Skip to main content
SpringerLink
Log in

Experimental investigations, modeling, and optimization of multi-scan laser forming of AISI 304 stainless steel sheet

  • ORIGINAL ARTICLE
  • Published:
The International Journal of Advanced Manufacturing Technology Aims and scope Submit manuscript

Abstract

Laser forming experiments were conducted on AISI 304 stainless steel flat sheet to study the effects of process parameters and for developing an empirical model of bending angle, which could be useful to produce a class of developable surfaces from it using multiple parallel laser scans. Central composite design of experiments was used to perform the experiments, input–output relationships were established, and optimization of laser forming process under temperature gradient mechanism was carried out using a response surface methodology based on the experimental data. Laser power, scan speed, spot diameter, scan position, and number of scans were taken as input variables, and bending angle was considered as the output. The performance of the developed model was validated through a set of experimental data. The optimum process parameters for obtaining the maximum bending angle were determined, and those were verified through the real experiments. The effect of work-piece geometry on bending angle and that of multiple laser irradiations on bending rate were also investigated. Bending angle was found to be influenced by the work-piece geometry. Bending angle increased with the number of laser scans, but the bending rate decreased. Metallurgical changes at the laser irradiated zones of the laser formed samples, that is, micro-structures and micro-hardness were also studied using scanning electron microscope and Vickers’ micro-hardness tester, respectively. Microstructures were found to be refined and micro-hardness of the bent zone got improved due to the laser forming.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Shen H, Vollertsen F (2009) Modeling of laser forming—an review. Comput Mater Sci 46:834–840

    Article  Google Scholar 

  2. Vollertsen F (1994) An analytical model for laser bending. Lasers Eng 2:261–276

    Google Scholar 

  3. Cheng PJ, Lin SC (2001) An analytical model to estimate angle formed by laser. J Mater Process Technol 108:314–319

    Article  Google Scholar 

  4. McBride R, Bardin F, Gross M, Hand DP, Jones JDC, Moore AJ (2005) Modeling and calibration of bending strains for iterative laser forming. J Phys D Appl Phys 38:4027–4036

    Article  Google Scholar 

  5. Shen H, Shi Y, Yao Z, Hu J (2006) An analytical model for estimating deformation in laser forming. Comput Mater Sci 37:593–598

    Article  Google Scholar 

  6. Vollertsen F, Geiger M, Li WM (1993) FDM and FEM simulation of laser forming: a comparative study. Proceeding of the Fourth International Conference on Technology of Plasticity, 1793–1798

  7. Kyrsanidi AK, Kermanidis TB, Pantelakis SG (1999) Numerical and experimental investigation of the laser forming process. J Mater Process Technol 87:281–290

    Article  Google Scholar 

  8. Zhang L, Michaleris P (2004) Investigation of Lagrangian and Eulerian finite element methods for modeling the laser forming process. Finite Elem Anal Des 40:383–405

    Article  Google Scholar 

  9. Griffiths J, Edwardson SP, Dearden G, Watkins KG (2010) Finite element modeling of laser forming at macro and micro scales. Phys Procedia 5:371–380

    Article  Google Scholar 

  10. Hu J, Dang D, Shen H, Zhang Z (2012) A finite element model using multi-layered shell element in laser forming. Opt Laser Technol 44:1148–1155

    Article  Google Scholar 

  11. Yao CL, Chan KC, Lee WB (1998) Laser bending of lead frame materials. J Mater Process Technol 82:117–121

    Article  Google Scholar 

  12. Shichun W, Jinsong J (2001) An experimental study of laser bending for sheet metals. J Mater Process Technol 110:160–163

    Article  Google Scholar 

  13. Li W, Yao YL (2001) Laser forming with constant line energy. Int J Adv Manuf Technol 17:196–203

    Article  Google Scholar 

  14. Marya M, Edwards GR (2001) A study on the laser forming of near-alpha and metastable beta titanium alloy sheets. J Mater Process Technol 108:376–383

    Article  Google Scholar 

  15. Carey C, Cantwell WJ, Dearden G, Edwards KR, Edwardson SP, Watkins KG (2010) Towards a rapid, non-contact shaping method for fiber metal laminates using a laser source. Int J Adv Manuf Technol 47:557–565

    Article  Google Scholar 

  16. Pennuto J, Choi J (2005) Characteristics of parallel irradiations in laser forming of stainless steel. J Laser Appl 17(4):235–242

    Article  Google Scholar 

  17. Liu C, Yao YL (2002) Optimal and robust design of the laser forming process. J Manuf Process 4:52–66

    Article  Google Scholar 

  18. Cheng PJ, Lin SC (2000) Using neural networks to predict bending angle of sheet metal formed by laser. Int J Mach Tools Manuf 40:1185–1197

    Article  Google Scholar 

  19. Birnbaum AJ, Cheng P, Yao YL (2007) Effects of clamping on the laser forming process. J Manuf Sci Eng 129:1035–1044

    Article  Google Scholar 

  20. Shi Y, Hu J, Dong C (2011) Analysis of the geometric effect on the forming accuracy in laser forming. Proceedings of the Institution of Mechanical Engineers, Part B: J Eng Manuf 225:1792–1800

    Article  Google Scholar 

  21. Cheng J, Yao YL (2001) Cooling effects in multi-scan laser forming. J Manuf Process 3:60–72

    Article  Google Scholar 

  22. Edwardson SP, Abed E, Bartkowiak K, Dearden G, Watkins KG (2006) Geometric influences on multi-pass forming. J Phys D Appl Phys 39:382–389

    Article  Google Scholar 

  23. Edwardson SP, Griffiths J, Dearden G, Watkins KG (2010) Temperature gradient mechanism: overview of the multiple pass controlling factors. Phys Procedia 5:53–63

    Article  Google Scholar 

  24. Majumdar JD, Nath AK, Manna I (2004) Studies on laser bending of stainless steel. Mater Sci Eng A 385:113–122

    Article  Google Scholar 

  25. Walczak M, Grez JR, Celentano D, Lima EBF (2010) Sensitization of AISI 302 stainless steel during low-power laser forming. Opt Lasers Eng 48:906–914

    Article  Google Scholar 

  26. Knupfer SM, Paradowska AM, Kirstein O, Moore AJ (2012) Characterization of the residual strains in iterative laser forming. J Mater Process Technol 212:90–99

    Article  Google Scholar 

  27. Maji K, Pratihar DK (2011) Modeling of electrical discharge machining process using conventional regression analysis and genetic algorithms. J Mater Eng Perform 20:1121–1127

    Article  Google Scholar 

  28. Sun Y, Hao M (2012) Statistical analysis and optimization of process parameters in Ti6Al4V laser cladding using Nd:YAG laser. Opt Lasers Eng 50:985–995

    Article  Google Scholar 

  29. Steen WM, Mazumder J (2010) Laser material processing, 4th edn. Springer, London

    Book  Google Scholar 

  30. Montgomery DC (2001) Design and analysis of experiments. Wiley, New York

    Google Scholar 

  31. Dean A, Voss D (2006) Design and analysis of experiments. Springer (India), New Delhi

    MATH  Google Scholar 

  32. Minitab Inc. (2004) Minitab 14, Statistical Software. http://www.minitab.com

  33. Dowden JM (2001) The mathematics of thermal modeling: an introduction to the theory of laser materials processing. Chapman and Hall CRC Press, Florida

    Book  MATH  Google Scholar 

  34. Yu G, Masubuchi K, Maekawa T, Patrikalakis NM (2001) FEM simulation of laser forming of metal plates. J Manuf Sci Eng 123:405–410

    Article  Google Scholar 

  35. Cheng P, Yao YL, Liu C, Pratt D, Fan Y (2005) Analysis and prediction of size effect on laser forming of sheet metal. J Manuf Process 7:28–41

    Article  Google Scholar 

  36. Jha GC, Nath AK, Roy SK (2008) Study of edge effect and multi-curvature in laser bending of AISI 304 stainless steel. J Mater Process Technol 197:434–438

    Article  Google Scholar 

  37. Derringer G, Suich R (1980) Simultaneous optimization of several response variables. J Qual Technol 12(4):214–219

    Google Scholar 

  38. Dieter GE (1986) Mechanical metallurgy, 3rd edn. Mc Graw-Hill, New York

    Google Scholar 

  39. Bartkowiak K, Dearden G, Edwardson SP, Watkins K (2004) Development of 2D and 3D forming strategies for thin section materials using scanning optics. Proc. of ICALEO Laser Institute of America, Orlando

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Department of Mechanical Engineering, Indian Institute of Technology Kharagpur, Kharagpur, 721 302, India

    Kuntal Maji, D. K. Pratihar & A. K. Nath

Authors
  1. Kuntal Maji
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. D. K. Pratihar
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. A. K. Nath
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to D. K. Pratihar.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Maji, K., Pratihar, D.K. & Nath, A.K. Experimental investigations, modeling, and optimization of multi-scan laser forming of AISI 304 stainless steel sheet. Int J Adv Manuf Technol 83, 1441–1455 (2016). https://doi.org/10.1007/s00170-015-7675-0

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00170-015-7675-0

Keywords

Search

Navigation