Abstract
The Province of Manitoba Anaesthetic Machine Program, complétéd in June 1980, accommo-dated Canadian Standards Association Standard Z168.3-M1980, “Continuous Flow Inhala-tion Anesthetic Apparatus (Anesthetic Machines) for Medical Use”. The goal of the program was to have all anaesthetic machines in hospitals in the province with the same basic design and safety features: “oxygen right”; characteristic oxygen knob profile; oxygen supply pressure failure device and alarm; standardized “oxygen flush” mechanism; pipeline inlets and pressure gauges; uniform color coding; standardized common gas outlet; pin indexed cylinder yokes; descriptive labels concerning safety devices; check valves within machine piping. Open group-purchase tenders were invited for both machine upgrading and replace-ment. Of 212 machines surveyed, 127 were upgraded (cost $100,000), 65 were replaced (cost $ 175,000), three were already satisfactory, and 17 were no longer required and were removed permanently from service. The Manitoba Program provided a satisfactory solution to a most important problem.
RéSUMé
Au Manitoba, un programme de modernisation des appareils d’anesthésie pour conformer l’équipement à la norme Z168.3-M1980 de Standard Canada a été complété en juin 1980. L’objectif du programme consistait a modifier tous les appareils d’anesthésie de la province pour obtenir la même disposition de base et les mêmes éléments de sécurité: 1’oxygène du côte droit; la forme caractéristique du bouton de contrôle de 1’oxygene ; un dispositif de prévention en cas de panne dans la canalisation d’alimentation d’oxygene avec une alarme; une soupape de vidange standard pour 1’oxygene; des conduites d’alimentation incorporant un manométre; un code de couleurs uniforme; une sortie de gaz standardisée; un systéme d’index clés pour les cylindres; des étiquettes descriptives affichant ces dispositifs de sécurité; des soupapes à même les canalisations internes de l’appareil. Des appels d’offre pour achat de groupe ont été suscitees autant pour les améliorations que pour les replacements. Des 212 appareils vérifiés, 127 ont été améliorés (au coût de $100,000), 65 ont été remplaces (au coût de $175,000), trois etaient deja satisfaisants et 17 n’étaient plus requis et furent retires du service de façon permanente. Le programme du Manitoba donne une réponse satisfaisante à une question très importante.
Article PDF
Similar content being viewed by others
References
Continuous flow inhalation anesthetic apparatus (anesthetic machines) for medical use. CSA Pre- liminary Standard Z168.3-M1978. Canadian Stan-dards Association, Rexdale (1978).
Continuous flow inhalation anaesthetic apparatus (anaesthetic machines) for medical use. CSA Stan- dard Z168.3-M1980. Canadian Standards Associa-tion, Rexdale (1980).
Advance standards information. Proposed New CSA Standard Z168.3. Anaesthetic machines. Canadian Standards Association, Rexdale (June 6, 1977).
Compressed gas cylinder valve outlet and inlet connections. CSA Standard B96-1977. Canadian Standards Association, Rexdale (1977).
Standard Paint Colors. Part 1: Color identification and selection CGSB Standard l-GP-12c-78. Cana- dian Government Specification Board, Ottawa.
Craig, D.B. & LonGmuir, J.: Anaesthetic machine pipeline inlet pressure gauges do not al- ways measure pipeline pressure. Canad. Anaes. Soc. J.27: 510–511(1980).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Craig, D.B., Longmuir, J. Implementation of canadian standards association z168.3- m 1980 anaesthetic gas machine standard: The Manitoba experience. Canad. Anaesth. Soc. J. 27, 504–509 (1980). https://doi.org/10.1007/BF03007054
Issue Date:
DOI: https://doi.org/10.1007/BF03007054