References
L. Nastac et al., Internl. Journal of Cast Metals Research, vol. 19, No. 2, 2006, pp. 1–20.
L. Nastac, Numerical Simulation of Macro-Shrinkage and Micro-Shrinkage in A356 Sand Mold Castings, CFD Modeling and Simulation in Materials Processing, TMS Annual Meeting, 2012.
Novaflow&SolidTM and NovaStressTM Software (Novacast AB, Sweden, www.novacast.se).
A.K. Dahle and H.H. St John, Acta mater., 1999, vol. 47, pp. 31–41.
ExOne/Prometal RCT: http://www.exone.com and http://www.prometal.com.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Whitley, B. Novel Three-Dimensional Modeling Technology for Advanced Simulation, Printing, and Casting of A356 Impeller. Inter Metalcast 7, 57–59 (2013). https://doi.org/10.1007/BF03355546
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03355546