Skip to main content
Log in

Univariant Eutetic growth in ternary Al-Cu-Ag-alloys

  • Published:
Microgravity - Science and Technology Aims and scope Submit manuscript

Abstract

Within the frame of the joint ESA research program “SETA” (Solidification along a Eutectic path in Ternary Alloys) univariant solidification is investigated in preparation of experiments onboard the ISS. The ternary eutectic alloys under examination belong to the ternary system Al-Cu-Ag. The focus is on coupled eutectic growth of two solid phases along the univariant eutectic groove (marked (1) in fig. 1 and 2) that extends from the binary Al-Cu eutectic towards the ternary nonvariant eutectic with increasing Ag content. This presentation reports on three different approaches to the topic: by means of thermodynamics, experiments and microstructure simulations and their interaction. Experiments and simulations are compared regarding planar and cellular microstructure formation and phase compositions. Thermodynamic data and calculations serve as interpretational link between experiment and simulation and as main input to the simulations.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. Diepers, H. J., Steinbach, I.: Interaction of Interdendritic Convection and Dendritic Primary Spacing: Phase-Field Simulation and Analytical Modeling, to be published in proceedings of International Conference on Solidification and Gravity, Miskolc, Hungary, September 2004

  2. De Wilde, J., Froyen, L.: Solutal configuration during coupled two-phase [α(Al) + θ-Al2Cu] planar univariant eutectic growth in Al-Cu-(Ag, Si) ternary eutectic alloys, accepted for the proceedings of ISPS 2004

  3. Witusiewicz, V. T., Hecht, U., Fries, S.G., Rex, S.: The Ag-Al-Cu system: H. Thermodynamic evaluation of the entire system, J. Alloy. Compd. (accepted)

  4. Rex, S., Hecht, U., Drevermann, A.: Experimental performance within the SCA prototype test 1 using ESA’s Solidification and Quench Furnace (MSL-SQF) on ground, to be published in proceedings of International Conference on Solidification and Gravity, Miskolc, Hungary, September 2004

  5. Sounders, N., Miodownik, A.: CALPHAD, Calculation of Phase Diagrams, A Comprehensive Guide, Elsevier S. Ltd. (1998).

  6. Witusiewicz, V.T., Hecht, U., Fries, S.G., Rex, S.: The Ag-Al-Cu system: I. Reassessment of the constituent binaries, J. Alloy. Compd. (accepted)

  7. Steinbach, I., Pezzotta, F., Nestler, B., Seeβelberg, M., Prieler, R., Schmitz, G. J., Rezende, J. L. L.: A Phase Field Concept for Multiphase Systems, Physica D, vol. 94, p. 135 (1996).

    Article  MATH  Google Scholar 

  8. Tiaden, J., Nestler, B., Diepers, H.-J., Steinbach, I.: The multiphase-field model with an integrated concept for modelling solute diffusion, Physica D, vol. 115, p. 73(1998).

    Article  MATH  Google Scholar 

  9. Böttger, B., Steinbach, I., Fries, S.G., Chen, Q., Sundman, B.: Alloy design for ultra-high temperature steamturbine applications: phase-field simulation of the remelting process in Materials for Advanced Power Engineering 2002, Liege, Belgium, ed. by Lecomte-Beckers, J. (et al.), Jülich: Forschungs-zentrum Jülich, part III, p. 1333 (2002).

  10. Hecht, U., Witusiewicz, V.T., Drevermann, A., Rex, S.: Formation of eutectic cells in ternary Al-Cu-Ag alloys, Adv. Eng. Mater. (accepted)

  11. unpublished experimental results

  12. Rinaldi, M. D., Sharp, R.M., Flemings, M.C.: Growth of ternary composites from melt.2., Metall.Trans., vol. 3, p. 3139 (1972).

    Article  Google Scholar 

  13. Plapp, M. andKarma, A.: Eutectic colony formation: A stability analysis. Phys. Rev. E, vol. 60, p. 6865 (1999).

    Article  Google Scholar 

  14. Rios, C.T., Milenkovic, S., Caram, R.: Directional growth of Al-Nb-X eutectic alloys. J. Cryst.Growth, vol. 211, p. 466 (2000).

    Article  Google Scholar 

  15. Rios, C.T., Milenkovic, S., Gama, S., Caram, R.: Influence of the growth rate on the microstructure of a Nb-Al-Ni ternary eutectic. J. Crystal Growth, vol. 237–239, p. 90 (2002).

    Article  Google Scholar 

  16. Garmong, G.: The directional solidification of Al-Cu-Mg monovariant alloys. Metall. Trans., vol. 2, p. 2025 (1971).

    Google Scholar 

  17. Sayir, A., Framer, S.C.: The effect of the microstructure on mechanical properties of directionally solidified A12O3 / ZrO2(Y2O3) eutectic, Acta mater., vol. 48, p. 4691 (2000).

    Article  Google Scholar 

  18. Akamatsu, S., Faivre, G.: Traveling waves, two-phase fingers and eutectic colonies in thin-sample directional solidification of a ternary eutectic alloy, Phys. Rev. E, vol. 61, p. 3757 (2000).

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Rights and permissions

Reprints and permissions

About this article

Cite this article

Drevermann, A., Hecht, U., Witusiewicz, V. et al. Univariant Eutetic growth in ternary Al-Cu-Ag-alloys. Microgravity sci. Technol. 16, 45–49 (2005). https://doi.org/10.1007/BF02945944

Download citation

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF02945944

Keywords

Navigation