Abstract
A formaldehyde-free adhesive based on urea (U) and glutaraldehyde (GA) was developed. High reactivity of the urea-glutaraldehyde mix at ambient temperature allows for its cold setting. The glues of GA/U molar ratio between 0.8 and 1.2 were examined. It was found that for the satisfactory performance of the system, blending with nano-Al2O3 was necessary.
Similar content being viewed by others
References
Ballerini A, Despres A, Pizzi A (2005) Non-toxic, zero emission tannin-glyoxal adhesives for wood panels. Holz Roh-Werkst 63:477–478
Dziurka D, Łęcka J (2004) The effect of introducing acrylic emulsions grafted with acetoacetyl groups on the properties of particleboards. J Appl Polym Sci 91:2256–2264
EN 205 (2005) Test methods for wood adhesives for non structural applications—Determination of tensile strength of lap joints
IARC, Press Release No. 153 (2004) IARC classified formaldehyde as carcinogenic to humans. http://www.iarc.fr/en/media-centre/pr/2004/pr153.html
Japanese Industrial Standards A 5905, A 5908 (2003)
Kupec J, Charvátová K, Navrátil M, Křesálek V, Křesálková M (2003) Effect of cross-linking waste protein with dialdehydes on its biodegradation under anaerobic conditions. J Polym Environ 11:93–100
Kumar R, Choudhary V, Mishra S, Varma IK, Mattiason B (2002) Adhesives and plastics based on soy protein products. Ind Crops Prod 16:155–172
Mansouri HR, Pizzi A (2006) Urea-formaldehyde-propionaldehyde physical gelation resins for improved swelling in water. J Appl Polym Sci 102:5131–5136
Medved S, Šega B, Kunaver M, Šernek M (2009) Liquefied wood as formaldehyde scavenger for wood-based panels. In: Proc of international panel products symposium, Nantes, France, pp 61–69
NTIS—National Technical Information Service (2005) Formerly U.S. Clearinghouse for Scientific & Technical Information. ADA125-539 (Springfield, VA 22161)
Sigma-Aldrich Co. (2008) Material safety data sheet
Umemura K, Inoue A, Kawai S (2003) Development of new natural polymer-based wood adhesives I: dry bond strenth and water resistance of konjac glucomannan, chitosan and their composites. J Wood Sci 49:221–226
Wang S, Pizzi A (1997) Succinaldehyde induced water resistance improvements of UF wood adhesives. Holz Roh-Werkst 55:9–12
Zhai LL, Ling GP, Wang YW (2007) Effect of nano-Al2O3 on adhesion strength of epoxy adhesive and steel. Int J Adhes Adhes 28:23–28
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Mamiński, M.Ł., Król, M.E., Grabowska, M. et al. Simple urea-glutaraldehyde mix used as a formaldehyde-free adhesive: effect of blending with nano-Al2O3 . Eur. J. Wood Prod. 69, 505–506 (2011). https://doi.org/10.1007/s00107-010-0482-2
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00107-010-0482-2