Abstract
Thermosonic ball bonding is a major interconnect process in microelectronics packaging and is positioned to remain one of the key process technologies available to package designers in the near future. However, the main wire material used in fine pitch (FP) and ultra-fine pitch (UFP) ball bonding is gold and with significant increases in gold price, gold ball bonding has become a more costly process that has a considerable economic effect on the assembly of packages used in consumer electronics. An alternative wire material to gold is copper, which is much cheaper and has several technical benefits including better electrical conductivity and has been widely used in discrete and power devices with wire diameters typically larger than 30μm in diameter for many years. However, copper wire behaves quite differently than gold due to its different physical properties, some of which are beneficial and others detrimental to bonding performance. In this article, we briefly review some of the advantages and difficulties with using copper wire advanced packaging and explain why copper cannot replace gold in many applications and why gold offers significant benefits.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Semiconductor Industry Opinions Concerning the Selection of Bonding Wire Material, SEMI market survey, January 2010
G. Harman.Wire bonding in microelectronics: materials, processes, reliability and yield. McGraw-Hill electronics packaging and interconnection series. 2nd Edn. 1997
C.D. Breach. Advanced Packaging October (2008)
Saraswati, Ei Phyu Phyu Theint, D. Stephan, H.M. Goh, E. Pasamanero, D. Calpito, F. Wulff, C.D. Breach. Proceedings of 7th Electronic Packaging Technology Conference, 2005,2, 7-9th Dec. 2005
K. Toyozawa, K. Fujita, S. Minamide, T. Maeda. IEEE Trans. On Comp. Hybrids & Manfg. Tech.13 (1990) 667
A. Shah, M. Mayer, Y.N. Zhou, S.J. Hong, J.T. Moon. IEEE Trans. On Elec. Packgg. Manfg.32 (2009) 176
J. Onuki, M. Koizumi, H. Suzuki, I Araki, T. Iizuka. J. Appl. Phys.68 (1990) 5610
F. Wulff, C.D. Breach, Saraswati, K. Dittmer, M. Garnier. Proceedings of Semicon Technical Symposium S2, May 6th Singapore (2005)
T. Ikeda, N. Miyazaki, K. Kudo, K. Arita, H. Yakiyama. Journal of Electronic Packaging121 (1999) 85
A. Pequegnat, C.J. Hang, M. Mayer, Y. Zhou, J.T. Moon, J. Persic. J. Mater Sci: Mater Electron20 (2009) 1144
N. Srikanth, J. Premkumar, M. Sivakumar, Y.M. Wong, C.J. Vath. Proceedings of 9Th Electronic Packaging Technology Conference, 10-12th Dec. 2007
J. Onuki, M. Koizumi, H. Suzuki, I. Araki. IEEE Trans. On Comp. & Manfg. Tech.14 (1991) 392
C.D. Breach, F.W. Wulff. Microelectronics Reliability50 (2010) 1
C.J. Hang, C.Q. Wang, M. Mayer, Y.H. Tian, Y. Zhou, H.H. Wang. Microelectronics Reliability48 (2008) 416
J.F.M.J. Caers, A. Bischoff, K. Falk and J. Roggen. Japan Int’l Electronics Manfg. Technol. Symp. (1993)
H. Chen, S.W.R. Lee, Y Ding. 7th IEEE CPMT Conference on High Density Microsystems Design and Packaging and Component Failure Analysis, Shanghai, China (2005)
H.K. Kung, H.S. Chen. Proceedings of 11th E Electronic Packaging Technology Conference, 9-11th Dec. 2009
Y.L. Zhang, S. Kumar, J. Sena, I. Villavert, M. Seidel. Proc. IMAPS (2007)
F.W. Wulff, C.D. Breach, Saraswati and D. Stephan. EPTC 2004 (Electronics Packaging and Technology Conference), Pan Pacific Hotel, Dec 8-10, Singapore (2004)
M. Drozdov, V. Gur, Z. Atzmon, W.D. Kaplan. J. Mater. Sci.43 (2008) 6029
J. Onuki, M. Koizumi, I. Araki. IEEE Trans. On Comp. Hybrids & Manfg. Tech.12 (1987) 550
J. Onuki, M. Koizumi, H. Suzuki, I. Araki. IEEE Trans. On Comp. & Manfg. Tech.14 (1991) 392
S.L. Khoury, D.J. Burkhard, D.P. Galloway, T.A. Scharr. IEEE Trans. On Comp. Hybrids & Manfg. Tech.13 (1990) 673
L.T. Nguyen, D. MacDonald, A.R. Danker. IEEE Trans. Comp. Packg. & Manfg. Tech.18 (1995) 423
S. Thomas, H. Berg. IEEE Trans. On Comp. Hybrids & Manfg. Tech.10 (1987) 252
C.W. Tan, A.R. Daud. Journal of Mater. Eng. & Perf.11 (2002) 283
C.W. Tan, A.R. Daud, M.A. Yarmo. Appl. Surf. Sci.191 (2002) 67
S. Murali, N. Srikanth, C.J. Vath. Materials Characterization50 (2003) 39
N. Srikanth, S. Murali, Y.M. Wong, C.J. Vath. Thin Solid Films462–463 (2004) 339
S. Murali, N. Srikanth, C.J. Vath. Materials Research Bulletin38 (2003) 637
H.J. Kim, J.Y. Lee, K.W. Paik, K.W. Koh, J. Won, S. Choe, J. Lee, J.T. Moon and Y.J. Park. IEEE Trans.26(2) (2003) 267
F. Wulff, C.D. Breach, Saraswati, K. Dittmer, M. Garnier. Proceedings of Semicon Technical Symposium S2, May 6th Singapore (2005)
S. Kaimori, T. Tonaka, A. Mizoguchi. IEEE Trans. Adv. Packgg.29 (2006) 227
T. Uno, S. Terashima, T. Yamada. Microelectronics Reliability, Special Issue on Copper Wire Bonding, In Press (2010)
C.J. Vath, M. Gunasekran, Ramkumar Malliah Microelectronics Reliability, Special Issue on Copper Wire Bonding, In Press (2010)
K. Dittmer.Cost Savings for Bonding Wire. Presentation at Semicon Singapore 2009
J. Ramos. CopperWire Manufacturing Challenges. Presentation at Semicon Singapore 2008
Author information
Authors and Affiliations
Additional information
Dr. Christopher Breach owns and manages ProMat Consultants. His expertise is in the areas of polymer physics and physical chemistry, materials characterization, materials science and engineering in microelectronics packaging, intermetallics and interdiffusion, bonding wire (micro-alloy) design. He earned his PhD in physics & physical chemistry of polymer blends (sponsored by the Defence Research Agency) from Brunel University, London. He has held senior management positions in assembly materials for electronics packaging and capital equipment. His postdoctoral research was sponsored by ICI at the Department of Physics, Cavendish Laboratory, University of Cambridge on contact mechanics between polymers, polymer interdiffusion (reptation) and the physics of bi-material fracture. He is a Chartered Scientist, Chartered Physicist and Professional Member of the Institute of Physics. He is also a member of The Institute of Electrical and Electronics Engineers (IEEE), the Materials Research Society (MRS) and the Electrochemical Society (ECS).
Rights and permissions
Open Access This is an open access article distributed under the terms of the Creative Commons Attribution Noncommercial License ( https://creativecommons.org/licenses/by-nc/2.0 ), which permits any noncommercial use, distribution, and reproduction in any medium, provided the original author(s) and source are credited.
About this article
Cite this article
Breach, C.D. What is the future of bonding wire? Will copper entirely replace gold?. Gold Bull 43, 150–168 (2010). https://doi.org/10.1007/BF03214983
Issue Date:
DOI: https://doi.org/10.1007/BF03214983