Abstract
In this study, the strengthening with polymer the polypropylene fiber reinforced concrete exposed to high temperature was examined. Taguchi L9 (33) orthogonal array was used for the design of experiments. Three different parameters were used in the study; polypropylene fiber percentage (0 %, 1 % and 2 %), high temperature degree (300 °C, 600 °C and 900 °C) and curing period (3, 7 and 28 days). Cube samples of 100x100x100 mm sizes were produced for the compressive strength and ultrasonic pulse velocity tests. The samples were removed from the water and dried at 105 ± 5 °C, and then they were exposed to temperatures of 300 °C, 600 °C and 900 °C. Then, the polymerization of monomer and the vinyl acetate monomer impregnation on the samples were carried out. The compressive strength and ultrasonic pulse velocity tests were made. Taguchi analysis showed that the largest compressive strength and ultrasonic pulse velocity were obtained at a rate of 0 % from the samples with polypropylene fiber exposed to 600 °C and kept for 28 days as cure period. It was determined as the result of Anova analysis that high temperature had made biggest effect on the compressive strength and ultrasonic pulse velocity of the concrete reinforced with polymer.
Similar content being viewed by others
References
Allan A, Horn W (2006) Some properties of polymer-impregnated cements and concrete. J Am Ceram Soc 54:282–285
Al-Rousan RZ, Haddad RH, Swesi AO (2015) Repair of shear-deficient normal weight concrete beams damaged by thermal shock using advanced composite materials. Compos Part B 70:20–34
Awal ASMA, Shehu IA (2015) Performance evaluation of concrete containing high volume palm oil fuel ash exposed to elevated temperature. Constr Build Mater 76:214–220
Bal H (1998) Bazı Polimerlerin Harç Ve Betonda Kullanabilirliliğinin Araştırılması. Tezi, Yüksek Lisans
Behfarnia K, Behravan A (2014) Application of high performance polypropylene fibers in concrete lining of water tunnels. Mater Des 55:274–279
Behfarnia K, Farshadfar O (2013) The effects of pozzolanic binders and polypropylene fibers on durability of SCC to magnesium sulfate attack. Constr Build Mater 38:64–71
Bhutta MAR, Tsuyoshi M, Ken T (2013) Use of polymer-impregnated concrete permanent form in marine environment: 10-year outdoor exposure in Saudi Arabia. Constr Build Mater 43:50–57
Carstens PAB, Marais SA, Thompson CJ (2000) Improved and novel surface fluorinated products. J Fluor Chem 104:97–107
Chen CH, Huang R, Wu JK, Chen CH (2006) Influence of soaking and polymerization conditions on the properties of polymer concrete. Constr Build Mater 20:706–712
Chmıelewska B (2007) Adhesion Strength and Other Mechanical Properties of SBR Modified Concrete. In: 12Th International Congress on Polymers In Concrete. Chuncheon-Korea p. 157–66.
Czigány T (2006) Special manufacturing and characteristics of basalt fiber reinforced hybrid polypropylene composites: mechanical properties and acoustic emission study. Compos Sci Technol 66:3210–20
Davim PJ (2001) A note on determination of optimal cutting conditions for surface finish obtained in turning using of experiments. J Mater Process Technol 116:305–08
Deák T, Czigány T, Tamás P, Németh CS (2010) Enhancement of interfacial properties of basalt fiber reinforced nylon 6 matrix composites with silane coupling agents. Express Polym Lett 4:590–598
Ezziane M, Kadri T, Molez L, Jauberthie R, Belhacen A (2015) High temperature behaviour of polypropylene fibres reinforced mortars. Fire Saf J 71:324–331
Grdic ZJ, Curcic GAT, Ristic NS, Despotovic IM (2012) Abrasion resistance of concrete micro-reinforced with polypropylene fibers. Constr Build Mater 27:305–312
Grzybowski M, Shah SP (1990) Shrinkage cracking of fiber reinforced concrete. ACI Mater J 87:138–148
Güneyisi E, Gesoğlu M, Booya E, Mermerdaş K (2015) Strength and permeability properties of self-compacting concrete with cold bonded fly ash lightweight aggregate. Constr Build Mater 74:17–24
Li J (2009) The research on the interfacial compatibility of polypropylene composite filled with surface treated carbon fiber. Appl Surf Sci 255:8682–8684
Lin Y, Hsiao C, Yang H, Lin YF (2011) The effect of post-fire-curing on strength–velocity relationship for non-destructive assessment of fire-damaged concrete strength. Fire Saf J 46:178–185
López-Buendía AM, Romero-Sánchez MD, Climent V, Guillem C (2013) Surface treated polypropylene (PP) fibres for reinforced concrete. Cem Concr Res 54:29–35
Mehta PK, Monteiro PJ (2003) Concrete: microstructure, properties, and materials. Mc Graw-Hill, NY
Monteny J, Belie N, Vincke E, Verstraete W, Taerwe L (2001) Simulation of Corrosion In Sewer Systems By Laboratory Testing. In: Proceedings of The FibSymposium Concrete and Environment, Berlin-German. p. 91.
Moreıra P, Aguiar JB, Camões A (2006) Systems for superficial protection of concrete. In: ISPIC 2006 international symposium on polymers in concrete. Guimarães, Portugal, pp 225–36
Ogawa H, Kano K, Mimura T, Nagai K, Shirai A, Ohama Y (2007) Durability Performance of Barrier Penetrants on Concrete Surfaces. In: 12th International Congress on Polymers In Concrete, Chuncheon- Korea, p. 373–82.
Phadke MS (1995) Quality engineering using robust design. Prentice Hall International USA, Upper Saddle River
Pişkin A (2010) Polimer Beton Üretiminde Cam Tozu Kullanılabilirliğinin Araştırılması, (Yüksek Lisans Tezi). Bölümü, Sakarya Üniversitesi Yapı Eğitimi
Puy GWD, Dikeou JT (1973) Polymer in concrete. Publication SP- 40. American Concrete Institute, Detroit, Mich, p 33
Satish C, Ohama Y (1994) Polymers in concrete. Florida: CRC Press, Florida
Shıraı A, Kano K, Nagai K, Ide K, Ogawa H, Ohama Y (2007) Basic Properties of Barrier Penetrants as Polymeric Impregnants For Concrete Surfaces. In: 12th International Congress on Polymers in Concrete, Chuncheon-Korea, p. 607–615.
Sidney R, Young JF (1981) Concrete. Prentice Hall, Inc, Englewood Cliffs. New jersey 07632.
Sobczak L, Brüggemann O, Putz RF (2013) Polyolefin composites with natural fibers and wood – modification of the fiber/filler–matrix interaction. J Appl Polym Sci 127:1–17
Srubar WV (2015) Stochastic service-life modeling of chloride-induced corrosion in recycled-aggregate concrete. Cem Concr Compos 55:103–111
Sz M, Anna P, Gy M, Szép A, Keszei S, Czigány T et al (2003) Use of reactive surfactants in basalt fiber reinforced polypropylene composites. Macromol Symp 202:255–68
Tanaka T, Tsuruta K, Naitou T (2002) Development and application of polymer impregnated concrete. In: Proc of the first fib congress 2002, Osaka, concrete structures in the 21st century, p. 347–54.
Tanyildizi H (2008) Effect of temperature, carbon fibers, and silica fume on the mechanical properties of lightweight concretes. New Carbon Mater 23:339–344
Tanyildizi H (2009) Statistical analysis for mechanical properties of polypropylene fiber reinforced lightweight concrete containing silica fume exposed to high temperature. Mater Des 30:3252–3258
Unterweger C, Brüggemann O, Fürst C (2014a) Effects of different fibers on the properties of short-fiber-reinforced polypropylene composites. Combust Sci Technol 13:49–55
Unterweger C, Brüggemann O, Fürst C (2014b) Synthetic fibers and thermoplastic short-fiber-reinforced polymers: properties and characterization. Polym Compos 35:227–236
Whiting D, Kline DE (2003) Theoretical predications of the elastic moduli of polymer-impregnated cement paste and mortars. J Appl Polym Sci 20:3353–3363
Yalçın F (1998) Polimer emdirilmiş betonun bazı mekanik özelliklerinin incelenmesi. Yüksek Lisans Tezi, Sivas
Yang Z, Shi X, Creighton A, Peterson M (2008) Effect of styrene–butadiene rubber latex on the chloride permeability and microstructure. Constr Build Mater 23:2283–90
Yılmaz B, Dinç A, Şengül C, Akaya Y, Taşdemir MA (2007) Effects of cement/powder ratio on workability and mechanical behaviour of SCFRCs, International conferance on ACBM- ACI Lahore, p. 11.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Tanyildizi, H., Şahin, M. Taguchi optimization approach for the polypropylene fiber reinforced concrete strengthening with polymer after high temperature. Struct Multidisc Optim 55, 529–534 (2017). https://doi.org/10.1007/s00158-016-1517-z
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00158-016-1517-z