Abstract
The effects of intermediate annealing temperature on the corrosion behavior of Zr−0.4Nb−0.8Sn−0.3Fe−0.2Cr−0.1Mn and Zr−1.5Nb−0.4Sn−0.1Fe alloys intermediate-annealed at various temperatures were investigated. The relationship between the corrosion behavior and the precipitation characteristics was discussed. A desirable microstructure containing a fine dispersion of second phase particles was obtained by intermediate annealing at a low temperature. Intermediate annealing at higher temperatures resulted in undesirable microstructural features including the precipitation of β-Zr and the coarsening of precipitates. The corrosion resistance of the alloys was apparently degraded with increasing size of the precipitated intermetallic compounds, especially in Zr−1.5Nb−0.4Sn−0.1Fe where β-Zr precipitated on higher-temperature annealing. The corrosion behavior of Zr−1.5Nb−0.4Sn−0.1Fe was more sensitive to intermediate annealing temperature than was that of Zr−0.4Nb−0.8Sn−0.3Fe−0.2Cr−0.1Mn. An examination of particle size distribution revealed that the corrosion behavior of the alloys was dominantly affected by β-Zr larger than the specific size, which is responsible for the difference in corrosion resistance between Zr−0.4Nb−0.8Sn−0.3Fe−0.2Cr−0.1Mn and Zr−1.5Nb−0.4Sn−0.1Fe. It is implied from these results that the optimum corrosion performance of niobium-containing zirconium alloys is achieved by maintaining a uniform distribution of fine second phase particles.
Similar content being viewed by others
References
F. Garzarolli, H. Stehle and Steinberg,Zirconium in the Nuclear Industry: 11th Int. Symp., ASTM STP 1295 (eds., E. R. Bradley and G. P. Sabol), p. 12, American Society for Testing and Materials, Philadelphia, PA (1996).
G. P. Sabol, G. R. Kilp, M. G. Balfour and E. Roberts,Zirconium in the Nuclear Industry: 8th Int. Symp., ASTM STP 1023 (eds., L. E. P. Van Swam and C. M. Eucken), p. 227, American Society for Testing and Materials, Philadelphia, PA (1989).
A. V. Nikulina, A. M. Vladimir, M. M. Peregud, Y. K. Bibilashvili, V. A. Kotrekhov, A. F. Lositsky, N. V. Kuzmenko, Y. P. Shevnin, V. K. Shamardin, G. P. Kobylyansky and A. E. Novoselov,Zirconium in the Nuclear Industry: 11th Int. Symp., ASTM STP 1295 (eds., E. R. Bradley and G. P. Sabol), p. 785, American Society for Testing and Materials, Philadelphia, PA (1996).
J.-P. Mardon, D. Charquet and J. Senevat,Zirconium in the Nuclear Industry: 12th Int. Symp., ASTM STP 1354 (eds., G. P. Sabol and G. D. Moan), p. 505, American Society for testing and Materials, West Conshohocken, PA (2000).
K. Yamate, A. oe, M. Hayashi, T. Okamoto, H. Anada and S. Hagi,Proc. of the 1997 Int. Topical Meeting on LWR Fuel Performance, p. 318 (1997).
G. P. Sabol, R. J. Comstock, R. A. Weiner, P. Larourer and R. N. Stanutz,Zirconium in the Nuclear Industry: 10th Int. Symp., ASTM STP 1245 (eds., A. M. Garde and E. R. Bradley), p. 724, American Society for Testing and Materials, Philadelphia, PA (1994).
R. J. Comstock, G. Schoenberger and G. P. Sabol,Zirconium in the Nuclear Industry: 11th Int. Symp., ASTM STP 1295 (eds., E. R. Bradley and G. P. Sabol), p. 710, American Society for Testing and Materials, Philadelphia, PA (1996).
H. Anada, K. Nomoto and Y. Shida,Zirconium in the Nuclear Industry: 10th Int. Symp., ASTM STP 1245 (eds., A. M. Garde and E. R. Bradley), p. 307, American Society for Testing and Materials, Philadelphia, PA (1994).
V. F. Urbanic and M. Griffiths,Zirconium in the Nuclear Industry: 12th Int. Symp., ASTM STP 1354 (eds., G. P. Sabol and G. D. Moan), p. 641, American Society for Testing and Materials, West Conshohocken, PA (2000).
V. F. Urbanic, B. D. Warr, A. Manolescu, C. K. Chow and M. W. Shanahan,Zirconium in the Nuclear Industry: 8th Int. Symp., ASTM STP 1023 (eds., L. F. P. Van Swam and C. M. Eucken), p. 20, American Society for Testing and Materials, West Conshohocken, PA (1989).
V. F. Urbanic and R. W. Gilbert,Proc. of IAEA Tech. Committee Meeting on Fundamental Aspects of Corrosion on Zirconium Base Alloys in Water Reactor Environments, p. 262, Int. Atomic Energy Agency, Vienna, IWGFPt/34 (1990).
G. P. Sabol, G. Schoenberger and M. G. Balfour,Proc. of IAEA Tech. Committee Meeting on Materials for Advanced Water Cooled Reactor, p. 122, Int. Atomic Energy Agency, Vienna, IAEA-TECDOC-665 (1992).
G. P. Sabol, G. R. Kilp, M. G. Balfour and E. Roberts,Zirconium in the Nuclear Industry: 8th Int. Symp. ASTM STP 1023 (eds., L. F. P. Van Swam and C. M. Eucken), p. 227, American Society for Testing and Materials, West Conshohocken, PA (1989).
B. Herb, H. Ruhmann and A. Konig,Zirconium in the Nuclear Industry: 12th Int. Symp., ASTM STP 1354 (eds., G. P. Sabol and G. D. Moan), p. 482, American Society for Testing and Materials, West Conshohocken, PA (2000).
H. Anada, B. J. Herb, K. Nomoto, S. Hagi, R. A. Graham and T. Kuroda,Zirconium in the Nuclear Industry: 11th Int. Symp., ASTM STP 1295 (eds., E. R. Bradley and G. P. Sabol), p. 74, American Society for Testing and Materials, Philadelphia, PA (1996).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Park, JY., Jeong, YH. & Jung, YH. Effects of precipitation characteristics on the out-of-pile corrosion behavior of niobium-containing zirconium alloys. Met. Mater. Int. 7, 447–455 (2001). https://doi.org/10.1007/BF03027086
Issue Date:
DOI: https://doi.org/10.1007/BF03027086