by designs letting large particles through or using sequential filters.
A common way of realising a microfluidic EV filter is to use a series of membranes with nanometre-sized pores, known as nanoporous membranes, with different pore sizes to fractionate particles by size. An example is the exosome total isolation chip (ExoTIC) [17], which is a device that separates small EVs (see Fig. 5). A biofluid is prefiltered (< 220 nm) to remove larger debris before it is run through the nanoporous membrane (30–200 nm), thus enriching EVs via sequential filtering. Downstream analysis can be done after EVs are washed off the membrane. A 5–10-mL sample was processed under 3 h, with 90% capture efficiency of small EVs. Liang et al. [18] demonstrated the integration of a nanoporous membrane device with on-chip ELISA to confirm isolation of exosomes with CD63.
The ExoTIC device. a EVs can be isolated from various biofluids. b The EV suspensions are passed through a nanoporous membrane. Free protein and nucleic acids can pass through the membrane, whilst EVs cannot. Adapted with permission from [17]. Copyright 2017 American Chemical Society
EV separation with nanoporous membranes can be sped up with centrifugal forces in the ExoDisc [19]; see Fig. 6. A double filtration mechanism, along with wash and waste chambers, is fitted inside a spinning disc, which controls the fluid flow. The ExoDisc was able to process a sample in 30 min for exosome isolation, and 1 h if combined with on-chip ELISA. EVs are only exposed to a centrifugal force of 500 × g, much lower than in UC.
The ExoDisc device. a Schematic of the spinning disc with sample, waste and collection chambers as well as the two filters shown in (b). Sequential filtering of EVs from big particles and proteins. c Image of the device, which has two identical units allowing parallel processing. d SEM images of the nanoporous membranes in each filter. Adapted with permission from [19]. Copyright 2017 American Chemical Society
Filters that probe particles in the size range of EVs can also be made using patterns of micro- and nanostructures. Wang et al. [20] created a pattern of ciliated micropillars that functions as a filter (see Fig. 7) where exosome-sized particles are small enough to enter between the pillars into the finer mesh created by the cilia. Proteins in the solution are washed away as they are too small to be caught in the cilia, whilst the pillar spacing blocks cells and debris from entering between the pillars.
Ciliated micropillars for EV isolation. The spacing of the pillars filters out larger particles. The spacing of the cilia allows for capture of EVs, whilst letting free protein through. a–c SEM images of the micropillars. Reproduced from [20] with permission from the Royal Society of Chemistry
Yeh et al. [21] printed patches of carbon nanotubes with matching spacing; see Fig. 8. The herringbone structure enhances mixing, and it was possible to run at flow rates of 5–1000 μL/min with capture efficiencies ranging from 10 to 55%. However, the EVs were not eluted from the structures, but instead, cells were grown on top of the patches to study cellular EV uptake. This makes the device unsuitable for isolation of EVs for other downstream analysis methods.
a Schematic of patches of carbon nanotubes for capture of EVs. b SEM images of the arrays, where the intertubular distance allows for capture of differently sized EVs. Reprinted with permission from [21]. Copyright 2020 American Chemical Society
Functionalised surfaces
There are many examples of simple microfluidic devices which have incorporated antibodies as functionalised surface coatings to allow selective isolation of EVs; whilst functionalisation requires antibodies and time, only small volumes need to be used. In passive devices using antibodies, microfluidics can be designed to enhance mixing and allow automated washing not possible with traditional techniques.
The pioneering work of Chen et al. [11] demonstrated the capture of EVs from serum using an anti-CD63 functionalised microchannel. The device handled 10–400 μL of sample at 16 μL/min; however, the functionalisation step took more than 2 h [11]. The EVs were then either visualised by SEM or lysed for RNA analysis, with 42–92% isolation efficiency.
The sensitivity of IC surface devices can be improved with nanostructures. Increasing surface area increases the chance of EV interaction and isolation. Zhang et al. [14] demonstrated a limit of detection of 50 exosomes/mL by integrating a graphene oxide/polydopamine nano-interface, with low non-specific protein absorption.
Yang et al. [22] demonstrated a nanoporous membrane coated with gold nanoparticles conjugated with anti-CD63 antibodies; see Fig. 9. The device was able to process 5 mL of urine in 30 min, yielding around 5 × 109 particles. Another filtration device combined with aptamers that bind to CD63 was developed by Dong et al. [23]. This device has the benefit of being able to work with small sample volumes and a low limit of detection (8.9 × 103 EVs per mL). Combined with fluorescence detection of EVs, the processing time of 20 μL of sample was 2 h.
Functionalised nanoporous membrane for specific isolation and detection of exosomes. a Design of the device. b Schematic illustration of the steps in the in-situ detection of an exosome. c Image of the integrative microfluidic device. d SEM image of Au nanoparticles deposited on anodic aluminium oxide membrane with a thickness of 50 nm, with e the side view of Au coating. f SEM image of the captured exosomes on the membrane, and g SEM image of the formed complex containing exosomes bound to Au nanoclusters and nanorods. Reprinted from [22], Copyright 2013, with permission from Elsevier
Wang et al. [24] demonstrated isolation of exosomes using an array of functionalised PDMS micropillars; see Fig. 10. Later, Kamyabi et al. [25] used coated pillars for tumour-derived EV isolation and subsequent DNA analysis, utilising a zigzag pattern to increase the interaction between the pillars and the EVs; see Fig. 11. They were able to process 2 mL of plasma in 1.5 h, yielding 2–14 ng of DNA.
Array of functionalised PDMS micropillars. a Schematic of the micropillar array and the process for functionalisation of the pillars. b SEM images of the device. c SEM images of captured EVs. d Fluorescent three-dimensional image of the device stained with avidin-FITC. Scale bar, 50 μm. Reprinted with permission from [24]. Copyright 2017 American Chemical Society
Functionalised micropillars in a zigzag pattern for enhanced interaction between the pillars and the EVs. a Schematic of the device, including a SEM image of the pillars. The device contains approximately 100,000 pillars. b Picture of the device, with a penny for size comparison. c Simulation of the flow in the device. d Schematic of the coating layers. Reprinted by permission from [25], Springer Nature, Biomedical Microdevices, Copyright 2020
For devices with optimised specificity, the detection can be incorporated into the device. ExoChip is an IC device developed with on-chip fluorescence imaging, which uses expanding and contracting microchannels to enhance mixing rather than the herringbone structure used by Chen et al. Using the ExoChip, EVs in a 400-μL sample were captured at 8 μL/min and enabled the detection of 15–18 μg of total proteins and 10–15 ng of nucleic acids [12].
More recently, specialised sequential reagent steps have been utilised to allow triggered release of EVs from the surface, which makes downstream analysis possible. This device could process 1.2 mL of plasma or 10 mL of cell culture medium in an hour. The capture efficiency decreased for flow rates above 10 mL/h, and a lower throughput for higher viscosity medium was observed, due to reduced binding of antibody to antigens under high shear stress. This device is one of the few IC techniques which allows further study of intact EVs via nanoparticle tracking analysis (NTA) as well as studying the uptake of isolated EVs in cancer cells [10].
In summary, IC-based approaches can offer specificity in EV isolation and increase purity. However, it adds complexity to device fabrication and will only isolate EVs that express the targeted surface marker, which may bias downstream analysis.
Hydrodynamic focusing
Hydrodynamic focusing is arguably the simplest class of microfluidic separation techniques. Without external fields or extensive fabrication, deterministic fluid flow is used to separate particles by size. Pinch-flow fractionation with a magnification flow channel (see Fig. 12) has separated apoptotic bodies from EVs in cell media, in 25 min (at 200 μL/min). However, all particles below 200 nm were co-isolated [26].
Schematic of pinched-flow fractionation. Adapted with permission from [26], Copyright 2017, the authors
Asymmetric-flow field-flow fractionation (sometimes called AF4 or AsFlFFF) combines cross-flow with parabolic channel flow, as shown in Fig. 13. Particles are separated by size due to either their diffusion coefficient (normal mode) or their physical size (steric mode). This technique is rapid, highly reproducible and can mimic physiological conditions, unlike density gradient flotation (DGF) and other manual techniques [27].
Schematic of AsFlFFF stages. a The sample is injected and focused between the two opposing flows (parabolic channel flow and reverse flow) in the channel. In the elution stages, the parabolic channel from inlet to outlet caused the sequential elution of particles of different sizes. b The particles reach heights depending on their diffusion coefficient (normal mode). c For larger particles, diffusion is negligible and their position in the channel depends on physical size (steric mode). Reprinted by permission from [27], Springer Nature, Nature Protocols, Copyright 2019
Multia et al. [28] developed an on-line immunoaffinity chromatography coupled with an asymmetric-flow field-flow fractionation device, where anti-CD61 and anti-CD9 were used to selectively fractionate platelet-derived EVs from those originating from multivesicular bodies. As shown in Fig. 14, this involved a sample preparation section, immunoaffinity column, the AsFlFFF itself and multiplexed detection and analysis. The microfluidic channel separated three EV size ranges: < 50 nm, 50–80 nm and 80–120 nm [28]. For 5 mL of sample, the immunoaffinity stage took 51 min and the AsFlFFF subpopulation took 40 min.
Schematic of an on-line coupled immunoaffinity chromatography-asymmetric-flow field-flow fractionation system for analysis of nano-sized biomolecules from plasma. The system is comprised of a a monolithic column for immunoaffinity chromatography, b an automated six port valve for injection to AsFlFFF, c AsFlFFF with ultraviolet, multiangle light-scattering, dynamic light-scattering, and diode array detectors, and d a fraction collector. Figure reprinted from [28]
Deterministic lateral displacement
Deterministic lateral displacement (DLD) is a microfluidic technique utilising laminar flow and bifurcations through a periodic array of obstacles, to enable predictable migration of particles. Huang et al. [29] designed a silicon chip which was able to spatially separate sub-micron particles (see Fig. 15). Particles smaller than the critical radius follow their stream path throughout the DLD array, whereas particles are displaced to the neighbouring stream by an obstacle if they are larger than the width of the stream path.
a Micrometre-scale obstacle array, where each row is shifted horizontally by \(\frac{\lambda }{2}\), fluid flow direction shown in orange. b Fluid emerging from the gap in three parallel streams (red, yellow and blue). The first row’s lane 1 becomes lane 3 in the second row, which then becomes lane 2 in the third row of obstacles. c A particle follows the streamline, staying in the same lane (indicated by the black dot) and so is physically displaced at each row of obstacles. Illustration from [29]. Reprinted with permission from AAAS
The nano-DLD developed by Wunsch et al. [30], illustrated in Fig. 16, is an array of 25–235-nm separated pillars allowing separation of 110 nm from 20-nm colloids. When operated under continuous flow of 0.1–0.2 nL/min, human-urine-derived exosomes were separated into > 100-nm EVs in a bumped fraction and 20–100-nm EVs from the zigzag and partially bumped fractions. The sample took 30 min to reach the array, and the sample recovery was < 10 μL of small EVs and < 1 μL of large EVs. Smith et al. scaled up this technique in a massively parallel nano-DLD device with a total of 1.44 billion pillars per chip [31]. This enabled significantly higher throughput, and the device was able to isolate EVs from serum and urine at a flow rate of 15 μL/min, at a driving pressure of 1 MPa.
a Schematic of a DLD pillar array where particle trajectories follow a laminar flow in either zigzag mode (red) or bumping mode (blue). Only particles above a critical diameter will be displaced at the maximum angle by the bumping mode. b Scanning electron microscope image of the sorting array with separation 25 nm and row-to-row shift of 400 nm. c Microscopy images showing the device sections and continuous separation of 50-nm (yellow) and 110-nm (blue) beads, where the larger beads have been displaced to the right. Reprinted by permission from [30], Springer Nature, Nature Nanotechnology, Copyright 2016
DLD has the advantage of being continuous flow and label-free; however, there are many practical disadvantages with this technique when used for nano-scale particle separation. DLD typically requires high operating pressure and gives modest throughput. Fabricating these devices is particularly challenging and costly, increasingly so as throughput is increased. Additionally, clogging can be an issue with these devices.
Viscoelastic separation
Viscoelastic separation devices are passive and utilise non-Newtonian fluids as described by Yuan et al. [32]. The principle is that the shear-thinning polymer-containing media induces an elastic force on nano-sized particles, pushing them towards the centre. A size-dependant equilibrium point is reached, and larger particles move closer to the wall due to the shear-gradient-induced lift force [33]. An early application of this technique used a cylindrical channel of non-Newtonian fluid to create a Lagrangian trap where the elastic forces migrate the nanoparticles laterally despite the opposition of Brownian motion and drag forces [33]. Similarly, albeit using sheath flow, Lui et al. [34] were able to separate large extracellular vesicles from exosomes, as the elastic force scaled to the second order with the particle diameter. Alternatively, a co-flow creating a Newtonian and viscoelastic interface utilised competition between interfacial elastic lift force and inertial lift force to drive selective migration from a biological sample into laminated viscoelastic fluid [35].
A novel oscillatory viscoelastic device enhanced these devices by superimposing an oscillatory flow on a unidirectional flow, allowing equilibrium positions to settle in a shorter channel [36]. This device was only 4 mm long but was able to focus EVs in 20 s by rapidly oscillating the flow, thereby increasing the effective travel distance. Small EVs (122 nm mean diameter) were isolated from a mixture containing milk fat globules (1–2 μm) (Fig. 17) with 67% efficiency using oscillation frequency 2 Hz and 4 bar. Although this shows great promise, the fluid properties are critical to device performance so more research may be required before this can be used to isolate EVs directly from biofluids.
Schematic of the oscillatory viscoelastic separation principle. Pressures P1 and P2 oscillate the viscoelastic microfluidic system and result in size-dependent migration of particles. Milk fat globules > 1 μm (red) were pushed towards the walls, and small EVs < 120 nm (green) were focused towards the centreline. Reprinted with permission from [36]. Copyright 2020 American Chemical Society
Active devices
Active microfluidic devices involve external forces such as magnetic, electric or ultrasonic fields to drive separation with a low risk of clogging. Devices still incorporate hydrodynamic forces, inertial forces and diffusion; however, innovative techniques can allow particles to be separated by more than just hydrodynamic size and immunoaffinity.
Acoustophoresis
Acoustophoresis can be used to manipulate particles in a microfluidic system through primary radiation forces and scattered sound interactions. Acoustophoresis is a gentle way of isolating, enriching and washing particles and vesicles without labelling, which makes it suitable for biological samples. Devices utilising acoustic waves use either bulk acoustic wave (BAW) or surface acoustic wave (SAW) actuation. In BAW devices, a transducer vibrates the whole microchip at the channel’s resonant frequency, giving rise to a standing wave. In SAW devices, interdigital transducers (IDTs) generate acoustic waves that travel along a surface and couple into the fluid-filled channel.
SAW devices tend to operate at higher frequencies than BAW devices; this causes to a stronger radiation force able to isolate EVs in continuous flow. However, BAW devices have intrinsically higher acoustic energy densities which typically offers higher throughput.
Acoustic trapping is a technique for retaining particles in an acoustic field. In acoustic trapping with BAW actuation, a strong localised standing wave in a channel results in a stationary pressure node, where the primary radiation force can retain microparticles against flow. It is possible to trap nanoparticles by utilising scattered sound interactions from larger, preloaded seed particles [37]; see Fig. 18. The AcouTrap instrument (AcouSort AB, Lund, Sweden) has used this method to trap, enrich and wash EV from blood plasma [38,39,40,41], conditioned media [39] and urine [39, 42]. Acoustic traps will trap all particles that have a positive contrast factor, that is, more dense and less compressible than the surrounding medium. Once particles are acoustically trapped, it is easy to perform washes and buffer exchanges. A typical acoustic trap generates a single pressure node in the centre of the channel, Fig. 19A, trapping particles against a flow rate of 10–30 μL/min. A larger acoustic trapping channel has recently been developed to generate multiple pressure nodes, Fig. 19B, which enabled enrichment and washing of EVs at 500 μL/min. Several millilitres of urine was processed and yielded sufficient protein for subsequent EV proteome profiling using mass spectrometry [43].
a Procedure for acoustic seed particle trapping of EVs. Seed particles are loaded in the acoustic field. EVs are caught in the seed particle cluster through scattered sound interactions. Following a wash, the particle cluster can be eluted by turning off the sound. Adapted with permission from [39]. Copyright 2018 American Chemical Society. b Images of particle trapping in an acoustic trap. Fluorescently (red) labelled vesicles are enriched in the seed particle cluster. Adapted with permission from [41]. Copyright 2016 American Chemical Society
a Schematic and image of particle trapping in a single-node acoustic trap. Fluorescently (green) labelled particles are retained in a single cluster in the centre of the channel. Adapted and reproduced from [37] with permission from the Royal Society of Chemistry. b Schematic and image of particle trapping in a multi-node acoustic trap. Fluorescently (green) labelled particles are retained in multiple distinct clusters along the height direction of the channel, corresponding to the pressure nodes in the standing wave. Figure adapted and reprinted from [43]
Acoustic trapping can also be performed with SAW actuation. A packed bed of seed particles confined with micropillar posts can be actuated by two opposing IDTs at the resonance frequency of the seed particles [44]. The scattered sound interaction between the seed particles and the nanoparticles causes the nanoparticles to aggregate in the packed bed, retaining them against flow; see Fig. 20. Habibi et al. [45] utilised these sound wave–activated nano-sieves (SWANS) to trap small EVs from cell culture supernatant at a flow rate of 0.1 μL/min.
a Sound wave–activated nano-sieve illustration and b the corresponding process for trapping and release. Particles in a packed bed are actuated with surface acoustic waves at the particle resonance frequency. Scattered sound interactions allow for nanoparticle enrichment in the packed bed. The nanoparticles can be released by turning off the SAW. Reproduced from [44] with permission from the Royal Society of Chemistry
Standing surface acoustic waves (SSAW) use opposing interdigitated transducers (IDTs) that generate a standing wave inside a channel. Microparticles move towards the pressure nodes at different speeds depending on their size, such that they can be deflected to different flow lines. Lee et al. [46] used this technique, under a continuous flow of 1 μL/min, to remove larger particles from a mixture, leaving a fraction of smaller particles in the original flow path, Fig. 21.
a SSAW device for EV separation. Two opposing IDTs generate a standing wave inside a fluidic channel. b Particles move towards the pressure nodes at different rates, depending on their size, allowing for separation of differently sized EVs. Reprinted with permission from [46]. Copyright 2015 American Chemical Society
The tilted angle standing surface acoustic wave (taSSAW) is similar to SSAW, but its two opposing IDTs are tilted in relation to the fluidic channel. This results in angled pressure nodal planes in the channel which is used to deflect larger particles (experiencing a sufficiently large acoustic radiation force) from their streamlines as the Stokes’ drag force pushes them along the nodal planes. Wu et al. [47] developed a two-step purification taSSAW chip, shown in Fig. 22, through which large and small EVs could be separated from whole blood at a flow rate of 4 μL/min. However, the small EV fraction still contained plasma components and both fractions were significantly diluted by the sheath flow.
taSSAW device for separation of EVs and blood components. Particles will follow the tilted angle of the standing wave, deflecting them into other streamlines and allowing separation based on size. a Schematic of the device. Larger cell components are removed from whole blood in a first separation step, leaving EVs in plasma. b Image of the device. c In a second separation step, large EVs are separated from smaller EVs, generating one fraction containing small EVs and one containing large EVs. Figure reprinted from [47]
Whilst acoustic trapping enables washing, in SSAW and taSSAW, smaller vesicles will still be in their initial buffer (plasma or cell culture media) without removing background proteins. SSAW techniques sort particles by deflecting away the larger particles with radiation forces which do not affect small vesicles directly and are therefore not suited for enriching smaller EVs for protein analysis.
Magnetophoresis
Most magnetophoresis techniques used to isolate EVs exploit IC via magnetic beads, as shown in Fig. 23. Magnetic fields can enrich the beads surrounded by captured EVs more easily than with functionalised surfaces. Nanoparticles can search the sample volume very efficiently and have a large functional surface area which speeds up incubation time.
a Schematic of EV isolation with an immunomagnetic bead. b, c Images of an immunomagnetic bead with bound EVs and a cross-sectional TEM image of it. Images reprinted from [13]. d, e SEM images of a surface-imprinted magnetic nanoparticle before and after EV capture. Adapted with permission from [48]. Copyright 2021 American Chemical Society
The ExoSearch chip was developed to facilitate the isolation of EVs with immunomagnetic beads from as little as 20 μL of plasma in 40 min [13]. The device was better than ultracentrifugation at isolating small EVs (80% compared to 61% of EVs were below 150 nm). The continuous flow mixing with slow flow rates (1 μL/min) means that isolated EVs are more likely to be intact than with UC [13].
In 2016, MagCapture Exosome Isolation Kit PS was commercialised. This kit utilised Tim4 activated magnetic beads that bind to phosphatidylserine displayed on the EV surface [49]. More recently, Fe3O4–EDC-NHS-NPs:anti-CD9 was found to be particularly stable and sensitive for EV isolation performed on a microfluidic device which could handle 500 μL of whole blood at a flow rate of 50 μL/min [50]. Yang et al. have developed artificial magnetic colloid antibodies which are not immune-based but utilise a surface-imprinting method to form a recognition layer onto a magnetic nanoparticle [48]. These highly specific beads allowed 90% EV capture efficiency after 20 min of incubation (Fig. 23d, e).
More sophisticated microfluidic systems with integrated measurement include fluorescent [51] or digital [52] readouts. Lui et al. presented the digital droplet ExoELISA system (see Fig. 24) which confined a single exosome per droplet with a fluorescent enzymatic reporter and could detect 5–40,000 exosomes/μL [51]. Jeong et al. developed an integrated magnetic-electrochemical exosome platform (iMEX) where the magnetic beads in 8 channels were enriched at the electrodes with a detection limit of 3 × 104 EVs from 10 μL of sample (compared with a standard ELISA protocol ~ 107 EVs) [52].
Schematic of droplet digital ExoELISA. a Magnetic bead bound to an EV via an immunocomplex, b microdroplet co-encapsulation, c microfluidic chip and d fluorescent readout. Reprinted with permission from [51]. Copyright 2018 American Chemical Society
A major limitation of these magnetic bead devices is that they require optimisation of the beads, functionalisation and incubation time. As with other immunoaffinity-capture-based techniques, this is limited by the performance of the antibody labelling and can only isolate EVs with those targets.
An alternative magnetophoresis method, ferrohydrodynamic separation (see Fig. 25), does not require EVs to bind to beads. By inducing a magnetic flux density gradient in a viscoelastic ferrofluid, diamagnetic particles experience a ferrohydrodynamic force proportional to their volume. Lui et al. used their FerroChip to separate EVs by size with a throughput of 1–3 μL/min [53]. Smaller EVs (~ 200 nm) were separated from larger EVs (~ 1000 nm) with 94.3% and 87.9% purity respectively.
a Schematic of a microfluidic channel allowing separation of small (green) and large (red) non-magnetic particles by magnetophoretic force. b Corresponding numerical modelling of the particle separation in a non-uniform magnetic field generated by a permanent magnet. Reproduced from [54] with permission from the Royal Society of Chemistry
Dielectrophoresis
In addition to acoustic and magnetic forces, EVs can also be manipulated and isolated using electric fields. One such common technique is dielectrophoresis (DEP), wherein dielectric particles are polarised by an electric field gradient and then migrate either to the field minimum or maximum depending on the dielectric constants of the particle and the medium [55]. Chen et al. [56] demonstrated separation of exosomes from breast cancer cells and breast milk based on differences in membrane capacitance. Marczak et al. employed an electric field to direct EVs through a porous gel towards a cation-selective membrane, where they were enriched [57]; see Fig. 26. The device reportedly allowed approximately 70% isolation efficiency of small EVs at a flow rate of 3 μL/min. Larger EVs had lower isolation efficiency, perhaps due to the sieving effect of the gel or their lower mobility in the electric field [57].
Dielectrophoretic isolation and enrichment of exosomes. a A solution containing purified exosomes is run through a microfluidic DEP device. b Exosomes are isolated in a gel with a pore size of 220 nm, stopping large particles from migrating into the gel region. The exosomes cannot pass the ion-selective membrane and are therefore enriched on one side of the membrane. Reprinted with permission from [57]. Copyright 2018 John Wiley and Sons
Insulator-based dielectrophoresis (iDEP) introduces arrays of insulator posts between which the high electric field gradient can retain particles. Figure 27 shows how the spacing between posts has been used to separate purified exosomes into two population diameters of 113 ± 10 nm and 73 ± 9 nm [58]. One advantage of this system is that it is driven by electroosmotic flow, so it does not require syringe pumps. However, this device is unsuitable for samples containing cell debris because the small gaps may get blocked.
Size-dependent isolation of exosomes using dielectrophoresis with arrays of insulating posts. Reprinted with permission from [58]. Copyright 2019 American Chemical Society
Conclusions
Compared to conventional methods, microfluidic techniques in general allow for processing of smaller sample volumes. Additionally, they can allow for higher recovery and isolation of specific subtypes of EVs with fewer non-vesicular co-isolates, reducing background interference in subsequent biomarker analysis steps. Microfluidic devices vary widely in performance of EV isolation, as summarised in Table 1. Therefore, it is important to consider the requirements for downstream analysis and applications when choosing an isolation method. In addition to maximising throughput, recovery and purity, one must consider other factors such as capacity, sample volume, enrichment, co-isolates and potential for clogging. Furthermore, immunoaffinity-based techniques require expensive antibodies. Many microfluidic techniques require complex chip fabrication, yet if standardised, they could offer better reproducibility. Microfluidic isolation methods show great promise, with some commercial systems already available and improvements and new techniques being reported at a rapid pace.
Several patient cohorts have been included in studies with microfluidics-based isolation of EVs from cancer patients such as those with ovarian [13, 48, 60], prostate [61], breast [62], pancreatic [63], lung [22], bladder [18, 19] and human papillomavirus–associated oropharyngeal [64] cancers. Clinically characterised patient cohorts of 40–220 patients have also been studied with a focus on cardiovascular disease [65,66,67]. However, diagnostic failures [59] are still an issue within this developing field.
Abbreviations
- AsFlFFF:
-
Asymmetric-flow field-flow fractionation
- BAW:
-
Bulk acoustic wave
- DC:
-
Direct current
- DEP:
-
Dielectrophoresis
- DGF:
-
Density gradient floatation
- DLD:
-
Deterministic lateral displacement
- ELISA:
-
Enzyme-linked immunosorbent assay
- EV:
-
Extracellular vesicle
- FFF:
-
Field-flow fractionation
- IC:
-
Immunoaffinity capture
- IDT:
-
Interdigitated transducer
- NTA:
-
Nanoparticle tracking analysis
- PDMS:
-
Polydimethylsiloxane
- PEG:
-
Polyethylene glycol
- PEO:
-
Polyethylene oxide
- SAW:
-
Surface acoustic wave
- SEC:
-
Size-exclusion chromatography
- SEM:
-
Scanning electron microscopy
- SSAW:
-
Standing surface acoustic wave
- taSSAW:
-
Tilted angle standing surface acoustic wave
- TEM:
-
Transmission electron microscopy
- UC:
-
Ultracentrifugation
References
Schimpf ME, Caldwell K, Giddings JC. Field-flow fractionation handbook: John Wiley & Sons; 2000.
Giddings JC. Field-flow fractionation: analysis of macromolecular, colloidal, and particulate materials. Science (1979). 1993;260(5113):1456–65.
Théry C, Witwer KW, Aikawa E, Jose Alcaraz M, Anderson JD, Andriantsitohaina R, et al. Minimal information for studies of extracellular vesicles 2018 (MISEV2018): a position statement of the International Society for Extracellular Vesicles and update of the MISEV2014 guidelines. J Extracell Vesicles. 2018;7(1535750):1–43.
Alzahrani FA, Saadeldin IM. Role of exosomes in biological communication systems. Role of exosomes in biological communication systems. Singapore: Springer; 2021.
Witwer KW, Buzás EI, Bemis LT, Bora A, Lässer C, Lötvall J, et al. Standardization of sample collection, isolation and analysis methods in extracellular vesicle research. J Extracell Vesicles. 2013;2(1).
Linares R, Tan S, Gounou C, Arraud N, Brisson AR. High-speed centrifugation induces aggregation of extracellular vesicles. J Extracell Vesicles. 2015;4(1):29509.
Ding M, Wang C, Lu X, Zhang C, Zhou Z, Chen X, et al. Comparison of commercial exosome isolation kits for circulating exosomal microRNA profiling. Anal Bioanal Chem. 2018;410(16):3805–14.
Royo F, Diwan I, Tackett MR, Zuñiga P, Sanchez-Mosquera P, Loizaga-Iriarte A, et al. Comparative miRNA analysis of urine extracellular vesicles isolated through five different methods. Cancers (Basel). 2016;8(12).
Gámez-Valero A, Monguió-Tortajada M, Carreras-Planella L, Franquesa M, Beyer K, Borràs FE. Size-exclusion chromatography-based isolation minimally alters extracellular vesicles’ characteristics compared to precipitating agents. Sci Rep. 2016;6.
Lo TW, Zhu Z, Purcell E, Watza D, Wang J, Kang YT, et al. Microfluidic device for high-throughput affinity-based isolation of extracellular vesicles. Lab Chip. 2020;20(10):1762–70.
Chen C, Skog J, Hsu CH, Lessard RT, Balaj L, Wurdinger T, et al. Microfluidic isolation and transcriptome analysis of serum microvesicles. Lab Chip. 2010;10(4):505–11.
Kanwar SS, Dunlay CJ, Simeone DM, Nagrath S. Microfluidic device (ExoChip) for on-chip isolation, quantification and characterization of circulating exosomes. Lab Chip. 2014;14(11):1891–900.
Zhao Z, Yang Y, Zeng Y, He M. A microfluidic ExoSearch chip for multiplexed exosome detection towards blood-based ovarian cancer diagnosis. Lab Chip. 2016;16(3):489–96.
Zhang P, He M, Zeng Y. Ultrasensitive microfluidic analysis of circulating exosomes using a nanostructured graphene oxide/polydopamine coating. Lab Chip. 2016;16(16):3033–42.
Ko J, Carpenter E, Issadore D. Detection and isolation of circulating exosomes and microvesicles for cancer monitoring and diagnostics using micro-/nano-based devices. Analyst. 2016;141(2):450–60.
Kopac T. Protein corona, understanding the nanoparticle–protein interactions and future perspectives: a critical review. Int J Biol Macromol. 2021;169:290–301.
Liu F, Vermesh O, Mani V, Ge TJ, Madsen SJ, Sabour A, et al. The exosome total isolation chip. ACS Nano. 2017;11(11):10712–23.
Liang LG, Kong MQ, Zhou S, Sheng YF, Wang P, Yu T, et al. An integrated double-filtration microfluidic device for isolation, enrichment and quantification of urinary extracellular vesicles for detection of bladder cancer. Sci Rep. 2017;7(46224):1–10.
Woo HK, Sunkara V, Park J, Kim TH, Han JR, Kim CJ, et al. Exodisc for rapid, size-selective, and efficient isolation and analysis of nanoscale extracellular vesicles from biological samples. ACS Nano. 2017;11(2):1360–70.
Wang Z, Wu HJ, Fine D, Schmulen J, Hu Y, Godin B, et al. Ciliated micropillars for the microfluidic-based isolation of nanoscale lipid vesicles. Lab Chip. 2013;13(15):2879–82.
Yeh YT, Zhou Y, Zou D, Liu H, Yu H, Lu H, et al. Rapid size-based isolation of extracellular vesicles by three-dimensional carbon nanotube arrays. ACS Appl Mater Interfaces. 2020;12(11):13134–9.
Yang Q, Cheng L, Hu L, Lou D, Zhang T, Li J, et al. An integrative microfluidic device for isolation and ultrasensitive detection of lung cancer-specific exosomes from patient urine. Biosens Bioelectron. 2020;163.
Dong X, Chi J, Zheng L, Ma B, Li Z, Wang S, et al. Efficient isolation and sensitive quantification of extracellular vesicles based on an integrated ExoID-Chip using photonic crystals. Lab Chip. 2019;19(17):2897–904.
Wang J, Li W, Zhang L, Ban L, Chen P, Du W, et al. Chemically edited exosomes with dual ligand purified by microfluidic device for active targeted drug delivery to tumor cells. ACS Appl Mater Interfaces. 2017;9(33):27441–52.
Kamyabi N, Abbasgholizadeh R, Maitra A, Ardekani A, Biswal SL, Grande-Allen KJ. Isolation and mutational assessment of pancreatic cancer extracellular vesicles using a microfluidic platform. Biomed Microdevices. 2020;22(2).
Shin S, Han D, Park MC, Mun JY, Choi J, Chun H, et al. Separation of extracellular nanovesicles and apoptotic bodies from cancer cell culture broth using tunable microfluidic systems. Sci Rep. 2017;7(1).
Zhang H, Lyden D. Asymmetric-flow field-flow fractionation technology for exomere and small extracellular vesicle separation and characterization. Nat Protoc. 2019;14(4):1027–53.
Multia E, Liangsupree T, Jussila M, Ruiz-Jimenez J, Kemell M, Riekkola ML. Automated on-line isolation and fractionation system for nanosized biomacromolecules from human plasma. Anal Chem. 2020;92(19):13058–65.
Huang LR, Cox EC, Austin RH, Sturm JC. Continuous particle separation through deterministic lateral displacement. Science (1979). 2004;304(5673):983–7.
Wunsch BH, Smith JT, Gifford SM, Wang C, Brink M, Bruce RL, et al. Nanoscale lateral displacement arrays for the separation of exosomes and colloids down to 20nm. Nat Nanotechnol. 2016;11(11):936–40.
Smith JT, Wunsch BH, Dogra N, Ahsen ME, Lee K, Yadav KK, et al. Integrated nanoscale deterministic lateral displacement arrays for separation of extracellular vesicles from clinically-relevant volumes of biological samples. Lab Chip. 2018;18(24):3913–25.
Yuan D, Zhao Q, Yan S, Tang SY, Alici G, Zhang J, et al. Recent progress of particle migration in viscoelastic fluids. Lab Chip. 2018;18(4):551–67.
de Santo I, D’Avino G, Romeo G, Greco F, Netti PA, Maffettone PL. Microfluidic lagrangian trap for brownian particles: three-dimensional focusing down to the nanoscale. Phys Rev Appl. 2014;2(6).
Liu C, Guo J, Tian F, Yang N, Yan F, Ding Y, et al. Field-free isolation of exosomes from extracellular vesicles by microfluidic viscoelastic flows. ACS Nano. 2017;11(7):6968–76.
Tian F, Zhang W, Cai L, Li S, Hu G, Cong Y, et al. Microfluidic co-flow of Newtonian and viscoelastic fluids for high-resolution separation of microparticles. Lab Chip. 2017;17(18):3078–85.
Asghari M, Cao X, Mateescu B, van Leeuwen D, Aslan MK, Stavrakis S, et al. Oscillatory viscoelastic microfluidics for efficient focusing and separation of nanoscale species. ACS Nano. 2020;14(1):422–33.
Hammarström B, Laurell T, Nilsson J. Seed particle-enabled acoustic trapping of bacteria and nanoparticles in continuous flow systems. Lab Chip. 2012;12(21):4296–304.
Evander M, Gidlöf O, Olde B, Erlinge D, Laurell T. Non-contact acoustic capture of microparticles from small plasma volumes. Lab Chip. 2015;15(12):2588–96.
Ku A, Lim HC, Evander M, Lilja H, Laurell T, Scheding S, et al. Acoustic enrichment of extracellular vesicles from biological fluids. Anal Chem. 2018;90(13):8011–9.
Bryl-Górecka P, Sathanoori R, Al-Mashat M, Olde B, Jögi J, Evander M, et al. Effect of exercise on the plasma vesicular proteome: a methodological study comparing acoustic trapping and centrifugation. Lab Chip. 2018;18(20):3101–11.
Rezeli M, Gidlöf O, Evander M, Bryl-Górecka P, Sathanoori R, Gilje P, et al. Comparative proteomic analysis of extracellular vesicles isolated by acoustic trapping or differential centrifugation. Anal Chem. 2016;88(17):8577–86.
Ku A, Ravi N, Yang M, Evander M, Laurell T, Lilja H, et al. A urinary extracellular vesicle microRNA biomarker discovery pipeline; from automated extracellular vesicle enrichment by acoustic trapping to microRNA sequencing. PLoS One. 2019;14(5).
Broman A, Lenshof A, Evander M, Happonen L, Ku A, Malmström J, et al. Multinodal acoustic trapping enables high capacity and high throughput enrichment of extracellular vesicles and microparticles in miRNA and MS proteomics studies. Anal Chem. 2021;93:3929–37.
Habibi R, Neild A. Sound wave activated nano-sieve (SWANS) for enrichment of nanoparticles. Lab Chip. 2019;19(18):3032–44.
Habibi R, He V, Ghavamian S, de Marco A, Lee TH, Aguilar MI, et al. Exosome trapping and enrichment using a sound wave activated nano-sieve (SWANS). Lab Chip. 2020;20(19):3633–43.
Lee K, Shao H, Weissleder R, Lee H. Acoustic purification of extracellular microvesicles. ACS Nano. 2015;9(3):2321–7.
Wu M, Ouyang Y, Wang Z, Zhang R, Huang PH, Chen C, et al. Isolation of exosomes from whole blood by integrating acoustics and microfluidics. Proc Natl Acad Sci U S A. 2017;114(40):10584–9.
Yang J, Pan B, Zeng F, He B, Gao Y, Liu X, et al. Magnetic colloid antibodies accelerate small extracellular vesicles isolation for point-of-care diagnostics. Nano Lett. 2021;21(5):2001–9.
Nakai W, Yoshida T, Diez D, Miyatake Y, Nishibu T, Imawaka N, et al. A novel affinity-based method for the isolation of highly purified extracellular vesicles. Sci Rep. 2016;6(33935):1–11.
Sancho-Albero M, Sebastián V, Sesé J, Pazo-Cid R, Mendoza G, Arruebo M, et al. Isolation of exosomes from whole blood by a new microfluidic device: proof of concept application in the diagnosis and monitoring of pancreatic cancer. J Nanobiotechnol. 2020;18(1).
Liu C, Xu X, Li B, Situ B, Pan W, Hu Y, et al. Single-exosome-counting immunoassays for cancer diagnostics. Nano Lett. 2018;18(7):4226–32.
Jeong S, Park J, Pathania D, Castro CM, Weissleder R, Lee H. Integrated magneto-electrochemical sensor for exosome analysis. ACS Nano. 2016;10(2):1802–9.
Liu C, Zhao J, Tian F, Chang J, Zhang W, Sun J. λ-DNA- and aptamer-mediated sorting and analysis of extracellular vesicles. J Am Chem Soc. 2019;141(9):3817–21.
Zhang J, Yan S, Yuan D, Zhao Q, Tan SH, Nguyen NT, et al. A novel viscoelastic-based ferrofluid for continuous sheathless microfluidic separation of nonmagnetic microparticles. Lab Chip. 2016;16(20):3947–56.
Liu C, Feng Q, Sun J. Lipid Nanovesicles by Microfluidics: manipulation, synthesis, and drug delivery. Adv Mater. 2019;31(45).
Chen H, Yamakawa T, Inaba M, Nakano M, Suehiro J. Characterization of extra-cellular vesicle dielectrophoresis and estimation of its electric properties. Sensors. 2022;22(9).
Marczak S, Richards K, Ramshani Z, Smith E, Senapati S, Hill R, et al. Simultaneous isolation and preconcentration of exosomes by ion concentration polarization. Electrophoresis. 2018;39(15):2029–38.
Ayala-Mar S, Perez-Gonzalez VH, Mata-Gómez MA, Gallo-Villanueva RC, González-Valdez J. Electrokinetically driven exosome separation and concentration using dielectrophoretic-enhanced PDMS-based microfluidics. Anal Chem. 2019;91(23):14975–82.
Dao TNT, Kim MG, Koo B, Liu H, Jang YO, Lee HJ, et al. Chimeric nanocomposites for the rapid and simple isolation of urinary extracellular vesicles. J Extracell Vesicles. 2022;11(2).
Dorayappan KDP, Gardner ML, Hisey CL, Zingarelli RA, Smith BQ, Lightfoot MDS, et al. A microfluidic chip enables isolation of exosomes and establishment of their protein profiles and associated signaling pathways in ovarian cancer. Cancer Res. 2019;79(13):3503–13.
Kim J, Sunkara V, Kim J, Ro J, Kim CJ, Clarissa EM, et al. Prediction of tumor metastasis via extracellular vesicles-treated platelet adhesion on a blood vessel chip. Lab Chip. 2022;22(14):2726–40.
Liu C, Xu X, Li B, Situ B, Pan W, Hu Y, et al. Single-exosome-counting immunoassays for cancer diagnostics. Nano Lett. 2018;18(7):4226–32.
Ko J, Bhagwat N, Yee SS, Ortiz N, Sahmoud A, Black T, et al. Combining machine learning and nanofluidic technology to diagnose pancreatic cancer using exosomes. ACS Nano. 2017;11(11):11182–93.
Wang Z, Li F, Rufo J, Chen C, Yang S, Li L, et al. Acoustofluidic salivary exosome isolation: a liquid biopsy compatible approach for human papillomavirus–associated oropharyngeal cancer detection. J Mol Diagn. 2020;22(1):50–9.
Bryl-Górecka P, James K, Torngren K, Haraldsson I, Gan LM, Svedlund S, et al. Microvesicles in plasma reflect coronary flow reserve in patients with cardiovascular disease. Am J Physiol Heart Circ Physiol. 2021;320(5):H2147–60.
Bryl-Górecka P, Sathanoori R, Arevström L, Landberg R, Bergh C, Evander M, et al. Bilberry supplementation after myocardial infarction decreases microvesicles in blood and affects endothelial vesiculation. Mol Nutr Food Res. 2020;64(20).
Gidlöf O, Evander M, Rezeli M, Marko-Varga G, Laurell T, Erlinge D. Proteomic profiling of extracellular vesicles reveals additional diagnostic biomarkers for myocardial infarction compared to plasma alone. Sci Rep. 2019;9(1).
Acknowledgements
The authors would like to acknowledge support from the Swedish Research Council (Grant No. 2019-00795 and 2018-03672), Mrs. Berta Kamprad Foundation and the European Commission for the Grant 80127 (Biowings, FET-OPEN).
Funding
Open access funding provided by Lund University.
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
Conflict of interest
The authors Megan Havers and Axel Broman have no conflicts of interest to declare that are relevant to the content of this article. Thomas Laurell is a founder of and owns stock in AcouSort AB, and Andreas Lenshof owns stock in AcouSort AB. AcouSort AB is a spin-off company from Lund University that manufactures and markets acoustofluidic technology.
Additional information
Published in the topical collection Advances in Extracellular Vesicle Analysis with guest editors Lucile Alexandre, Jiashu Sun, Myriam Taverna, and Wenwan Zhong.
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Havers, M., Broman, A., Lenshof, A. et al. Advancement and obstacles in microfluidics-based isolation of extracellular vesicles. Anal Bioanal Chem 415, 1265–1285 (2023). https://doi.org/10.1007/s00216-022-04362-3
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00216-022-04362-3