Abstract
Many efforts in the past have been made to find more efficient methods for assembly sequence planning in machining area. While few researches reported in other area such as block assembly in shipbuilding industry. In general, a ship hull is built with hundreds of different blocks, most of which are complicated in structure and different from each other in assembly planning. Additionally, there may be a large number of feasible assembly sequences for any block. A better sequence can help to reduce the cost and time of the manufacture. Therefore, it is necessary to seek out the optimal sequence from all feasible ones. Currently, the assembly sequences are determined manually by some process engineers. Consequently, it is becoming a time-consuming task and cannot make the assembly plan consistent to improve productivity. In this paper, a methodology-integrated case-based reasoning and constraints-based reasoning is proposed to improve the assembly planning for complicated products. Besides, genetic algorithm is designed to evaluate and select the optimal sequence automatically from the reference ones. The validity of the method is tested using real blocks, and the results show that it can facilitate the optimal assembly sequences generation.
Similar content being viewed by others
References
Bourjault A (1984) Contributionune approche methodologique de l’assemblage automatise: elaboration automatique dessequences operatiores. Thesis d’Etat Universite de Franche-Comte, Besancon
De Fazio TL, Whitney DE (1987) Simplified generation of all mechanical assembly sequences. IEEE J Robot Autom RA-3(6):640–658658
Homem de Mello LS, Sanderson AC (1991) Representations of mechanical assembly sequences. IEEE Trans Robot Autom 7(2):211–227
Dini G, Santochi M (1992) Automated sequencing and subassembly detection in assembly planning. CIRP Ann Manuf Technol 41(1):1–4
Gottipolu RB, Ghosh K (2003) A simplified and efficient representation for evaluation and selection of assembly sequences. Comput Ind 50(3):251–264
Zhou XM, Du PG (2008) A model-based approach to assembly sequence planning. Int J Adv Manuf Tech 39(9–10):983–994
Hsu YY, Tai PH, Wang MW, Chen WC (2011) A knowledge-based engineering system for assembly sequence planning. Int J Adv Manuf Tech 55(5–8):763–782
Dong TY, Tong RF, Zhang L, Dong JX (2007) A knowledge-based approach to assembly sequence planning. Int J Adv Manuf Tech 32(11–12):1232–1244
Su Q (2007) Applying case-based reasoning in assembly sequence planning. Int J Prod Res 45(1):29–47
Seo Y, Sheen D, Kim T (2007) Block assembly planning in shipbuilding using case-based reasoning. Expert Syst Appl 32(1):245–253
Zhang ZY, Li Z, Jiang ZB (2008) Computer-aided block assembly process planning in shipbuilding based on rule-reasoning. Chin J Mech Eng 21(2):99–103
Chen WC, Tai PH, Deng WJ, Hsieh LF (2008) A three-stage integrated approach for assembly sequence planning using neural networks. Expert Syst Appl 34(3):1777–1786
Tseng YJ, Kao HT, Huang FY (2010) Integrated assembly and disassembly sequence planning using a GA approach. Int J Prod Res 48(20):5991–6013
Marian RM, Luong LHS, Abhary K (2006) A genetic algorithm for the optimisation of assembly sequences. Comput Ind Eng 50(4):503–527
Zhou W, Zheng JR, Yan JJ, Wang JF (2011) Novel hybrid algorithm for assembly sequence planning combining bacterial chemotaxis with genetic algorithm. Int J Adv Manuf Tech 52(5–8):715–724
Shan HB, Zhou SH, Sun ZH (2009) Research on assembly sequence planning based on genetic simulated annealing algorithm and ant colony optimization algorithm. Assembly Autom 29(3):249–256
Shuang B, Chen J, Li Z (2008) Microrobot based micro-assembly sequence planning with hybrid ant colony algorithm. Int J Adv Manuf Tech 38(11–12):1227–1235
Wang JF, Liu JH, Zhong YF (2005) A novel ant colony algorithm for assembly sequence planning. Int J Adv Manuf Tech 25(11–12):1137–1143
Chang CC, Tseng HE, Meng LP (2009) Artificial immune systems for assembly sequence planning exploration. Eng Appl Artif Intel 22(8):1218–1232
Wang Y, Liu JH (2010) Chaotic particle swarm optimization for assembly sequence planning. Robot Cim-Int Manuf 26(2):212–222
Tseng HE, Wang WP, Shih HY (2007) Using memetic algorithms with guided local search to solve assembly sequence planning. Expert Syst Appl 33(2):451–467
Gao L, Qian W, Li X, Wang J (2010) Application of memetic algorithm in assembly sequence planning. Int J Adv Manuf Tech 49(9–12):1175–1184
Rubinovitz J, Levitin G (1995) Genetic algorithm for assembly line balancing. Int J Prod Econ 41(1–3):343–354
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Qu, S., Jiang, Z. & Tao, N. An integrated method for block assembly sequence planning in shipbuilding. Int J Adv Manuf Technol 69, 1123–1135 (2013). https://doi.org/10.1007/s00170-013-5087-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-013-5087-6