Abstract
The purpose of this paper is to show ways to use modern H∞/μ-optimality theory as a tool for power electronics robust control synthesis. Both common methods of DC/DC converter control, Voltage Mode Control and Current Mode Control, are considered. From the control systems point of view, three classes of systems are discussed: stable minimum phase, stable non-minimum phase and unstable systems. The performance and stability specifications of the DC/DC converter control system are clearly stated, H∞/μ-optimal synthesis is carried out, and robust controllers are obtained. Transient behavior and robustness to uncertainties of closed loop systems are tested for the robust controllers by means of simulation, using a nonlinear model for the DC/DC converter, which includes switching effects. Results of the deterministic synthesis will be used in the synthesis of robust controllers for random switching converters.
Similar content being viewed by others
References
Mitchell DM (1988) DC/DC switching regulator analysis. McGraw-Hill, New York
Mohan N, Undeland TM, Robbins WP (1995) Power electronics. Wiley, New York
Ridley RB (1991) A new continuous-time model for current-mode control. IEEE T Power Electr 6(2):271–280
Lee FC, Fang ZD, Lee TH (1985) Optimal design strategy of switching converters employing current injected control. IEEE T Aero Elec Sys 21(7):21–35
Van Dijk E, Spruijt JN, O’Sullivan DM, Klaassens JB (1995) PWM-switch modeling of DC-DC converters. IEEE T Power Electr 10(6):659–664
Tse CK, Adams KM (1990) Qualitative analysis and control of DC-to-DC boost converter operating in discontinuous mode. IEEE T Power Electr 5(3):323–330
Tse CK, Adams KM (1992) Quasi-linear modeling and control of DC-DC converters. IEEE T Power Electr 7(2):315–323
Chen YT, Chen DY, Wu YP, Shih FY (1996) Small-signal modeling of multiple-output forward converters with current-mode control. IEEE T Power Electr 11(1):122–131
Skogestad S, Postlethwaite I (1996) Multivariable feedback control. Wiley, Chichester, England
Zhou K, Doyle J, Glover K (1996) Robust and optimal control. Prentice Hall, Englewood Cliffs, NJ
Morari M, Zafiriou E (1989) Robust process control. Prentice Hall, New York
Maciejowski JM (1989) Multivariable feedback design. Addison-Wesley, London
McFarlane DC, Glover K (1990) Robust controller design using normalized coprime factor plant description. Springer, Berlin Heidelberg New York
Petrović TB, Rakić AŽ (2003) Linear robust approach to DC/DC converter modeling: Part I – Deterministic switching. Electr Eng DOI 10.1007/s00202-003-0222-2
Garabandić DS, Petrović TB (1993) Robust controllers for PWM DC/DC converters using internal model control. P I Mech Eng I–J Sys 207:127–134
Petrović TB, Rakić AŽ (2001) Modelling and robust controllers for deterministic switching DC/DC converters. In: Proc 11th Int Symp Power Electronics, 31 October–2 November 2001, Novi Sad, Serbia and Montenegro, pp 374–382
The MathsWorks Inc (1997) Simulink. The MathWorks Inc, Nantick, MA
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Petrović, T.B., Rakić, A.Ž. Linear robust control of DC/DC converters: Part I – Deterministic switching. Electr Eng 87, 57–68 (2005). https://doi.org/10.1007/s00202-003-0222-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00202-003-0222-2