Abstract
Electrocatalysts, Pt−Ni and Ni, catalysts loaded separately about 20 wt.% onto carbon nanotubes (CNTs) by the impregnation method for a direct methanol fuel cell (DMFC). The particles size and morphology of these catalysts were confirmed by XRD and TEM analysis. From the X-ray diffraction analysis, the peaks of Pt−Ni and Ni were displayed separately for each catalyst. TEM images showed that the metal catalysts were loaded uniformly and finely onto carbon nanotubes with sizes ranging from 2 to 4 nm. Finally, an electrochemical analysis was performed to determine catalytical activity of these catalysts by the cyclic voltammogram (CV).
Similar content being viewed by others
References
Chem. Rev. 104, 4245 (2004).
K. I. Han, J. S. Lee, S. O. Park, S. W. Lee, Y. W. Park, and H. S. Kim,Electrochim. Acta 50, 791 (2004).
J. Prabhuram, T. S. Zhao, C. S. Wong, and J. W. Guo,J. Powder Sci. 134, 1 (2004).
E. Ochoa-Fernández, De Chen, Zhixin Yu, Bård Tøtdal, M. Rønning, and A. Holmen,Surf. Sci. 554, L107 (2004).
S. Noda, Y. Tsuji, Y. Murakami, and S. Maruyama,Appl. Phys. Lett. 86, 173106 (2005).
Z. B. wang, G. P. Yin, P. F. Shi, and Y. C. Sun,Electrochem. Solid State Lett. 9, 13 (2006).
Y. K. Seo, Y. H. Kim, U. C. Chung, and W. S. Chung,Solid State Phenomena 119, 247 (2007).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Dipti, S.S., Chung, UC. & Chung, W.S. Characteristics of the carbon nanotubes supported Pt−Ni and Ni electrocatalysts for DMFC. Met. Mater. Int. 13, 257–260 (2007). https://doi.org/10.1007/BF03027814
Issue Date:
DOI: https://doi.org/10.1007/BF03027814