Abstract
Superplastic forming or gas forming is favorable method for the manufacture of sheet metal for making airplane skin panels. However, a major challenge in applying this method is controlling the thickness distribution in the formed product. Here, we explore a hot-bending-assisted process for gas forming of a deep trough with a complex shape for use in airplane wings. We propose the deliberate arrangement of wrinkles to achieve uniform thickness distribution. Because full-scale experiments are costly, sub-scale specimens are preferred for collecting experimental data. In linking sub-scale data to full-scale manufacturing, the size effect on wrinkle formation sites is important. The cause of the pre-form contour and larger-size specimen could be the greater variations in contour modes due to plastic buckling during the pre-forming stage.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Barnes AJ (2007) Superplastic forming 40 years and still growing. J Mater Eng Perform 16(4):440–454
Ghosh AK, Bieler TR (1998) Superplasticity and superplastic forming. Miner Metals Mater Soc
McNelley TR, Ishi KO, Zhilyaev AP, Swaminathan S, Krajewski PE, Taleff EM (2008) Characteristics of the transition from grain-boundary sliding to solute drag creep in superplastic AA5083. Metall Mater Trans A 39(1):50–64
Kim C, Kruger GA (2006) High throughput quick-plastic-forming. US7028519 B2
Schroth JG (2004) General motors quick plastic forming process. Advances in superplasticity and superplastic forming Symposium 9–20
Liu J, Tan MJ, Aue-u-lan Y, Jarfors AEW, Fong KS, Castagne S (2011) Superplastic-like forming of non-superplastic AA5083 combined with mechanical pre-forming. Int J Adv Manuf Technol 52:123–129
Liu J, Tan MJ, Lim CVS, Chua BW (2013) Process optimization and microstructural development during superplastic-like forming of AA5083. Int J Adv Manuf Technol 69:2415–2422
Lan HC, Fuh YK, Lee S, Chu CL (2013) Two-stage superplastic forming of a V-shape aluminum sheet into a trough with deep and irregular contour. J Mater Eng Perform 22(8):2241–2246
Luckey SG, Friedman PA, Weinmann KJ (2009) Design and experimental validation of a two-stage superplastic forming die. J Mater Proc Technol 209(4):2152–2160
Tang JS, Fuh YK, Lee S (2015) Superplastic forming process applied to aero-industrial strakelet: wrinkling, thickness and microstructure analysis. Int J Adv Manuf Technol 77:1513–1523
Hefti LD (2007) Commercial airplane applications of superplastically formed AA5083 aluminum sheet. J Mater Eng Perform 16(2):136–141
Wei Z, Zhang ZL, Dong XH (2006) Deep drawing of rectangle parts using variable blank holder force. Int J Adv Manuf Technol 29:885–889
Park D, Yarlagadda P (2008) Effects of punch load for elliptical deep drawing product of automotive parts. Int J Adv Manuf Technol 35:814–820
Menezes P, Kumar K, Kishore KS (2009) Influence of friction during forming processes—a study using a numerical simulation technique. Int J Adv Manuf Technol 40:1067–1076
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Lee, S., Tang, JS. & Chu, CL. Size effect in gas forming a hot-bent AA5xxx V-shaped trough trimmed for an airplane strakelet skin panel. Int J Adv Manuf Technol 86, 2747–2752 (2016). https://doi.org/10.1007/s00170-016-8380-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-016-8380-3