Abstract
In order to present better prediction capability in computational analysis, mechanical properties of the dualphase high strength steel have been characterized especially for anisotropy as well as the Bauschinger and transient behavior. As for the anisotropy, the non-quadratic anisotropic yield function Yld2000-2d has been utilized and its material parameters have been obtained using the uni-axial tension tests as well as the hydraulic bulge test. To measure the hardening behavior including the Bauschinger and transient behavior, a newly developed test method has been applied for the uni-axial tension/compression and compression/tension tests, in which solid blocks along the both sides of the sheet specimen prevent buckling. From the tension/compression curves, the equations to describe isotropic and kinematic hardening behavior have been obtained. The modified Chaboche model has been confirmed to well represent the hardening behavior including the Bauschinger and transient behavior.
Similar content being viewed by others
References
X. M. Chen, J. J. Drouin, D. R. Coopmans, R. D. Dell'Osso, and P. J. Belanger,SAE Technical Paper 2001-01-3074 (2001).
M. F. Shi, G. H. Thomas, M. X. Chen, and J. R. Fekete,ISS 43rd Mechanical Working and Steel Processing Conferences, p. 27, Charlotte, N.C., U.S.A. (2001).
J. R. Fekete, A. M. Stibich, and M. F. Shi,SAE Technical Paper 2001-01-3101 (2001).
A. A. Konieczny, M. F. Shi, and C. Du,SAE Technical Paper 2001-01-3106 (2001).
5.T. Uemori, T. Okada, and F. Yoshida,Metals and Materials 4, 311 (1998).
6.F. Barlat, J. C. Brem, J. W. Yoon, K. Chung, R. E. Dick, S. H. Choi, F. Pourboghrat, E. Chu, and D. J. Lege,Int. J. Plasticity 19, 1287 (2003).
7.J. L. Chaboche,Int. J. Plasticity 2, 149 (1986).
K. Chung, M. G. Lee, D. Kim, C. Kim, M. L. Wenner, and F. Barlat,Int. J. Plasticity (submitted).
K. Chung, Y. Hayashida, D. J. Lege, J. C. Brem, K. Matsui, F. Barlat, Y. Maeda, R. Becker, M. Yanagawa, S. J. Murtha, and S. Hattori,Int. J. Plasticity (submitted).
10.L. Geng, Y. Shen and R. H. Wagoner,Int. J. Plasticity 18, 743 (2002).
11.L. Geng and R. H. Wagoner,Int. J. Mech. Sci. 44, 123 (2002).
V. Balakrishnan,M.S. Thesis, The Ohio State University (1999).
13.K. Chung and R. H. Wagoner,Metall. Trans. A 17, 1001 (1986).
14.D. C. Drucker and L. Palgen,J. Appl. Mech. 48, 479 (1981).
M. G. Lee, D. Kim, K. Chung, J. R. Youn, and T. J. Kang,Polym. Polym. Compos. (accepted).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kim, D., Lee, MG., Kim, C. et al. Measurements of anisotropic yielding, bauschinger and transient behavior of automotive dual-phase steel sheets. Met. Mater. Int. 9, 561–570 (2003). https://doi.org/10.1007/BF03027256
Issue Date:
DOI: https://doi.org/10.1007/BF03027256