Abstract
As a means of effecting better control of end-point temperatures at the Jones & Laughlin oxygen furnace plant, a set of mathematical equations has been developed. These are the product of a thermochemical analysis of the process and are designed to calculate the required scrap, lime, and hot metal additions in terms of a number of independent variables. Results of test heats were encouraging enough to warrant adoption of this technique by the production dept.
Similar content being viewed by others
References
F. J. McMulkin: Oxygen Steelmaking in Canada, Open Hearth Proceedings, AIME 1955, 38, pp. 241–254.
W. O. Philbrook: Engineering Thermochemistry of Oxygen Steel-making Processes, Open Hearth Proceedings, AIME, 1958, 41, pp. 382–398. a. Page 386 b. Page 393
T. P. Murray, and V. G. Shaw: Two Color Pyrometry in the Steel Industry, ISA Journal, December 1958.
P. D. Rossini, et al: National Bureau of Standards Circular 500 (1952).
K. K. Kelley, Bureau of Mines Bulletin 371, (1934).
Physical Chemistry of Steelmaking Committee, Basic Open Hearth Steelmaking, Revised Ed. AIME, 1951. a. Page 786 b. Page 541 c. Page 777
W. H. McAdams, Heat Transmission, 3rd Ed. New Work, 1954. McGraw-Hill Book Company, pp. 69–76.
J. E. Rehder, Written Discussion on the Solubility of Carbon in Molten Iron and in Iron-Silicon and Iron-Manganese Alloys, J. Chipman et al, Trans. Am. Soc. Metals (1952) 44, p. 1231
A. G. Guy, Elements of Physical Metallurgy, 1951. Addison-Wesley Press, Inc. p. 77.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Slatosky, W.J. End-Point Temperature Control in LD Steelmaking. JOM 12, 226–230 (1960). https://doi.org/10.1007/BF03377972
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03377972