Abstract
The cutting of high hardness composite materials such as sintered carbides based on the cobalt is a challenge from a technological point of view. The paper presents the influence of cutting data (v c, f, a p) and cobalt content in a work piece (10, 15, and 25 wt%) on the turning process of WC-Co with polycrystalline diamond (PCD) tool. This study focuses on the main component of cutting force F c and surface roughness, described by the roughness parameter Ra. The research plan, based on the Taguchi method, and variance analysis ANOVA were applied. Two types of experimental model, which describes turning process of sintered carbides based on the power function for three variables and polynomial functions as a modified method of the response surface methodology (RSM), were also presented.
Article PDF
Similar content being viewed by others
References
Fratila D (2013) Sustainable manufacturing through environmentally-friendly machining. In: Davim JP (ed) Green manufacturing process and systems materials forming, machining and tribology. Springer, Berlin Heidelberg, pp 1–21
de Lacalle LN L, Lamikiz A, de Larrinova FJ, Azkona I (2011) Advanced cutting tools. In: Davim J (ed) Machining of hard materials. Springer, London, pp 33–85
Newman ST, Nassehi A, Imani-Asrai R, Dhokia V (2012) Energy efficient process planning for CNC machining. CIRP J Manuf Sci Technol 5:127–136. doi:10.1016/j.cirpj.2012.03.007
Krajnik P, Kopac J (2004) Modern machining of die and mold tools. J Mater Process Technol 157–157:543–552. doi:10.1016/j.jmatprotec.2004.07.146
Dobrzański LA (2002) Podstawy nauki o materiałach i metaloznawstwo. Materiały inżynierskie z podstawami projektowania materiałowego. WNT, Warszawa
Zak Fang Z, Wang X, Ryu T, Hwang KS, Sohn HY (2009) Synthesis, sintering, and mechanical properties of nanocrystalline cemented tungsten carbide—a review. Int J Refract Met Hard 27:288–299. doi:10.1016/j.ijrmhm.2008.07.011
Khechba M, Hanini F, Halimi R (2011) Study of structural and mechanical properties of tungsten carbides coatings. Nat Technol 5:9–11
Jaworska L (2007) Diament, otrzymywanie i zastosowanie w obróbce skrawaniem. WNT, Warszawa
Arsecularatne JA, Zhang LC, Montross C (2006) Wear and tool life of tungsten carbide, PCBN and PCD cutting tools. Int J Mach Tools Manuf 46:482–491. doi:10.1016/j.ijmachtools.2005.07.015
Byrne G, Dornfeld D, Denkena B (2003) Advancing cutting technology. CIRP Ann Manuf Technol 52:483–507
Cook MW, Bosson PK (2000) Trends and recent developments in the material manufacture and cutting tool application of polycrystalline diamond and polycrystalline cubic boron nitride. Int J Refract Met Hard 18:147–152
Jackson MJ, Ahmed W (2009) Machining of brittle materials using nanostructured diamond tools. In: Jackson MJ, Morrell JS (eds) Machining with nanomaterials. Springer, US, pp 1–30
Bogus A, Gebeshuber IC, Pauschitz A, Roy M, Haubner R (2008) Micro-and nanomechanical properties of diamond film with various surface morphologies. Diam Relat Mater 17:1998–2004. doi:10.1016/j.diamond.2008.06.010
Mitura S, Mitura K, Niedzielski P, Luda P, Danilenko V (2006) Nanocrystalline diamond, its synthesies, properties and applications. J Achiev Mater Manuf Eng 16:9–16
Belmonte B, Ferro P, Fernandes AJS, Costa FM, Sacramento J, Silva RF (2003) Wear resistant CVD diamond tools for turning for sintered hardmetals. Diam Relat Mater 12:738–743
Belmonte M, Oliveira FJ, Sacramento J, Fernandes AJS, Silva RF (2004) Cutting forces evolution with tool wear in sintered hardmetal turning with CVD diamond. Diam Relat Mater 13:843–847. doi:10.1016/j.diamond.2003.11.018
Almeida FA, Oliveira FJ, Sousa M, Frenandes AJS, Sacrameto J, Silva RF (2005) Machining hardmetal with CVD diamond direct coated ceramic tools: effect of tool edge geometry. Diam Relat Mater 14:651–656. doi:10.1016/j.diamond.2004.09.002
Sung-jung H (2004) Micro cutting of tungsten carbides with sem direct observation method. Int J KSME 18–5:770–779
Almeida FA, Fernandes AJS, Silva RF, Oliveira FJ (2006) Re-sharpenable thick CVD diamond-coated Si3N4 tools for hardmetal turning. Surf Coat Technol 201:1776–1782. doi:10.1016/j.surfcoat.2006.03.005
Sung Jung H (2008) Environmentally conscious hard turning of cemented carbide materials on the basis of micro-cutting in SEM: stressing four kinds of cemented carbides with PCD tools. J Mech Sci Technol 22:1383–1390. doi:10.1007/s12206-008-0411-z
Sung Jung H (2009) Environmentally conscious hard turning of cemented carbide materials on the basis of micro-cutting in SEM (2nd report): stress turning with three kinds of cutting tools. J Mech Sci Technol 23:1959–1966. doi:10.1007/s12206-009-0512-3
Almeida FA, Fernandes AJS, Oliveira FJ, Silva RF (2009) Semi-orthogonal turning of hardmetal with CVD diamond and PCD inserts at different cutting angles. J Vac Sci Technol 83:1218–1223. doi:10.1016/j.vacuum.2009.03.029
Zhong ZW, Peng ZF, Liu N (2007) Surface roughness characterization of thermally sprayed and precision machined WC-Co and Alloy-625 coatings. Mater Charact 28:997–1005. doi:10.1016/j.matchar.2007.05.010
Inform to www.statsoft.com
Xueping Z, Erwei G, Liu CR (2009) Optimization of process parameter of residual stresses for hard turned surfaces. J Mater Process Technol 209:4286–4291. doi:10.1016/j.jmatprotec.2008.10.011
Muthukrishnan N, Davim JP (2009) Optimization of machining parameters of Al/SiC-MMC with ANOVA and ANN analysis. J Mater Process Technol 209:225–232. doi:10.1016/j.jmatprotec.2008.01.041
Lazarevic D, Madic M, Jankovic P, Lazarevic A (2011) Surface roughness minimization of polyamide PA-6 turning by Taguchi method. J Prod Eng 15–1:29–32
Krishankant, Taneja J, Bector M, Kumar R (2012) Application of Taguchi method of optimizing turning process by the effects of machining parameters. Int J Eng Adv Technol 2–1:263–274
Ramanujam R, Muthukrishnan N, Raju R (2011) Optimization of cutting parameters for turning Al-SiC(10p) MMC using ANOVA and grey relation analysis. Int J Precis Eng Manuf 12–4:651–656. doi:10.1007/s12541-011-0084-x
Chomsamutr K, Jongprosithporn S (2012) optimization parameters of tool life model using the Taguchi approach and response surface methodology. Int J Comput Sci Issues 9–3:120–125
Gopalsamy BM, Mondal B, Ghosh S (2009) Taguchi method and ANOVA: an approach for process optimization of hard machining while machining hardened steel. J Sci Ind Res 68:685–695
Catalogue of tools for sintered carbides Mitsubishi company
Shah SC, Geroge PM (2012) Surface roughness modeling in precision turning of aluminium by polycrystalline diamond tool using response surface methodology. Int J Emerge Technol Adv Eng 2–5:41–45
Doniavi A, Eskandarzade M, Tahmasebian M (2007) Empirical modeling of surface roughness in turning of 1060 steel using factorial design methodology. J Appl Sci 7–17:2509–2513
Abhang LB, Hameedullah M (2012) Optimal machining parameters for achieving the desired surface roughness in turning of steel. J Eng Res 9-1:37–45
Bajic D, Jozic S, Podrug S (2010) Design of experiment’s application in the optimization of milling process. METABK 49–2:123–126
Gowd GH, Reddy MG, Sreenivasulu B (2012) Empirical modeling of hard turning process of Inconel using response surface methodology. Int J EmergTechnol Adv Eng 2–10:498–504
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution License which permits any use, distribution, and reproduction in any medium, provided the original author(s) and the source are credited.
About this article
Cite this article
Zębala, W., Kowalczyk, R. Estimating the effect of cutting data on surface roughness and cutting force during WC-Co turning with PCD tool using Taguchi design and ANOVA analysis. Int J Adv Manuf Technol 77, 2241–2256 (2015). https://doi.org/10.1007/s00170-014-6382-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-014-6382-6