Abstract
The origin of the method of standard additions (SAM) and of the use of internal standard (IS) in instrumental chemical analysis and their spread into other areas has been reviewed. Recorded applications of IS range from flame spectroscopy in 1877 through multiple techniques to current use in NMR and standard additions with isotopically labelled internal standards in hyphenated techniques. For SAM, applications stemmed from polarography in 1937 and spread to most instrumental methods. Some misconceptions on priorities are corrected.
Similar content being viewed by others
Avoid common mistakes on your manuscript.
Introduction
The method of standard additions (SAM) and internal standard (IS) are regularly used and regarded as self-evident concepts to modern analytical chemists, thus apparently requiring no history. However, we will show both stem from the original work of several chemists whose priority should be properly acknowledged. The two methods are related by the addition of analytes to the sample but they are quite different; SAM uses known additions of the same analyte whilst IS uses a known amount of an easily measured analyte that is absent, or essentially absent, from the sample. The origin of both procedures is missing from most texts on instrumental methods of analysis [e.g. 1,2,3,4,5,6]. The histories of both procedures have been reviewed [7, 8], both are of interest in that they each have suffered from misrepresentations as to their originators and in their initial applications in various technique areas.
Method of standard additions
Polarography 1937 onwards
Burriel-Martí and Ramírez-Muños (1957) state [9] “This is a very simple method of obtaining experimental values, which has been known and widely used for a long time in all instrumental analyses (colorimetry, spectrography, polarography etc.), as it allows working with some accuracy without corrections and without adding reference elements (internal standards)”.
However, Kelly et al. [7] have most usefully noted that the method was first used by Hans Hohn and described in 1937 in his book, Chemische Analysen mit dem Polarographen [10] (see Fig. 1) as Die Methode des Eichzusatzes. Kelly et al. show the original polarograms for the determination of zinc by addition in the presence of Cu, Tl and Mn, and the method of calculation allowing for the effect of dilution following the addition of the Zn standard solution. In this section of text, Hone makes reference to one of Heyrovský’s accounts of polarography [11] but as this does not mention the eichzusatzes method, the priority remains with Hohn. Hohn then described in detail the application of eichzusätz to the determination of trace elements (Cu, Pb, Zn and Fe) in an essentially pure sample of aluminium [10 a]. Hohn’s book was most favourably reviewed in the Analyst by Glasstone in 1938, who concluded “Every analyst who is contemplating the use of the polarographic method should certainly have a copy of this book; it will save both time and anxiety” [12]. The Hohn method was used, in the same year it was first described, by Varasova for the determination of both Cu and Ni in Cu-Ni ores [13].
Kelly et al. state that the first use of the term “standard addition” in English was by Lingane and Kerlinger in 1941 [14]. The early polarographers only used a single addition until Kemula in 1966 introduced multiple additions in what he called the “sluice addition method” [15, 16].
Atomic spectrometry 1950 onwards
The first recent use of the method of standard additions outside the area of polarography was in atomic emission spectrometry as described in Harvey’s book, Spectrochemical Procedures [17], who referred to the method as an extrapolation method. The calibration graphs were presented by Harvey, not as used today, but with the axes reversed, using the abscissa (x axis) for instrument response, and the ordinate (y axis) for the addition amounts. Neither Lingane and Kerlinger, Kemula nor Harvey made reference to the work of Hohn.
Kelly et al. discussed the priority for the use of SAM beyond the field of polarography noting its use in emission spectrography by Harvey, reported in 1950 [17]. However, their analysis of priority between Campbell and Carl’s use in X-ray fluorescence (1954) [18] and Chow and Thompson’s use in flame photometry (1955) [19] is rendered pointless in the light of Chow and Thompson’s reference to Smales [20] (their reference [10]). The incorrect priority given to Chow and Thompson’s work was first stated in 2008 [21].
Smales in 1951 used the method of standard additions in flame photometry, interestingly plotting the data in the same manner as Harvey [17] but with no reference to his reasons, or reference to Harvey or to Hohn [10]. The paper by Smales was also missed by Mavrodineanu and Boiteux [22], who noted Harvey, but said erroneously that SAM was first applied in flame spectroscopy in 1957 by Fukushima et al. [23].
The standard addition-logarithmic extrapolation is available when the emission intensity is not linear with concentration in arc and spark [24] and in flame excitation [25]. In 1980, Bader [26] discussed the possible errors in the use of SAM and its application to potentiometry and to isotope dilution analysis but again gave no reference to Hohn. Ellison and Thompson have discussed the myth and reality of SAM [27] and Anderson has recently revisited the SAM to review its performance parameters [28].
1H NMR 2012 onwards
In a review of Quantitative1H NMR spectroscopy, the use of both SAM and IS was outlined [29].
UV-visible spectrometry 1960 onwards
Other than the tangential reference in 1957 to “colorimetry” [9] and despite extensive searches via SciFinder and journals (manually), it has not so far been possible to locate the first clear use of SAM in UV-visible spectrometry. The late adoption in UV-visible spectrophotometry is probably due to the intensive interest by inorganic analysts in the 1950s in new and selective colorimetric reagents and in the masking of interfering ions. Organic analysts used separations or corrected for irrelevant absorptions in the ultraviolet region using the Morton and Stubbs procedure [30] and its subsequent developments [31]. The earliest reference to hand, 1960, concerns the separation of microgram amounts of cobalt from nickel followed by determination with nitroso-R salt at 529 nm, no details were given, only the statement, “to estimate the efficiency of the method described, the method of standard addition of cobalt was followed” [32]. In 1961, a single standard addition procedure was published for the determination of sodium ethyl-mercurithiosalicylate [33].
Use of internal standards
Flame spectroscopy 1877 onwards
The first recorded use of IS was in flame spectroscopy in 1877 [34], by Gouy, who used it to verify the constancy of excitation in his flame. The procedure reappeared when commercial recording flame photometers became available in the 1940s [35]. IS was introduced in arc and spark emission spectrometry to deal with problems including excitation source instability and variable photographic film sensitivity [8] by the extensive studies by Gerlach using homologous line pairs and fixation pairs [36] (see Fig. 2) and is described in Harvey’s book [17]. Feldman in his report of experimental study of IS and the factors that influence signals in atomic emission and absorption spectrometry such as fuel-air flow, surface tension and aspiration rate [37] states that the first use of IS in AAS was in 1965 by Butler and Strasheim [38].
Chromatography 1954 onwards
The IS method is widely used in gas and in liquid chromatography for several reasons including avoidance of the need for measuring very accurately sample injection volumes and to compensate for sample losses between injection and detection and variable detector response. In Strouts et al. [39], the use of IS in GLC they cite was that by Ray in 1954 [40]. An early example of the use of IS in HPLC was in the determination of benzenepolycarboxylic acids [41].
1H NMR 2012 onwards
The first quantitative applications of 1H NMR were described in 1963 [42, 43]. The addition of the internal standard directly to the sample can be avoided in quantitative NMR by using a co-axial stem insert to the NMR tube whereby the standard is surrounded by the sample and thus both measured under the same conditions [29]. The selection of appropriate standards has for quantification by 1H NMR been discussed by Rundlöf et al. [44]. The progress of NMR spectroscopy in food analysis is the subject of an ongoing RSC series “Magnetic resonance in food science” and has been reviewed for food analysis in particular [45]. The recent availability of low-cost, bench-top 1H NMR has produced useful data on foodstuffs, for example on the origin [46] and on the adulteration of honey [47].
Spectrometry and spectroscopy1947 onwards
The problems with and the choice of appropriate IS in quantitative Raman spectrometry have been outlined [48]. An early example, if not the first, is that of antimony trioxide in the determination of the amounts of orthorhombic and tetragonal phases in samples of lead monoxide [49]. The use of an IS in quantitative infrared spectroscopy to avoid needing to determine sample thickness when using Nujol mulls dates back to 1947 [50] and 10 years later, for potassium bromide discs [51].
Routine applications
SAM combined with isotopically labelled IS is routinely applied in many laboratories including referee casework in the Laboratory of the Government Chemist where the utmost analytical rigour is required. The determination of the pesticide hexachlorobenzene in tea is illustrated as an example (Fig. 3) where the result is easily obtained from the linear regression function in Microsoft Excel. Innovation in SAM persists as shown by a recent study on a generic standard additions method in immunoassays to overcome complex biological matrix interference and accommodate non-linearity [52].
Conclusions
Both SAM and IS continue to be of great utility to analytical chemists. However, for the sake of historical accuracy and due acknowledgement of priority of invention, students should be taught the origins of the method of standard additions and that of the use of internal standards in chemical analysis.
The first use of a standard addition method in instrumental chemical analysis was that in polarography by Hohn in 1937. There have been some misunderstandings in the literature about its first use in other technique areas.
The first use of an internal standard was that by Gouy in 1887 in flame emission spectroscopy. Following the extensive studies by Gerlach of the sensitive multi-element emission spectrometric analysis, in the late 1920s, and subsequent appreciation of the concept, it has spread into numerous other technique areas.
We await with interest any published applications of SAM and/or IS in analytical molecular biology although here the specificity of PCR may render its use unnecessary in routine applications.
References
Willard H, Merritt L Jr, Dean J, Settle FA Jr. Instrumental methods of analysis. 7th ed. New York: Wadsworth; 1988.
Strobel HA, Heineman WR. Chemical instrumentation: a systematic approach. 3rd ed. New York: Wiley; 1989.
Dean JA. Analytical chemistry handbook. New York: McGraw Hill; 1995.
R. Kellner and H. M. Widmer (eds), J-M Mermet. M Otto and M Valcarcel Analytical chemistry, a modern approach to analytical science, 2nd edn, Wiley-VHC, (2004).
Robinson JW, Frame EMS, Frame GM II. Undergraduate instrumental analysis. 7th ed. Boca Raton: CRC Press; 2014.
Skoog DA, Halley FJ, Crouch SR. Principles of instrumental analysis. 7th ed. Boston: Cenage Learning; 2017.
Kelly R, Pratt KW, Guthrie WF, Martin KR. Origin and early history of Die Methode des Eichzusatzes or The Method of Standard Additions with primary emphasis on its origin, early design, dissemination, usage of terms. Anal Bioanal Chem. 2011;400:1805–12.
Thomsen V. Walther Gerlach and the foundations of modern spectrochemical analysis. Spectroscopy. 2002;17:117–20.
Burriel-Martí F, Ramírez-Muñoz J, Photometry F. A manual of methods and applications. Amsterdam: Elsevier; 1957.
Hohn H. Chemischen Analysen mit dem Polarographen, J: Springer Verlag, Berlin; 1937. p. 84.
Heyrovský J. Polarograhie. In: Bottger W, editor. Physikalische Methoden der Analyschen Chemie, Zr 3. Liepzg: Akademischen Verlageesellschaft; 1936. p. 260–322.
Glasstone S. In: Hohn H, editor. Review, Chemische Analysen mit dem Polarographen, vol. 63. Leipzig: Springer; 1937. Analyst (1938). p. 224–5.
Varasova EN. The polarograhic analysis of minerals I. Zavod Lab. 1937;6:804–7.
Lingane JJ, Kerlinger H. Polarographic determination of nickel and cobalt. Ind Eng Chem. 1941;13:77–80.
Kemula W. A simple apparatus for the determination of trace amounts of different ions using the hanging drop-mercury electrode. Microchem J. 1966;11:54–61.
Kemula W. Polarograhic methods of analysis. Pure Appl Chem. 1969;15:283–96.
Harvey CE. Spectrochemical procedures. Glendale: Applied Research Laboratories; 1950). In particular. p. 218–24.
Campbell WJ, Carl HF. Quantitative analysis of niobium and tantalum in ores by fluorescent X-ray spectroscopy. Anal Chem. 1954;26:800–5.
Chow TJ, Thompson TG. Flame photometric determination of strontium in sea water. Anal Chem. 1955;27:18–21.
Smales AA. The determination of strontium in sea water by a combination of flame photometry and radiochemistry. Analyst. 1951;76:348–55.
Kelly R, MacDonald BS, Guthrie WF. Gravimetric approach to the standard addition method in instrumental analysis, 1. Anal Chem. 2008;80:6154–8.
Mavrodineanu R, Boiteux H. Flame Spectroscopy. New York: Wiley; 1966.
Fukushima S, Takahashi K, Terasaka S, Otozai K. New application of addition-standard technique in flame spectrophotometry. Microchim Acta. 1957:183–95.
Gillis J, Eeckhout J. Dosages des faibles quantités d’un élément dans poudre sans l’aide d’échantllons standards. Spectrochim Acta. 1953;5:409–16.
Beukelman TE, Lord SS Jr. The standard addition technique in flame spectroscopy. Appld Spectros. 1969;14:12–7.
Bader M. A systematic approach to standard addition methods in instrumental analysis. J Chem Edn. 1980;57:703–6.
Ellison SLR, Thompson M. Standard additions: myth and reality. Analyst. 2008;133:992–7.
Anderson JET. The standard addition method revisited. Trends Anal Chem. 2017;89:21–33.
Bharti SK, Roy R. Quantitative 1H NMR spectroscopy. Trends Anal Chem. 2012;35:5–26.
Morton RA, Stubbs AL. Photoelectric spectrophotometry applied to the analysis of mixtures, and vitamin A oils. Analyst. 1946;71:348–56.
Ashton GC, Tootill JPR. A method of correcting for irrelevant absorption in ultra-violet spectrophotometric analysis. Analyst. 1956;81:232–8.
Athavale VT, Gulavane SV, Tillu MM. Separation of microgram amounts of cobalt in nickel by tributyl phosphate. Analyt Chim Acta. 1960;23:487–90.
Neurath AR. Spektrofotometrické stanovenie ethylmerkuritosalicylanu sodného. Ceeskoslov Farm. 1961;10:75–8.
Gouy GL. Recherches photométriques sur les flames colorées. Compt Rend (1877). 85:70–2.
Barnes RB, Richardson D, Berry JW, Hood RL. Flame photometry. A rapid analytical procedure. Ind Eng Chem. 1944;17:605–11.
Gerlach W, Schweitzer E. Foundations and methods of chemical analysis by the emission spectrum. A. Hilger, London, ((1929), and refs therein. This is the English translation of Die chemische Emission –spektralanalyse, Voss, Leipzig, (1928).
Feldman FJ. Internal standardization in atomic emission and absorption spectrometry. Anal Chem. 1970;42:719–24.
Butler LRP, Strasheim A. Multiple-element atomic absorption analysis. Spectrochim Acta. 1965;(7):1207–7.
Strouts CRN, Wilson HN, Parry-Jones RT. Chemical analysis: the working tools, vol. I. Oxford: Clarendon Press; 1962.
Ray NH. Gas chromatography. I. The separation and estimation of volatile organic compounds by gas-liquid partition chromatography. J Appl Chem. 1954;4:21–4.
Aurenge J. Séparation et dosage par chromatographie liquid sous haute pression des acides benzènepolycarboxyliques. J Chromatogr. 84:285–98.
Jungnickel JL, Forbes JW. Quantitative measurements of hydrogen types by integrated nuclear magnetic resonance intensities. Anal Chem. 1963;35:938–42.
Hollis DP. Quantitative analysis of aspirin, phenacetin and caffeine mixtures by nuclear magnetic resonance spectrometry. Anal Chem. 1963;35:1682–4.
Rundlöf T, Mathiassom M, Bekirglu S, Hakkarainen B, Bowden T, Arvidsson T. Survey and qualification of internal standards for quantification in 1H NMR spectroscopy. J Pharm Biomed Anal. 2010;52:645–51.
Syros A, Dais P. NMR spectroscopy in food analysis. Cambridge: RSC; 2013.
de Oliveira Resende Ribeiro R, Mársico ET, da Silva Carneiro C, Monteiro MLG, Júnior CAC, Mano S, et al. Classification of Brazilian honeys by physical and chemical methods and low field nuclear magnetic resonance (LF 1H NMR). LWT-Food Sci Tech. 2014;55:90–5.
de Oliveira Resende Riberio R, et al. Detection of honey adulteration by fructose corn syrup by low field nuclear magnetic resonance (LF 1H NMR). J Food Eng. 2014;135:39–43.
Pelletier MJ. Quantitative analysis using Raman spectroscopy. Appld Spectros. 2003;57:20A–42A.
Trisham GM. Quantitative analysis of orthorhombic and tetragonal lead monoxide mixtures using internal standard Raman spectroscopy. Proc Electrochem Soc. 1984;84-14:33–43.
Barnes RB, Gore RC, Williams EF, Linsley SG, Petersen EM. Infrared analysis of crystalline penicillins. Ind Eng Chem Anal Edn. 1947;19:620–7.
Wiberley SE, Sprague JW, Campbell JE. Quantitative infrared analysis of solids in potassium bromide using an internal standard. Anal Chem. 1957;29:210–3.
Pang S, Cowen S. A generic standard additions based method to determine endogenous analyte concentrations by immunoassays to overcome complex biological matrix interference. Sci Rep. 7(1):17542.
Acknowledgements
The authors thank members of the Division of Analytical Chemistry of EuChemS for their interest and support for this and other studies into the history of analytical chemistry in Europe. We thank Malcolm Burns for interesting discussions on molecular biology and Richard Brown for the data in Fig. 3. MJW gratefully acknowledges part funding through the UK Department for Business, Energy & Industrial Strategy as part of the Government Chemist Programme 2017-2020.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
No animals involved
No informed consents required
Conflict of interest
The authors declare that they have no conflicts of interest.
Additional information
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
About this article
Cite this article
Burns, D.T., Walker, M.J. Origins of the method of standard additions and of the use of an internal standard in quantitative instrumental chemical analyses. Anal Bioanal Chem 411, 2749–2753 (2019). https://doi.org/10.1007/s00216-019-01754-w
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00216-019-01754-w