Abstract
A new method to fast identify machine tool selected point temperature rise is presented. Based on operational thermal modal analysis, a temperature rise curve of each machine tool selected point can be obtained, and thermal equilibrium time and steady-state temperature can be calculated based on the measured temperature data during a short time of a warm-up run. The major advantage of this approach is to predict selected point temperature rise of the machine tool in the short test period of time like half an hour instead of 3 to 6-h running test in practice. A spindle system model is analyzed in ANSYS software, and the simulation temperature data of several selected points are treated as the measured temperature. By dealing with the assuming measurement temperature based on the new method, the effectiveness of the method is verified and how to get the minimal time for identification is also illustrated. At last, the temperature rise test in the vertical machining center has been done. The temperature rise of the selected point has been identified in 26.35 min while the time of obtaining the temperature rise curve from the start-up of machine tool to the temperature steady-state machine tool reaching in practice is 320 min. The root mean squared error (RMSE) between the estimated and measured temperature is 0.107 °C, and the error between the estimated and measured steady-state temperature is 0.155 °C. So this method is proven to be effective and quick for identifying the machine tool selected point temperature rise. Furthermore, it has universal applicability due to the validation in the different spindles.
Similar content being viewed by others
References
Han J, Wang L, Wang H, Cheng N (2012) A new thermal error modeling method for CNC machine tools. Int J Adv Manuf Technol 62(1–4):205–212
Abele E, Altintas Y, Brecher C (2010) Machine tool spindle units. CIRP Annals-Manuf Technol 59(2):781–802
Mayr J, Jedrzejewski J, Uhlmann E, Alkan Donmez M, Knapp W, Härtig F, Wendt K, Moriwaki T, Shore P, Schmitt R, Brecher C, Würz T, Wegener K (2012) Thermal issues in machine tools. CIRP Annals - Manuf Technol 61(2):771–791
Yang Z, Sun M, Li W, Liang W (2011) Modified Elman network for thermal deformation compensation modeling in machine tools. Int J Adv Manuf Technol 54(5–8):669–676
Zhang JF, Feng PF, Chen C, Dingwen WY, Wu ZJ (2013) A method for thermal performance modeling and simulation of machine tools. Int J Adv Manuf Technol. doi:10.1007/s00170-013-4939-4
Uhlmann E, Hu J (2012) Thermal modelling of a high speed motor spindle. in Fifth Cirp Conference on High Performance Cutting 1:313–318
Holkup T, Cao H, Kolar P, Altintas Y, Zeleny J (2010) Thermo-mechanical model of spindles. CIRP Annals-Manuf Techn 59(1):365–368
Jedrzejewski J, Kowal Z, Kwasny W, Modrzycki W (2005) High-speed precise machine tools spindle units improving. J Mater Process Technol 162:615–621
Matsuo M, Yasui T, Inamura T, Matsumura M (1986) High-speed test of thermal effects for a machine-tool structure based on modal-analysis. Precis Eng-J Am Soc Precis Eng 8(2):72–78
Weck M, McKeown P, Bonse R, Herbst U (1995) Reduction and compensation of thermal errors in machine tools. CIRP Annals-Manuf Technol 44(2):589–598
Zhu J, Ni J, Shih AJ (2008) Robust machine tool thermal error modeling through thermal mode concept. J Manuf Sci Eng-Trans Asme 130(6):61006
Ahn JY, Chung SC (2004) Real-time estimation of the temperature distribution and expansion of a ball screw system using an observer. Proc Inst Mech Eng Part B-J Eng Manuf 218(12):1667–1681
Yang JG, Yuan JX, Ni J (1999) Thermal error mode analysis and robust modeling for error compensation on a CNC turning center. Int J Mach Tools Manuf 39(9):1367–1381
Carne TG, James GH (2010) The inception of OMA in the development of modal testing technology for wind turbines. Mech Syst Signal Process 24(5):1213–1226
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Xia, C., Fu, J., Xu, Y. et al. Machine tool selected point temperature rise identification based on operational thermal modal analysis. Int J Adv Manuf Technol 70, 19–31 (2014). https://doi.org/10.1007/s00170-013-5239-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-013-5239-8