Zusammenfassung
The production of plywood from previously compressed veneer allows to save up to 25% of glue, to halve the roughness of veneer and plywood and to press the plywood at a 22% lower pressure. However, the thickness of plywood reduces from 8.3 mm for uncompressed veneer to 6.4–8.0 mm for compressed veneer, and the density increases from 793 kg/m3 to 807–1005 kg/m3 accordingly.
Literatur
Bekhta PA (2003) Method of the Plywood Production. Patent of Ukraine 62787A dated 15.12.2003, Bulletin 12
Bekhta PA (2004) Method of the Plywood Production. Patent of Ukraine 66581A dated 17.05.2004, Bulletin 5
EN 314-2 (1993) Plywood. Bonding quality. Part 2: Requirements
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Bekhta, P., Marutzky, R. Reduction of glue consumption in the plywood production by using previously compressed veneer . Holz Roh Werkst 65, 87–88 (2007). https://doi.org/10.1007/s00107-006-0142-8
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00107-006-0142-8